Samsung "MU" series (UN, UA, UExxMUxxxx) fault dump IC1604 25Q40...

[lotas]

Thanks a lot for your reply.

I made a terrible mistake. You are right, the ic is different. And I could find the correct one.

I attached the file, please clean my bin archive.

Thanks again for your help and guidence

Your dump is fine, working, so the problem is somewhere else, maybe the panel.

[zaratustrax]

First at all Thanks for taking the time and check my file.

As you said the problem is some where else. I was looking for and I discovered that the problem is on the panel side.

I made a trick, I dissabled the Tcon protection which detetcs if the panel is connected to the Main board. So I could discovered where the problem was. And it is on the left side.

This tv has two boards in which are Soldered the cofs. So we have a 'board-cof' left and right. And also each one is divided in two board connected through a Coffee color flex.

I cheked this part and I couldnt find any Short or low resistente, I also try to dissabled the board in which the problem is cutting the ckv lines and covering with tape the voltages lines.

At this point I am stuck. I am wondering if the problem are the cofs or this side of the panel is broken or something.

Could you please tell me another way to 'turn off' or dissable this part of the panel in which the problem is?

Again, Thanks a lot for your help

[lotas]

Initially, you posted a dump from T-con IC1603 25Q80, was it native to this TV or did you already record someone else's dump into it?

[zaratustrax]

It was native from my tv

[srdi]

The TV does not turn on, there is no standby mode! SAMSUNG UE40MU6402

[lotas]

The TV does not turn on, there is no standby mode! SAMSUNG UE40MU6402

Try.

[srdi]

Try.

Thank you very much!! Everything is working!

[edukojak]

Hello friends. I'm new here and I noticed that everyone helps each other. I'm from Brazil and I'm looking for the bios for the Samsung 50 MU6100G BN41 02568A BN49 12418K TV. Does anyone have this?

[lotas]

Hello friends. I'm new here and I noticed that everyone helps each other. I'm from Brazil and I'm looking for the bios for the Samsung 50 MU6100G BN41 02568A BN49 12418K TV. Does anyone have this?

Other people's dumps won't help you, post your non-working dump here, I'll fix it for you.

[edukojak]

ok friend thank you very much I will do that

[murtagh]

Hi Lotas ,can you fix this file please. I have used some of your files before and they worked ,thank you. Samsung UE49MU6500 BN41-02568 ic1604.
Murtagh,
Ireland.

[lotas]

Hi Lotas ,can you fix this file please. I have used some of your files before and they worked ,thank you. Samsung UE49MU6500 BN41-02568 ic1604.
Murtagh,
Ireland.

Hi, try.

[murtagh]

Hi Lotas, this file worked perfectly. You are truly a Legend.
Many Thanks.
Murtagh.
Ireland.

[lotas]

Hi Lotas, this file worked perfectly. You are truly a Legend.
Many Thanks.
Murtagh.
Ireland.

Hello! Thank you!

[a_lik]

Hi Lotas ,can you fix this file please. I have no standby light ,thank you. Samsung UA55JU6000K BN94-09309Z

[lotas]

The problem is not inclusion here in the xxMUxxxx series, you have a completely different chassis.

[a_lik]

i'm sorry my bad, i'll go to "eeprom dump thread. thx

[hazi12]

Hi, is it possible to fix 25Q40CL listing in ASprogrammer , but I don't have CH341A I only have RT809F and there is no option to select hardware? Thank you.

[SMDFlea]

Hi, is it possible to fix 25Q40CL listing in ASprogrammer , but I don't have CH341A I only have RT809F and there is no option to select hardware? Thank you.

ASprogrammer software only works with the CH341A ,it is not meant to work with the RT809F. The RT809F is a good programmer, chip support can be added manually if the chip is not in the latest support list.

[lotas]

I only have RT809F and there is no option to select hardware? Thank you.

Everything is there and it (RT809F) supports it!

[hazi12]

I've tried unchecking the protection, unchecking all the boxes and then I want to write and then I want to delete and it writes an error, it can neither delete nor write, there is still protection probably on.