Samsung UN65KS9800FXZA T-con fuse blowing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bootleg1
    Member
    • Feb 2020
    • 10
    • USA

    #1

    Samsung UN65KS9800FXZA T-con fuse blowing

    Hi all, so i was watching tv acreen went black and no sound. Traced problem to blown tcon fuse. Replaced and it blows replaced again samething. So my tcon fuse keeps blowing. I bought a new board havent installed yet infear its just going to keep blowing the fuse. If i only connect the right side ribbon cable the fuse doesnt blow but as soon as i connect the left cable my tcon fuse instantly blows and no picture. The right side picture works clear as day and left side picture is grey (picture attatched) im hoping its a bad tcon board itself or a cable or anything and not the panel. Thank you for all your help!!!
    Attached Files
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk

    #2
    Re: Samsung UN65KS9800FXZA T-con fuse blowing

    maybe a shorted capacitor on the pcb thats bonded on to the lcd panel
    this video shows the pcb board that maybe giving you issues (from about 9 minutes in)
    https://www.youtube.com/watch?v=jLd6QO7Z7m4
    Last edited by vinceroger69; 02-04-2020, 05:50 AM.

    Comment

    • Bootleg1
      Member
      • Feb 2020
      • 10
      • USA

      #3
      Re: Samsung UN65KS9800FXZA T-con fuse blowing

      Im sorry dont know much but can the capacitor be replaced in that location?

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA

        #4
        Re: Samsung UN65KS9800FXZA T-con fuse blowing

        Originally posted by Bootleg1
        Im sorry dont know much but can the capacitor be replaced in that location?
        Yes if you experience with SMD repair.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • Bootleg1
          Member
          • Feb 2020
          • 10
          • USA

          #5
          Re: Samsung UN65KS9800FXZA T-con fuse blowing

          Originally posted by budm
          Yes if you experience with SMD repair.
          Not really no but i know someone that can kinda walk le through. Would that bad capacitor constantly cause the tcon board fuse to fail if i don't connect just the left side? And as for the picture on post#1 does that mean the panel could potentially be bad? Sorry im new at this

          Comment

          • budm
            Badcaps Legend
            • Feb 2010
            • 40746
            • USA

            #6
            Re: Samsung UN65KS9800FXZA T-con fuse blowing

            Well, did you start checking the resistance of the caps on the tab bonding board as suggested? That is what you should be testing right now.
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • Bootleg1
              Member
              • Feb 2020
              • 10
              • USA

              #7
              Re: Samsung UN65KS9800FXZA T-con fuse blowing

              Originally posted by budm
              Well, did you start checking the resistance of the caps on the tab bonding board as suggested? That is what you should be testing right now.
              What ohms is normal?

              Comment

              • budm
                Badcaps Legend
                • Feb 2010
                • 40746
                • USA

                #8
                Re: Samsung UN65KS9800FXZA T-con fuse blowing

                Just look for very low Ohms reading, <100 Ohms, that will indicate issue with either caps or IC's.
                Never stop learning
                Basic LCD TV and Monitor troubleshooting guides.
                http://www.badcaps.net/forum/showthr...956#post305956

                Voltage Regulator (LDO) testing:
                http://www.badcaps.net/forum/showthr...999#post300999

                Inverter testing using old CFL:
                http://www.badcaps.net/forum/showthr...er+testing+cfl

                Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                http://s807.photobucket.com/user/budm/library/

                TV Factory reset codes listing:
                http://www.badcaps.net/forum/showthread.php?t=24809

                Comment

                • Bootleg1
                  Member
                  • Feb 2020
                  • 10
                  • USA

                  #9
                  Re: Samsung UN65KS9800FXZA T-con fuse blowing

                  So im still at work soni havnt been able to check the ohms So hypothetically speaking to be armed with as much knowledge as possible lets say the panel boards are good no shorts. What would cause the tcon fuse to blow almost automatically from plugging in the left side ribbon and not the right? Or the does the problem specifically isolate to the panel boards being bad being the half screen issue? I.e leftside is white and the right side i have a clear picture*check post#1 for picture.

                  The panel cant be bought i spent 4k on this tv three years ago so im just arming my self with all the knowledge i can before tearing into the tv deeper. Thank you for sharing your thoughts.

                  Comment

                  • petehall347
                    Badcaps Legend
                    • Jan 2015
                    • 4422
                    • United Kingdom

                    #10
                    Re: Samsung UN65KS9800FXZA T-con fuse blowing

                    can you not claim from samsung as not fit for purpose as you expect it to last more than 3 years ?

