Check the uClamp6514P (UCLAMP6514P.TNT) or uClamp4014P
Hisense H55U7B vertical stripes
Collapse
This topic has been answered.
X
X
-
https://www.badcaps.net/forum/troubl...96#post3489096Last edited by howardc64; 06-28-2025, 11:19 AM.Comment
-
Comment
-
at my post #22 i wrote scrap it, why i did , we are talking on gate transistor inside the glass panel, its the always the main problem to let ESD diode get difect, ESD are just protection, remove them from buffer TV will work, but we still have the gate play crazy,,, lets go over all posts about same ESD issue ir replaced or just removed... did their TV still working ?? i have big doubt ..Comment
-
Very interesting Diah, that does make me wonder if they are failing again after replacement and or failing if left off.Comment
-
at my post #22 i wrote scrap it, why i did , we are talking on gate transistor inside the glass panel, its the always the main problem to let ESD diode get difect, ESD are just protection, remove them from buffer TV will work, but we still have the gate play crazy,,, lets go over all posts about same ESD issue ir replaced or just removed... did their TV still working ?? i have big doubt ..Comment
-
Comment
-
Just to address the experts on this post complaining about the new layout. previous vbulletin had major security issues so there was no choice to upgrade. I have made alternate (including dark mode) available in the footer and will release more soon.
As for being ad revenue orientated. this site makes a significant loss each month which is only partly subsidized by ads.Comment
-
Comment
Related Topics
Collapse
-
by Daren87Hello everyone,
I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the... -
by ahoonidHey everyone,
I bought a MacBook A1990 with no screen. I bought it knowing the motherboard was defective but wasn't sure what the problem was until I received it. It actually turns on but as you see from the attachment, it has vertical stripes, on an external screen!!
The board is neat. Not opened before for sure. Just a little dust, nothing more.
Recovery using wifi can be opened, as can also be seen in the photo but it doesn't go all the way through after connecting it to a wifi. It downloads the initial Recovery files but never completes the rest of the... -
by jason123Hello all. 3 years back, with your help, I replaced the LEDs on this TV. It's been working great. Yesterday, I turned it on (garage TV), and it has blurred horiz / vert lines as you see in photos. Definitely no physical hit or damage. Top 1/6th of the screen is perfect. Could it be main / TCON board? No tabs to cut on this model. Thank you...07-19-2025, 08:07 AM
-
by kevinmanHi, TV boots with distorted image right side mirrored verticaly sometimes vertical stripes making off-on turns picture to normal and "perfect" (netflix image) that I highly doubt this is something related with t-con signal lines?? rather it looks software corruption bad mem chips voltage collapse or an intantaneous fault with fluctuating powerboard voltages?? As it happens usually when TV is cold sometimes fault comes back after a full day use should I check powerboard voltages with oscilloscope??4 Photos
-
by mopensteinI'm working on my 27" RCA console TV built in 1990. It had some vertical rollover for a few months that went away after being powered on for a few minutes. I had been meaning to open it up and check it out but it had total vertical collapse before I could get to it.
Now that I have the time I opened it up and found a couple leaky capacitors around the vertical ic. So I figured the caps went bad and cooked the vertical IC.
I got the caps out and replacements on order. But when I took out the Vertical IC I saw that the chip numbers have been almost completely wiped... - Loading...
- No more items.
Comment