Re: Task TK-940TX-DF Blowing fuse
i found both of zeners in a small plastic bag, with (post)#24 written on it.
Both of them have "18 2" printed on them.
They didn't do a good job of protecting the 5VSB MOSFET, or one of the main PSU MOSFETs
Neither of the MOSFETS should have being short-damaged; as both of the zeners would have conducted at 18V, which is well below the rated MOSFET gate voltages of 30V
i found both of zeners in a small plastic bag, with (post)#24 written on it.
Both of them have "18 2" printed on them.
They didn't do a good job of protecting the 5VSB MOSFET, or one of the main PSU MOSFETs
Neither of the MOSFETS should have being short-damaged; as both of the zeners would have conducted at 18V, which is well below the rated MOSFET gate voltages of 30V
Comment