Re: Samsung UN65MU9000FXZA Horizontal Lines (Constant and Flickering)

Have you tried looking into tconboard?

Re: Samsung UN65MU9000FXZA Horizontal Lines (Constant and Flickering)

If the tv is only 2 years old try contacting [email]Officeofpresident@sea.samsung.com[/email] explain your issue. Theyre currently helping me even being out of warranty. GoodluckRe: Samsung UN65MU9000FXZA Horizonta...anty. GoodluckRe: Samsung UN65MU9000FXZA Horizontal Lines (Constant and Flickering)

Re: Samsung UN65KS9800FXZA T-con fuse blowing

Anyone else have an input on why the tcon fuse always blows when connecting the left side ribbon cable?

Re: Samsung UN65KS9800FXZA T-con fuse blowing



I tried they basically told me to go to he** so im here with little knowledge trying to fix it...

Re: Samsung UN65KS9800FXZA T-con fuse blowing

So im still at work soni havnt been able to check the ohms So hypothetically speaking to be armed with as much knowledge as possible lets say the panel boards are good no shorts. What would cause the tcon fuse to blow almost automatically from plugging in the left side ribbon and not the right? Or the does the problem specifically isolate to the panel boards being bad being the half screen issue? I.e leftside is white and the right side i have a clear picture*check post#1 for picture.

The panel cant be bought i spent...

Re: Samsung UN65KS9800FXZA T-con fuse blowing



What ohms is normal?...

Re: Samsung UN65KS9800FXZA T-con fuse blowing



Not really no but i know someone that can kinda walk le through. Would that bad capacitor constantly cause the tcon board fuse to fail if i don't connect just the left side? And as for the picture on post#1 does that mean the panel could potentially be bad? Sorry im new at this...

Re: Samsung UN65KS9800FXZA T-con fuse blowing

Im sorry dont know much but can the capacitor be replaced in that location?

Hi all, so i was watching tv acreen went black and no sound. Traced problem to blown tcon fuse. Replaced and it blows replaced again samething. So my tcon fuse keeps blowing. I bought a new board havent installed yet infear its just going to keep blowing the fuse. If i only connect the right side ribbon cable the fuse doesnt blow but as soon as i connect the left cable my tcon fuse instantly blows and no picture. The right side picture works clear as day and left side picture is grey (picture attatched) im hoping its a bad tcon board itself or a cable or anything and not the panel. Thank you for...

Re: New Members - please post your introductions here

Thanks for the acceptance into this forum looking forward to learning alot!