Bush lcd40fhda8

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Robbiboy1970
    New Member
    • Aug 2014
    • 6
    • England

    #1

    Bush lcd40fhda8

    Ok so I got given this LCD by a friend who was clearing his garage "it won't turn on" he said ,,,,,,I've tested the voltage on psu seems fine ,the backlight works ,so I'm guessing main board problem but don't know how to check these " EEPROM" ,,,,so I ordered a replacement board from TVparts uk now I get bad solariziation on screen,,,,two questions ,,can my original board be repaired or my replacement board be reset (on option byte) but I need a service code
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Bush lcd40fhda8

    Would help to post pictures of the fault.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • Clydeuk
      Senior Member
      • Jan 2012
      • 193

      #3
      Re: Bush lcd40fhda8

      Is the main board you got identical (as in from the same TV/correct display type). This problem is common if the board is for a different display. In some sets you can change display type in the service menu, but if it's a recent Vestel chassis you would need to change the firmware, I've had no luck getting firmware from Vestel (other than for Comet OEM products)

      Comment

      • Robbiboy1970
        New Member
        • Aug 2014
        • 6
        • England

        #4
        Re: Bush lcd40fhda8

        yes identical boards,,,when i ordered the replacement board i quoted the model number..i can go into software update but what with and where from is another matter..her are some pics of the 2 identical boards
        Attached Files

        Comment

        • vinceroger69
          Badcaps Legend
          • Mar 2012
          • 6714
          • uk

          #5
          Re: Bush lcd40fhda8

          Originally posted by Robbiboy1970
          yes identical boards,,,when i ordered the replacement board i quoted the model number..i can go into software update but what with and where from is another matter..her are some pics of the 2 identical boards
          can you post a picture of the fault shown on the tv screen i see toms asked you for the same too.

          Comment

          • selldoor
            Slow Learner
            • Dec 2010
            • 7870

            #6
            Re: Bush lcd40fhda8

            Pictures are poor - need to be in focus - are they Vestel? What are the board numbers.
            Please upload pictures using attachment function when ask for help on the repair
            http://www.badcaps.net/forum/showthread.php?t=39740

            Comment

            • Robbiboy1970
              New Member
              • Aug 2014
              • 6
              • England

              #7
              Re: Bush lcd40fhda8

              ok, here are some pics of "solarization" and a settings menu..main board no: T.MD306.9A 10331.........PSU no:MLT668L-VM
              Attached Files
              Last edited by Robbiboy1970; 08-11-2014, 01:55 PM. Reason: add model numbers

              Comment

              • selldoor
                Slow Learner
                • Dec 2010
                • 7870

                #8
                Re: Bush lcd40fhda8

                Ok you need to find the Tcon Board get the board number and post it
                Please upload pictures using attachment function when ask for help on the repair
                http://www.badcaps.net/forum/showthread.php?t=39740

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA

                  #9
                  Re: Bush lcd40fhda8

                  If the panel is made by AUOPTO, the T-CON should looks something like this:
                  http://flattvparts.co.uk/bush-lcd40f...w04-vb-ctrl-bd
                  Or SAMASUNG panel version:
                  http://www.ebay.com/itm/V460H1-C11-V...-/281111520069
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment

                  • Robbiboy1970
                    New Member
                    • Aug 2014
                    • 6
                    • England

                    #10
                    Re: Bush lcd40fhda8

                    t-con board number T315hw04 v0 ..
                    Last edited by Robbiboy1970; 08-11-2014, 02:30 PM.

