Insignia ns-42pdp (lg pdp42x30000)

Collapse
X
Collapse
 
  • Page of 8
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 6 7 8 template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #101
    Re: Insignia ns-42pdp (lg pdp42x30000)

    Ok, in that case, pin 1 is on the left when that mark faces downwards. Writing should also be readable.

    Capacitors, assuming there are 3 x 10uF 400V?
    http://www.digikey.com/product-detai...540-ND/1086766

    Slightly taller but don't see it being a problem

    And 100uF 35V:
    http://www.digikey.com/product-detai...5165-ND/245024
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • DaveL
        Senior Member
        • Sep 2014
        • 90
        • United States
        #102
        Re: Insignia ns-42pdp (lg pdp42x30000)

        http://www.digikey.com/scripts/DkSea...77272551675132

        http://www.digikey.com/scripts/DkSea...77272551675132

        http://www.digikey.com/scripts/DkSea...77272551675132

        http://www.digikey.com/scripts/DkSea...77272551675132

        This is what I had found and have in my cart at the moment..

          Comment

          • DaveL
            Senior Member
            • Sep 2014
            • 90
            • United States
            #103
            Re: Insignia ns-42pdp (lg pdp42x30000)

            The mark is upper left with the writing readable

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK
                #104
                Re: Insignia ns-42pdp (lg pdp42x30000)

                None of those links work for me...
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  • DaveL
                    Senior Member
                    • Sep 2014
                    • 90
                    • United States
                    #105
                    Re: Insignia ns-42pdp (lg pdp42x30000)

                    I just click each one and they worked for me....

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK
                        #106
                        Re: Insignia ns-42pdp (lg pdp42x30000)

                        I get 404 not found using Google Chrome browser.
                        Can you give me the Digikey part numbers? Ending in "-ND" usually.
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • DaveL
                            Senior Member
                            • Sep 2014
                            • 90
                            • United States
                            #107
                            Re: Insignia ns-42pdp (lg pdp42x30000)

                            Ncp1200d60r2gosct-nd

                            493-7467-1-nd

                            497-5899-5-nd

                            565-1321-nd

                              Comment

                              • tom66
                                EVs Rule
                                • Apr 2011
                                • 32560
                                • UK
                                #108
                                Re: Insignia ns-42pdp (lg pdp42x30000)

                                Everything looks OK although I would replace the 400V capacitors with what was previously suggested. This is due to the higher ripple current specification which should mean they last longer.
                                http://www.digikey.com/product-detai...540-ND/1086766
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment

                                  • DaveL
                                    Senior Member
                                    • Sep 2014
                                    • 90
                                    • United States
                                    #109
                                    Re: Insignia ns-42pdp (lg pdp42x30000)

                                    Ok...I swapped those caps out.

                                    Is there any thing else I may need before I submit my order?

                                      Comment

                                      • tom66
                                        EVs Rule
                                        • Apr 2011
                                        • 32560
                                        • UK
                                        #110
                                        Re: Insignia ns-42pdp (lg pdp42x30000)

                                        I'd get a reel of Chemtronics solder wick
                                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                          Comment

                                          • DaveL
                                            Senior Member
                                            • Sep 2014
                                            • 90
                                            • United States
                                            #111
                                            Re: Insignia ns-42pdp (lg pdp42x30000)

                                            The FDA 59N25 mosfets came in Friday..I installed those.
                                            The order from Digi-Key should be here Monday.

                                              Comment

                                              • DaveL
                                                Senior Member
                                                • Sep 2014
                                                • 90
                                                • United States
                                                #112
                                                Re: Insignia ns-42pdp (lg pdp42x30000)

                                                The package from Digi-Key didn't show up today...maybe tomorrow.

