Re: Using an ESR Meter (and Reference Chart)
You will discover what I am saying when you will start your new job.
For me Internet use is the same as real life, some door you can cross them only if you complying enough....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse

Kiriakos GR
Banned
Last Activity: 07-25-2014, 09:51 AM
Joined: 05-23-2012
Location: Volos, Magnisia
-
Re: help with a APC ups mod
I believe that this is an protection in case that batteries charger is facing a short circuit.
It supposed that the inrush current in such an event will be enormous....
Leave a comment:
-
Re: help with a APC ups mod
Are you talking about some colored ones ( car Fuse type) ?
Leave a comment:
-
Re: Using an ESR Meter (and Reference Chart)
The demonstration of Denial in making savings and in a way a small [B]sacrifice[/B] so to get a worthy tool, is not an indication of acting wise.
In a forum there is confused souls and people in need to find something worthy to store in their heads as information.
Only for few in the second category I care about.
.Re: Using an ESR Meter (and Reference Chart)
The demonstration of Denial in making savings and in a way a small [B]sacrifice[/B] so to get a worthyLast edited by Kiriakos GR; 07-24-2014, 05:59 AM.
Leave a comment:
-
Re: Using an ESR Meter (and Reference Chart)
Why do you care of where I will be send?
Just continue eating your hamburgers and ice creams and keep crying due internet that your wallet is full of holes....Last edited by Kiriakos GR; 07-23-2014, 08:40 PM.
Leave a comment:
-
Re: Using an ESR Meter (and Reference Chart)
With out an true LCR meter at hand you may not even build an stereo amplifier that both channels will have the same volume output or frequencies response.
Or even confirm that the capacitors which you got from eBay are genuine or not.
Capacitors is an important electronic part, build under strict specifications that cheap ESR meter can not measure for all reasons mentioned all ready.
In electronics with out the proper tool at hand you can not work at all.
Therefore by getting what is needed you...Last edited by Kiriakos GR; 07-23-2014, 06:25 PM.
Leave a comment:
-
Re: help with a APC ups mod
I do not wish to discourage you, but is far complex to modify it than repairing the blown inverter.
Leave a comment:
-
Re: Back-UPS RS 800 Not charging
All APC UPS always need fresh working batteries so the device to pass it self test (at boot up), and then it starts charging them.
Simple as that.
Leave a comment:
-
Re: help with a APC ups mod
Its like seeking for trouble.
All the job regarding charging is made automatically by it electronic controller (main chip).
What makes you think that this one survived from been blown too ?
Leave a comment:
-
Re: Help with component suitability in PLL Transmitter
The use of parts with better specifications in basic applications seems as waste to me, but if works best for you.. then use them.
Regarding the schematic, the picture is not that great for seeing details, what it is important is to not use higher capacity than what is suggested.
Leave a comment:
-
Re: Help with component suitability in PLL Transmitter
There is no need for Low-ESR capacitors on a 4W PLL transmitter.
You will use regular parts, and you will use a transformer based PSU for it, so to avoid a pulsing power supply and all it harmonics.
I am aware that you are after the perfect possible result in your assembly, but this is a classic design that is used for 25 years now, and does not need any magic so to become perfect.
Leave a comment:
-
Re: PC cleanner for free?
I will just pass again my recommendation about Advanced SystemCare 7.
After using it for a year as free, I did pay the yearly fee so to get it.
It does not damage windows registry and it gold point is that makes fine adjusts in windows services and boot up time and all windows operation looks like a fresh OS installed PC.
Ghost 14 and dual Raptor 10.000 rpm in RAID/mirror, for extra safety :-)
Leave a comment:
-
Re: AC Voltage Stabilization
Plenty of ideas if you do not afraid complexity.
[URL="http://www.ittsb.eu/forum/index.php?topic=876.0"]http://www.ittsb.eu/forum/index.php?topic=876.0[/URL]Re: AC Voltage Stabilization
Plenty of ideas if you do not afraid complexity.
[URL="http://www.ittsb.eu/forum/index.php?topic=876.0"]http://www.ittsb.eu/forum/index.php?topic=876.0[/URL]...
Leave a comment:
-
Re: My first Scope!
In this case some one other than you will benefit from my answer.
Leave a comment:
-
Re: My first Scope!
It is true that when shopping for an Oscilloscope it is hard to predict the ultimate bandwidth that you will even need.
But if you watch the bandwidth specifications of active Oscilloscope probes, you will get a good indication regarding the max usable bandwidth by real applications today.
Some one required an differential probe at 100MHz and the manufactures responded to this new requirement in bandwidth.
Everything is action and reaction.
....Last edited by Kiriakos GR; 07-11-2014, 06:01 AM.
Leave a comment:
-
Re: Cheap ESR meters on fleaBay, what do you think?
I will say to all that is definably a requirement when you are following the correct pattern about conducting capacitors testing.
Capacitors datasheets are the ones which setting the requirements about the technical specifications that an LCR meter should have for Low-ESR measurements & capacitor evaluation according to their manufacturer.
Therefore the final selection of a tool is not according it price or personal likes....
Leave a comment:
No activity results to display
Show More
Leave a comment: