-
Last edited by Kiriakos GR; 07-23-2014, 08:40 PM. -
Re: Using an ESR Meter (and Reference Chart)
Why, after already being temp banned, do you try and continue to stir shit up?
Is it a Greek thing? Pride? Everybody is dumb except you?
Can't you see this forum family is very peace full and try to help who ever has interest in the same thing that interest us? We don't care if you have the money to buy the best equipment possible or if you can barely afford the cash for a few caps.
There is no discrimination here but the way you are going I might have a thing against Greek.
If you can't say anything useful that contributes to badcaps and what it stands for then shut the fuck up. ( sry, I don't swear normally).Proud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/Comment
-
Re: Using an ESR Meter (and Reference Chart)
Please leave the Greek out of it. Thanks
Comment
-
Re: Using an ESR Meter (and Reference Chart)
Hehe yes, he's not the only greek here.
Why can't we just ignore the somewhat rude comments?
I mean, these words don't really have emotions with them, so it is hard to tell if someone is insulting you or not. Perhaps they are not. People do have their differences.
Just chill folks, it disappoints me to see this...
(Yes I know it happens every day all over the world, but come on!)Muh-soggy-kneeComment
-
Re: Using an ESR Meter (and Reference Chart)
The demonstration of Denial in making savings and in a way a small sacrifice so to get a worthy tool, is not an indication of acting wise.
In a forum there is confused souls and people in need to find something worthy to store in their heads as information.
Only for few in the second category I care about.
.Last edited by Kiriakos GR; 07-24-2014, 05:59 AM.Comment
-
Re: Using an ESR Meter (and Reference Chart)
In the run of equipment people here are likely to be working on is .009 ohms difference in ESR going to make any significant difference in the operation of the equipment?Comment
-
Re: Using an ESR Meter (and Reference Chart)
Electronics circuit design and rules to follow when doing it, is a subject above your class.Comment
-
Re: Using an ESR Meter (and Reference Chart)
The above statement doesn't answer the question, or indeed make any sense at all.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Using an ESR Meter (and Reference Chart)
You are right,I apologize......
I do think that there is no place for him here,don't feed the troll doesn't help either in this case as he just keeps insulting anyone in a VERY rude way...
Pretty much everybody get's along with one and other here,and that is unique for a public forum I'd say....and then he put's his 2 cents in....
Proud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/Comment
-
Re: Using an ESR Meter (and Reference Chart)
Holy crap, you act like that in real live too?
Let me guess, single and no friends.
( that's the last thing I got to say to him,troll sucked me in to his level, I'm over it now).Proud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/Comment
-
Re: Using an ESR Meter (and Reference Chart)
100% Rubbish. Cheaper meters are perfectly fine for said applications, and, in fact, for most applications.
Why are you nagging everyone else about buying expensive tools which they do not require? Seriously, we're all fed up with it.
Because it's obvious that you haven't learned your lesson from when I banned you last time.
That is kind of offensive, you know. You got banned for the same kind of thing last time
And that does it. I warned you last time not to direct posts at another user!!!
I hate to do this to you, but we're all getting fed up.I love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProComment
-
Re: Using an ESR Meter (and Reference Chart)
Gone for good this time? it was so peaceful for a while.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Using an ESR Meter (and Reference Chart)
Thank yo so much for removing him.....Now we can go back to having fun here.....
Proud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/Comment
-
Re: Using an ESR Meter (and Reference Chart)
No problems and yup, he's gone for goodI love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProComment
-
Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
Re: Using an ESR Meter (and Reference Chart)
Don't worry, if c_hegge changes his mind I'll be here to cover up.
I was going to ban him aswell, I just wanted him to stop over the edge just a little bit more..."The one who says it cannot be done should never interrupt the one who is doing it."Comment
-
I read EBOOK of Testing Electronic Component and found that
"In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."
Is it really possible to test small ceramic disc capacitor with analogue... -
Hi
I want to change the scale of an analog meter, to monitor the charge of an li-ion single cell, so the needle at the end would point 4.2 volts and the 0 on the meter would point 2.5 volts or so, i tried to add diodes or a zener in series with the meter but the changes of the ambient temperature also changes the voltage value on the meter
I wonder how i can accomplish this so the meter would be precise at any temperature ?
Thnaks -
About a month ago we had a transformer jumper wire that burned in two different places between two transformers caused over $200 thousand dollars worth of damage to VFD drives at least 10 of them and a memory card and quite a few power supply as well
Now we have most of the equipment that got damaged back up and running except a feeder that has issues and we are waiting for some parts for
Now we also have another piece of equipment that was blowing fuses on the 110 volt controller switch circuit with the “E” stops and one switching power (24 volt) supply and a transformer... -
So a while back, to deal with the fan noise of the old blower style shrouds on the reference cards, I chucked it and installed the monster that is a Raijintek MORPHEUS 8069, with a couple Noctuas on it. Did the job but quite unwieldy tbh.
Anyone know which boards would have a compatible shroud for it? I know the EVGA used the reference board but wondering if any other manufacturers did. I want to put something sensible back on it, but I'm having a hard time getting hold of even a faulty reference board for a reasonable price. -
Greetings, new guy here but always interested in the crazy universe of modding
We just finished construction of around 25 vacation houses, all inside the same private area.
Each house has 3phase power , and we bought an atlas MK10 meter for each house (25 meters total ! )
The metering on a per-house basis is done privately. Its not done by a utility company. The utility company will only charge us for the total consumption of all 25 houses together.
Id like to do a small modification on the firmware of our MK10 to make it easier identify each house's...05-20-2025, 09:09 AM
Comment