                    Comment

                    • budm
                      Badcaps Legend
                      • Feb 2010
                      • 40746
                      • USA

                      #11
                      Re: Bush lcd40fhda8

                      Which versions? V0? look at the numbers on the barcode sticker.
                      V3: http://www.shopjimmy.com/auo-55-46t0...-con-board.htm

                      V0: http://www.shopjimmy.com/auo-55-46t0...-con-board.htm
                      Last edited by budm; 08-11-2014, 02:45 PM.
                      Never stop learning
                      Basic LCD TV and Monitor troubleshooting guides.
                      http://www.badcaps.net/forum/showthr...956#post305956

                      Voltage Regulator (LDO) testing:
                      http://www.badcaps.net/forum/showthr...999#post300999

                      Inverter testing using old CFL:
                      http://www.badcaps.net/forum/showthr...er+testing+cfl

                      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                      http://s807.photobucket.com/user/budm/library/

                      TV Factory reset codes listing:
                      http://www.badcaps.net/forum/showthread.php?t=24809

                      Comment

                      • selldoor
                        Slow Learner
                        • Dec 2010
                        • 7870

                        #12
                        Re: Bush lcd40fhda8

                        Ok so you need to test and list the 13 gl voltages that are in a line with 1 below - the description for them is above,
                        There is also another 4 points I cant see the description for and i that is VGH
                        there should also be a VGL if you can spot it.
                        Attached Files
                        Please upload pictures using attachment function when ask for help on the repair
                        http://www.badcaps.net/forum/showthread.php?t=39740

                        Comment

                        • Robbiboy1970
                          New Member
                          • Aug 2014
                          • 6
                          • England

                          #13
                          Re: Bush lcd40fhda8

                          ok here goes from left to right on pic above,, the point on its own 27.2 the 4 together read .023 , .006 , 0.1 , 1.3 , the points (long combo) 0.6 , 3.1 , 4.6 , 5.4 , 7.2 , 7.7 , 8.5 , 9.0 , 9.9 , 10.7 , 12.2 , 14.8 , ,,,the point under them on its own is 15.1,,,,there are 4 other points near the connector all around 3.1

                          Comment

                          Related Topics

                          Collapse

                          • Tynan Dill
                            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                            by Tynan Dill
                            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                            Upon bringing it home and plugging it up, it showed a standby light.

                            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                            The screen seems to blackout and stay black, but with a flashlight I can see the display.

                            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                            Assuming...
                            11-22-2024, 01:46 PM
                          • boosti45
                            Macbook pro logic board replacement parts quesion
                            by boosti45
                            i have a 2020 macbook pro 13" A2251 with 820-09149 logic board so i found an issue with chip labeled U6903 according to schem. boardview using flexBV software, so i removed it from the board and the issue im having is that the chip says "07A08FI ELC180​" on top of it but when searching for a replacement chip, i can find tons of identical looking chips that also have "ELC180" printed on them but the first set of digits is never the same so im trying to find out if i need this exact chip with these same numbers as mine and if not which ones are compatible as a replacement?...
                            08-21-2024, 05:23 AM
                          • Cvrado
                            Led TV Board Replacement, same part number and model, different size
                            by Cvrado
                            Hello my friends!
                            I have a question that I think you can answer and help me with!

                            I have a faulty main board from an led TV. And I found the same part number board and design but is from a 43" TV and I want to use it on a 65". On its stickers , all are the same except the wattage for the LEDs backlight, both state different watts and LED Voltages!

                            So I presume that the backlight inverter section from the replacement board has lower wattage then the original one, am I right?

                            My concern is that the board won't draw enough voltage to the bac...
                            03-02-2024, 05:05 PM
                          • eum
                            PSU Board repair or replacement Ecler Nuo 2.0 DJ mixer
                            by eum
                            Hi,
                            I try to repair this fly-back type PSU, I diagnosed (identifiable) dead N-MOS and fuse, but there are 3 smd resistors on the bottom that burned and became unreadable.

                            The support in charge of the brand in France managed to get me the schematics from Ecler, but it didn't include the PSU board. After a while they finally told me that the unit was too old so they don't have the PSU board schems.

                            I can find replacement PSU board online, but only for the Nuo 3 or 4 or 5, and it seems they ar compatible with each other, as I often find boards compatible with these...
                            07-28-2023, 03:05 PM
                          • Hakuu
                            LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                            by Hakuu
                            Hi There,

                            This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                            After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                            More Details

                            TV Model - LG OLED77G1PUA

                            Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                            07-12-2023, 02:37 PM
                          • Loading...
                          • No more items.
                          Working...