                    Comment

                    • Bootleg1
                      Member
                      • Feb 2020
                      • 10
                      • USA

                      #11
                      Re: Samsung UN65KS9800FXZA T-con fuse blowing

                      Originally posted by petehall347
                      can you not claim from samsung as not fit for purpose as you expect it to last more than 3 years ?
                      I tried they basically told me to go to he** so im here with little knowledge trying to fix it

                      Comment

                      • diif
                        Badcaps Legend
                        • Feb 2014
                        • 6978
                        • England

                        #12
                        Re: Samsung UN65KS9800FXZA T-con fuse blowing

                        Originally posted by petehall347
                        can you not claim from samsung as not fit for purpose as you expect it to last more than 3 years ?
                        No, we claim from the vendor not the manufacturer. In this case I think he would win, a 4 grand TV should last longer than three years. I believe we have stronger consumer laws than the US though.

                        Comment

                        • Bootleg1
                          Member
                          • Feb 2020
                          • 10
                          • USA

                          #13
                          Re: Samsung UN65KS9800FXZA T-con fuse blowing

                          Anyone else have an input on why the tcon fuse always blows when connecting the left side ribbon cable?

                          Comment

                          • budm
                            Badcaps Legend
                            • Feb 2010
                            • 40746
                            • USA

                            #14
                            Re: Samsung UN65KS9800FXZA T-con fuse blowing

                            Originally posted by Bootleg1
                            Anyone else have an input on why the tcon fuse always blows when connecting the left side ribbon cable?
                            Shorts circuit such as caps on the tab bonding board or short IC, i.e COF.
                            Never stop learning
                            Basic LCD TV and Monitor troubleshooting guides.
                            http://www.badcaps.net/forum/showthr...956#post305956

                            Voltage Regulator (LDO) testing:
                            http://www.badcaps.net/forum/showthr...999#post300999

                            Inverter testing using old CFL:
                            http://www.badcaps.net/forum/showthr...er+testing+cfl

                            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                            http://s807.photobucket.com/user/budm/library/

                            TV Factory reset codes listing:
                            http://www.badcaps.net/forum/showthread.php?t=24809

                            Comment

                            • nomoresonys
                              Badcaps Legend
                              • Jan 2013
                              • 12075
                              • U.S.

                              #15
                              Re: Samsung UN65KS9800FXZA T-con fuse blowing

                              DID you do test in post #8??

                              Comment

                              Related Topics

                              Collapse

                              • Tips
                                Samsung PD27AOQ (BN44-00506B) constantly blowing internal fuse.
                                by Tips
                                Looking for some assistance please.
                                Trying to repair a PD27AOQ samsung power board.
                                Initially had the typical problem of cm806 capacitor blown, additionally thermistor NT801s blown.
                                Replaced the ceramic capacitor, str60252s, bridge rectifier, thermistor and fuse.
                                Testing it the fuse blows immediately power is turned on.
                                diodes dm852 and dm853 test as shorted when in the board but fine when removed.
                                any assistance, guidance would be appreciated.
                                04-11-2024, 11:24 AM
                              • Document Archive
                                Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                                by Document Archive
                                This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                                09-07-2024, 05:50 AM
                              • RogerH58
                                Samsung 46" TV LE46B530 blowing fuse
                                by RogerH58
                                Hi all,

                                I am a newbie and not very experienced so bear with me if i struggle sometimes with technical language - but I'll do my best. I searched "Samsung" and the model number on the forum but didn't find anything I could understand!

                                I'm not an electronics guy - just picked up stuff over the years through my flight-simming hobby.

                                I have the above mentioned 46" tv as the monitor for my flight-sim setup. Recently it went "crack" and stopped working. No standdby light and no response. I assumed a fuse had blown and after investigation...
                                06-10-2023, 10:27 AM
                              • TR103
                                Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                                by TR103
                                Hi, I have a Samsung UE50TU with:
                                - sound and backlight, but no picture
                                - when it arrived, it had a picture for a few seconds
                                - it keeps rebooting
                                - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                                - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                                - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                                - without cable between mainboard and lcd panel and with a jumpered...
                                01-22-2025, 04:12 PM
                              • JJAAMM
                                SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                                by JJAAMM
                                This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                                Problem
                                TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                                07-06-2023, 06:01 AM
                              • Loading...
                              • No more items.
                              Working...