ratdude's main rig mayhem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kc8adu
    Super Moderator
    • Nov 2003
    • 8832
    • U.S.A!

    #41
    Re: ratdude's main rig mayhem

    some of the corsair and ocz stuff is targeted at tweakers and overclockers.you set up the stuff manually. this stuff is not jedec compliant by its nature and its target market.i have seen some where the spd only told you brand and model!

    Comment

    • yyonline
      Badcaps Veteran
      • Jul 2009
      • 692
      • USA

      #42
      Re: ratdude's main rig mayhem

      Since we're talking about laptops, are there any laptops out there that let you tweak memory timings? I certainly haven't seen any, but I usually see pretty mainstream laptops. I occasionally see a custom one, but they're a pain to deal with in their own ways...mostly because it's impossible to find replacement parts for them.

      Comment

      • ratdude747
        Black Sheep
        • Nov 2008
        • 17136
        • USA

        #43
        Re: ratdude's main rig mayhem

        fast foward time!

        the main rig in the thread is now 95% complete (for now)

        I made a trip to fry's on the way back from a college visit... and it bought for it:

        $15 (after rebate) asus dvd rw dl SATA drive. has some nice features but many are windoze only (like e-hammer- takes a cd-r or a dvd-r and makes it permantly unreadable).

        review at:

        http://benchmarkreviews.com/index.ph...1&limitstart=3

        $54- WD blue 7200rpm 320gb drive 16mb... i think it is doing sata 3gb/s...

        $15- sony internal card reader- bezel don't match but i stopped caring. oddly, the back is not closed; PCBONEZ might shoot me down for that... if it was him who was nutz about that...

        $25- 1gb 533 corsair ddr2. identical to my existing chip other than being much newer and a different label design (same model no.). activated dual channel and gave me enough ram for x64.

        no luck on the fan... 90mm pwm fans are common on cpu coolers but are a PITA to find by themselves... i tossid in a spare 3 pin for now... the fan pulses, but in the basement, the furnace blower masks the noise.

        good choices and prices?
        Last edited by ratdude747; 03-24-2011, 03:03 AM.
        sigpic

        (Insert witty quote here)

        Comment

        • kikkoman
          Badcaps Veteran
          • Jul 2007
          • 691

          #44
          Re: ratdude's main rig mayhem

          Originally posted by ratdude747
          good choices and prices?

          way to much for the HDD.
          that is, buying a 320gb disk isn't economical these days. you pay almost double per GB compared to a 1TB drive.
          some might say "but i don't need that kind of space" , but... wrong.
          and - unless you're absolutely sure you've got a winner - a longer warranty is worth it. WD Caviar blue & greens only have 2 years, i'd be surprised if they did much longer than that.
          Caviar Blacks have at least 3 yrs (or 5? can't check right now, their site seems to be down). it's a good investment.
          as to who is the best HDD manufacturer right now... i guess only time will tell.
          if you plan on sticking with that rig for a few years, you might want to buy some more of that RAM soon, it won't get cheaper.

          although, to be honest, your core system is too old for economical investments. look at the DDR3 prices atm... DIRT CHEAP. maybe you're better off buying RAM for your NEXT system right now.
          "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats." - H.L. Mencken

          Comment

          • backtrack
            Member
            • Nov 2010
            • 38

            #45
            Re: ratdude's main rig mayhem

            Excellent choice on choosing WD for your harddisk upgrade.
            I would check that part off on the list for good. I had a WD and it lasted for years and no problems. Time definitely tolled. A 320gb disk would cut defrag times if you use winda that is. Obviously with any linux os you don't have to worry about defraging.

            I think 1gb memory is almost the bare minimum for the x64 instruction set. Barely.. Especially if you are using kde or gnome. 1gb is perfect if you only run a couple processes at a time.
            $25 for a new corsair stick is a nice buy.

            Sucks for the asus optical you just bought. $15 is quite logical. The extra features, I know, most consumer grade crapola they sell in local stores is winda friendly only.
            they call, they telnet, I hangup, I laugh, I get hiccups and digital breakups.

            Comment

            • c_hegge
              Badcaps Legend
              • Sep 2009
              • 5219
              • Australia

              #46
              Re: ratdude's main rig mayhem

              Arctic cooling make 92mm pwm case fans. If you were in Aus, I'd send you the stock fan from my CM TX3 as I replaced it with the pair of AVCs.
              I love putting bad caps and flat batteries in fire and watching them explode!!

              No wonder it doesn't work! You installed the jumper wires backwards

              Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

              Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

              Comment

              • Wizard
                Badcaps Legend
                • Mar 2008
                • 2296

                #47
                Re: ratdude's main rig mayhem

                WD black have longer warranty period and faster. Blue is slight slower and tend to bit of power management.