                                                  Comment

                                                  • DaveL
                                                    Senior Member
                                                    • Sep 2014
                                                    • 90
                                                    • United States
                                                    #113
                                                    Re: Insignia ns-42pdp (lg pdp42x30000)

                                                    Everything came in the mail yesterday...
                                                    I installed the mosfets last night...
                                                    I installed the caps and the little switching chip..
                                                    I noticed that when I had removed the chip that I had a bare (no solder point) on the board...I installed the chip any way...
                                                    I screwed the little board up when I removed the chip..all I get is sound...no pic.
                                                    I am pissed at myself now...
                                                    I guess I will have to order the whole Y board now.
                                                    Last edited by DaveL; 12-11-2014, 01:32 PM.

                                                      Comment

                                                      • tom66
                                                        EVs Rule
                                                        • Apr 2011
                                                        • 32560
                                                        • UK
                                                        #114
                                                        Re: Insignia ns-42pdp (lg pdp42x30000)

                                                        It may be possible to repair that little board if you can get me a clear picture of the damage. Is there any way you can borrow a camera? It would really help, otherwise I can't really advise.
                                                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                                          Comment

                                                          • DaveL
                                                            Senior Member
                                                            • Sep 2014
                                                            • 90
                                                            • United States
                                                            #115
                                                            Re: Insignia ns-42pdp (lg pdp42x30000)

                                                            I've been talking with a guy here in Tennessee...
                                                            He has a board with a bad chip (the one under the big heat sink).
                                                            I can get the board and the buffer for about 50.00 dollars..

                                                            I burnt the spot on this board pretty bad trying to get some solder to stick with no avail...I really think it is beyond repair at this point...still pissed at myself every time I look at it..I'll try to take this as a "lesson learned"...

                                                              Comment

                                                              • tom66
                                                                EVs Rule
                                                                • Apr 2011
                                                                • 32560
                                                                • UK
                                                                #116
                                                                Re: Insignia ns-42pdp (lg pdp42x30000)

                                                                I suppose you could take the -Vy module off the bad board and put it on yours - assumjng the module is good.

                                                                The silver pads are glued on. You can scrape off solder-mask (green stuff) ovrr the copper to make the connection. This only works if the copper is easily accessible.
                                                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                                                  Comment

                                                                  • DaveL
                                                                    Senior Member
                                                                    • Sep 2014
                                                                    • 90
                                                                    • United States
                                                                    #117
                                                                    Re: Insignia ns-42pdp (lg pdp42x30000)

                                                                    I'm an idiot at times...
                                                                    I didn't plug the small ribbon connector at the lower right corner in...
                                                                    I have a picture..still the same...little specs of red and green if you get up close and look and the screen still "flickers" very faintly...

                                                                      Comment

                                                                      • DaveL
                                                                        Senior Member
                                                                        • Sep 2014
                                                                        • 90
                                                                        • United States
                                                                        #118
                                                                        Re: Insignia ns-42pdp (lg pdp42x30000)

                                                                        Ahhh..but something is wrong.
                                                                        After about 5 minutes the tv shut off and the red light on the power board has come on..
                                                                        Last edited by DaveL; 12-12-2014, 02:22 PM.

                                                                          Comment

                                                                          • tom66
                                                                            EVs Rule
                                                                            • Apr 2011
                                                                            • 32560
                                                                            • UK
                                                                            #119
                                                                            Re: Insignia ns-42pdp (lg pdp42x30000)

                                                                            Did you try power cycling, could just be no signal turn off.

                                                                            The -Vy module will be bad if the pad is lifted, so the fault will likely remain the same regardless.

                                                                            These older LG based panels are pretty hard to repair, so don't blame yourself if you're finding it difficult. I don't touch them any more, I consider them horrid!
                                                                            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                                                            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                                                              Comment

                                                                              • DaveL
                                                                                Senior Member
                                                                                • Sep 2014
                                                                                • 90
                                                                                • United States
                                                                                #120
                                                                                Re: Insignia ns-42pdp (lg pdp42x30000)

                                                                                I'm finding them "horrid" myself!
                                                                                I found another board..exact same board...
                                                                                I have sound and no picture with the "new" board"...(gave 20.00 for it...figured I could scavenge the Vy module if nothing else)
                                                                                This board has a blown fuse (closest to the capacitors)..If that means anything.
                                                                                I hooked this board up to make sure it had sound and no picture...
                                                                                Besides the blown fuse this board looks to be in better shape than the original board.

                                                                                  Comment

                                                                                  Previous 1 2 3 4 5 6 7 8 template Next

                                                                                  Related Topics

                                                                                  Collapse
                                                                                  • cajoeg
                                                                                    Insignia NS-LCD019-09 issue: Power light turns blue for 3 seconds, the flashes red before going solid read again
                                                                                    by cajoeg
                                                                                    Hello, I'm new to the group and to trying to repair a LCD TV. During the past few years, I've been collecting/repairing/restoring vintage personal computers (Commodore, Apple II, Atari, TRS-80, Texas Instruments, and Timex Sinclair). This has been my retirement hobby. Now I've gotten interested in trying to repair a LCD TV that I have and used regularly when working on vintage computers.

                                                                                    The LCD I'm working on is a Insignia NS-LCD019. I've downloaded the service manual that I could find, but it must be a different revision since not too many items in the service manual match the TV...
                                                                                    02-10-2025, 04:01 PM
                                                                                  • oneduane
                                                                                    Samsung Plazma Blues Model PN59D550C1F
                                                                                    by oneduane
                                                                                    I Am Looking For Some Direction, Or Suggestions On Where I Should Focus My Attention. I Have A 59 Inch Samsung Plazma Tv. The Tv Was Working Decently, Maybe Once In A Blue Moon, I Had To Unplug And Plug It Back In, As The Tv Would Just Shut Down And The Standby LED Light Would Come On And Stay On. If You Tried To Turn The Set Back On, The LED Standby Light Would Blink Rapidly Until You Released The Remote Button. Too Fast For Flash Codes. Once Plugged Back In, The Set Would Work Fine, Sometimes For Months. I Took The Back Off Of It, As The Was Some Distorted Pixels On The Right Side About 1/2...
                                                                                    09-07-2023, 08:17 PM
                                                                                  • valvashon
                                                                                    Insignia NS-LCD19-09 no standby LED; (new problem)
                                                                                    by valvashon
                                                                                    Having a new problem with the 19" Insignia that I modified with one of my automatic turn on circuits. That is now completely disconnected so that is not the issue. I was doing some modifications on that circuitry and managed to short something out on the underside of the power board.
                                                                                    Actually found and bought the service manual (who knew it was even available?!) which brought me to the High Voltage Startup Circuit controller chip.
                                                                                    Looking up that chip number- LD7575APS brought me to the attached datasheet. I have marked my voltage readings on the schematic sheet (open in new...
                                                                                    08-30-2023, 10:41 AM
                                                                                  • howardc64
                                                                                    Insignia NS-43D420NA20 backlight on no display - LCD panel burn failure
                                                                                    by howardc64
                                                                                    Eventually discovered a burn mark near lower corner of LCD. Here is a summary
                                                                                    • Backlight on, no image
                                                                                    • Disconnect right buffer board (view from front), left side display comes on
                                                                                    • Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
                                                                                    • Buffer board is pretty simple
                                                                                    Removed the front bezel to examine edge of the glass. Found burn mark on lower right (view from front). Plastic bezel covering the burn mark region shows heat signature on the inside surface facing the LCD panel. Last 2 pics. Bright...
                                                                                    07-11-2025, 04:04 PM
                                                                                  • arnard
                                                                                    Insignia NS-32L430A11 backlight issue
                                                                                    by arnard
                                                                                    I have a weird backlight issue on the above Insignia Plasma that I am coming up empty on researching.

                                                                                    The display is darker on the left than on the right side of the screen. It uses 4 U shaped plasma tubes. I have had it apart deep enough to tell you that the tubes are bright as they should be at the electrode ends but dim as they get to and go around the bend.

                                                                                    Since it is all 4 tubes it seems like it would be an inverter/backlight board but obviously can't be a blown up component as it does still somewhat work. I'm thinking low voltage but no idea where to go beyond...
                                                                                    06-10-2023, 01:36 AM
                                                                                  • Loading...
                                                                                  • No more items.
                                                                                  Working...