Re: IC Marking Codes and Datasheets #2
Richtek Rt8243bzqw
Richtek Rt8243bzqw
-
-
Re: IC Marking Codes and Datasheets #2
Thank you broComment
-
Re: IC Marking Codes and Datasheets #2
IC mark 3G=xx Richtek RT6575A
IC mark 3F=xx Richtek RT6575BComment
-
Re: IC Marking Codes and Datasheets #2
Thank youComment
-
Re: IC Marking Codes and Datasheets #2
I need help identifying this IC, it's from an Intel NUC NUC6CAYB, attached are 2 photos of the IC and 1 photo of a normal motherboard found on the Internet.
I think the marking reads RG5WK or R65WK and the other photo reads RG5VC or R65VC I thinkAttached FilesComment
-
-
Re: IC Marking Codes and Datasheets #2
So I think I found it, but I'm not sure: https://www.ebay.com/itm/334488627756
Is it SYX198CQNC ? What does this IC do? The NUC is flashing RAM problem.Comment
-
Re: IC Marking Codes and Datasheets #2
Appears to be a dual mosfet from Silergy. Replace it from a donor board or from AliExpress.
US $4.59 15%OFF | 10pcs SYX198BQNC SYX198B SYX198 (RF4BJ RF3CG RF2BN RF...) QFN-6
https://a.aliexpress.com/_mNTwNHw
Do share the full markings with the vendor before purchasing.Comment
-
Re: IC Marking Codes and Datasheets #2
Can anyone help me. I have a switching voltage regulator on a DELL Latitude 5430 for 5v power. I can't identify the IC codeAttached FilesComment
-
-
Re: IC Marking Codes and Datasheets #2
What is logic board # of this Dell? LA-**** markings. This part is likely from Silergy.Comment
-
Re: IC Marking Codes and Datasheets #2
DNExxx = SYD370CTMC
Pinout equivalent with this ic on here
https://www.badcaps.net/forum/showpo...81&postcount=3Attached FilesComment
-
-
Re: tps51123 equivalent
who makes IC that resids where 3.3/5V buck is located. it has markings 11 FL 60. I don't have luck finding it.Comment
-
Re: tps51123 equivalent
Post a pic of the part that shows the topside markings.Comment
-
Re: tps51123 equivalent
not able to take picture, using mag glass.
first row :11 FL
second row: 607
no other markings nothings. this is on HP 2570P motherboard part number 6050A2483801-MB-A02Comment
-
Re: IC Marking Codes and Datasheets #2
A diode marked as PJ8017, but I can't find it on Aliexpress.
I need to find the correct part number.Attached FilesComment
-
-
Re: IC Marking Codes and Datasheets #2
I think I found it, using a similar schematic, it seems to be P4SMAFJ20A since they have IV as their marking.
It seems to be a Transient Voltage Suppressor (TVS) diode, can I replace it with a Schottky Diode?Comment
-
Re: IC Marking Codes and Datasheets #2
Can you share more details on which board contains this diode ? PJ may be Panjit (Taiwan).Comment
-
Re: IC Marking Codes and Datasheets #2
It's the G7BF, there's no schematic for it, I think it's similar to DAG7BFMB8D0.Comment
-
Re: IC Marking Codes and Datasheets #2
someone help me figur out this one please
it is in CPU power circute, probably dual mosfet
Acer Chromebook intel Gold CPU
Model Name: CB515-1W
MB: DA0ZBTMBAD0Attached FilesComment
-
-
Thread started and edited by piernov and SMDFlea. All members are welcome to contribute to the thread, if you have any
pictures, suggestions, spot any mistakes or want new content adding send me a PM or just make a post. Thanks
EDIT: See "IC Marking Codes and Datasheets #2" for more posts. All members please post comments in thread #2.
__________________________________________________ __________________________________________________ ________
Click on the name next to the post # to view the single post... -
Ricoh Power Management IC`s Marking Codes
The attached pdf titled "Ricoh PMIC`s Marking Codes,pdf" was made by me from the main pdf Ricoh_MARKINGS.
....06-06-2021, 12:29 PM -
Hello folks, I seem to have a lot of trouble when it comes to distinguishing markings on SMD components especially when it comes to the question of whether it is a 1 or an I. for example, I see components marked NI. It looks just like that. However, I cannot tell if that "I" might be a number one instead. Is there a rule of thumb that manufacturers use when using these characters? Attached is an example. This is just one example out of many I come across but it's a good illustration of my point. I appreciate any input.... -
im working on HP Probook 450 g5 with no power issue and found out coil beside this ic is short to ground...i remove the ic and short gone....ic code AQP,...looking on this ic marking code but not found https://www.badcaps.net/forum/troubl...and-datasheets...
-
Had someone drop off a laptop in which they were upgrading the ram but forgot to unplug the battery.
Looks like the ram RFI shield shorted a rail going to or coming from a Silergy IC which blasted a component off the board. I'm going to assume it was a cap but really have no way to know for sure since this board schematic doesn't appear to be in the wild yet.
I'm trying to identify the IC model now but it doesn't appear to match any of the Silergy codes from https://www.badcaps.net/forum/troubl...-tablets-and-m...
Comment