I tried with a Monterrey and Apple configurator says it needs Sonoma

It was native from my tv

First at all Thanks for taking the time and check my file.

As you said the problem is some where else. I was looking for and I discovered that the problem is on the panel side.

I made a trick, I dissabled the Tcon protection which detetcs if the panel is connected to the Main board. So I could discovered where the problem was. And it is on the left side.

This tv has two boards in which are Soldered the cofs. So we have a 'board-cof' left and right. And also each one is divided in two board connected through a Coffee color flex.

I cheked this...

Thanks a lot for your reply.

I made a terrible mistake. You are right, the ic is different. And I could find the correct one.

I attached the file, please clean my bin archive.

Thanks again for your help and guidence...

Hi everybody.
I have a similar problem with my Samsung Un55mu6300.
​​​​​​
When I plug the cable the leds turn on and off. If I disconect the Mainboard the leds keep on.

I was trying to fix and I already programed the bios chip using the programmer tl866ii, but no luck.

Browsing a lot I found this post and I beg you to clear my bin file please.

In addition I want to point that my file is 1024 kbytes Long, but to my surprise the files that the People have uploaded in this topic is half the size. I thought that maybe the chip...

Hi everyone. Thanks for sharing this information
I am fixing an hp elitebook g2

And a chip is burned.

The code is 4m=1f

Dose anyone know what kind of ic is this?

I attached an image

Thanks for your help...