Help me unlock this one please
Hp eliteBook 640 G9
s/n 5CD3411MT7
Mainboard DA0X8SMB8H2
YOU MUST follow these steps :
1) First boot will delay a few minutes
2) IMPORTANT: Go to BIOS Setup ( F10 ) and reset to Factory Default (first main page tab)
3) Restart and enter BIOS
4) 2nd boot restore security settings to defaults
YOU MUST follow these steps :
1) First boot will delay a few minutes
2) IMPORTANT: Go to BIOS Setup ( F10 ) and reset to Factory Default (first main page tab)
3) Restart and enter BIOS
4) 2nd boot restore security settings to defaults
Still locked, first screen is giving me this....anyhelp?
i'm sorry it didn't work coz i haven't noticed its a two bios version for this model. its U75 and U86.
the post number # 355 is U86
this is the new one for U75 HP EliteBook 640 14 inch G9 U75
The patch won't work if the bios version is latest. use this bin flash both it won't work if you only flash the main you should Flash Both.
first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU and put your original DMI.
i'm sorry it didn't work coz i haven't noticed its a two bios version for this model. its U75 and U86.
the post number # 355 is U86
this is the new one for U75 HP EliteBook 640 14 inch G9 U75
The patch won't work if the bios version is latest. use this bin flash both it won't work if you only flash the main you should Flash Both.
first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU and put your original DMI.
Thank you man for your help
both post are FOR U75..!
U86 is not mention at anyone !
rex98 sir i have try your post 355 no luck can you plz unlock my two bios file
Here use this its the new BID U86.
HP EliteBook 640 14 inch G9 U86
The patch won't work if the bios version is latest. use this bin flash both it won't work if you only flash the main you shouldFlash Both.
first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU and put your original DMI.
Comment