                I had ASUS burners, they were terrible on mounting time. (blink, blink blink blink wait wait finally see contents of the disc.) Go with LG.

                Cheers, Wizard

                Comment

                • ratdude747
                  Black Sheep
                  • Nov 2008
                  • 17136
                  • USA

                  #48
                  Re: ratdude's main rig mayhem

                  i heard disks bigger than 500gb were prone to early failure.

                  the drive seems to perform well...
                  sigpic

                  (Insert witty quote here)

                  Comment

                  • Phaihn
                    Badcaps Veteran
                    • Jan 2009
                    • 842
                    • Canada

                    #49
                    Re: ratdude's main rig mayhem

                    the Dvd cd combo drive in my old computer was a liteon and it lasted for 7 years it still works but i started having issues with it that when i burned a disk thaat what i burned i couldnt see.
                    My Computer.
                    AMD APU A4-3300 2.5ghz 1mb cache
                    Motherboard GigaByte GA-A75M-S2V
                    Kingston HyperX Blue DDR3 8GB (2x4GB)

                    SB Audigy 2 ZS [B800] Sound Card
                    500GB WD Caviar® Blue™
                    1 Terabyte WD Caviar® Black™
                    2 Terabyte WD Caviar® Black™

                    Comment

                    • Scenic
                      o.O
                      • Sep 2007
                      • 2642
                      • Germany

                      #50
                      Re: ratdude's main rig mayhem

                      Originally posted by ratdude747
                      $54- WD blue 7200rpm 320gb drive 16mb... i think it is doing sata 3gb/s...
                      over here, you could get a 1TB HDD for less than that.
                      buying small HDDs is pretty much the worst thing you can do (price per gigabyte)

                      but now that you have it... could you post the complete model number?
                      like "WD3200AAKS-75L9A0" for example. says it on the sticker pretty much dead center or in HDTune..

                      depending on the stuff behind the dash, you can tell if it's a single-platter drive (faster, quieter, cooler) or if they ripped you off twice by selling you the old model with 2 platters for waaaaay too much..

                      edit:
                      Originally posted by ratdude747
                      i heard disks bigger than 500gb were prone to early failure.
                      my 1st gen WD Caviar Green 1TB in my main PC is well over a year old. no problems whatsoever. According to HDTune (SMART data) it has been powered up for 316 days total
                      Last edited by Scenic; 03-24-2011, 04:28 PM.

                      Comment

                      • ratdude747
                        Black Sheep
                        • Nov 2008
                        • 17136
                        • USA

                        #51
                        Re: ratdude's main rig mayhem

                        here is a readout of a read speed test on the drive:

                        Attached Files
                        sigpic

                        (Insert witty quote here)

                        Comment

                        • Scenic
                          o.O
                          • Sep 2007
                          • 2642
                          • Germany

                          #52
                          Re: ratdude's main rig mayhem

                          lucky. it's one of the newer ones. single 334GB platter, 2 heads. should run cool and be pretty quick..

                          edit: and you still have warranty till feb 17th 2014
                          if you email WD a proof of purchase, the warranty can be updated.
                          (they calculate the warranty from the manufacturing date by default)
                          Last edited by Scenic; 03-25-2011, 10:43 AM.

                          Comment

                          • weirdlookinguy
                            Badcaps Legend
                            • Sep 2007
                            • 1638

                            #53
                            Re: ratdude's main rig mayhem

                            Good choice on the HDD, sounds like it should be pretty reliable and cool running with the single platter. That Sony cardreader was a good choice too, mine has yet to give me any trouble in the last ~1.5 years. Reads SDHC cards no problem.

                            Comment

                            • ratdude747
                              Black Sheep
                              • Nov 2008
                              • 17136
                              • USA

                              #54
                              Re: ratdude's main rig mayhem

                              now that i have an opengl issue fixed, it runs TORCS like a dream. 91 FPS average.

                              doubling the ram and the bandwidth (dual channel) made all the difference.

                              folding@home to come soon.
                              Last edited by ratdude747; 03-25-2011, 02:10 PM.
                              sigpic

                              (Insert witty quote here)

                              Comment

                              • ratdude747
                                Black Sheep
                                • Nov 2008
                                • 17136
                                • USA

                                #55
                                Re: ratdude's main rig mayhem

                                folding is running!
                                sigpic

                                (Insert witty quote here)

                                Comment

                                • Th3_uN1Qu3
                                  Believe in
                                  • Jul 2010
                                  • 6031
                                  • Romania

                                  #56
                                  Re: ratdude's main rig mayhem

                                  I have the same WD drive and have been using it for, um... is it been 4 years already? Think so. Flawless is all i can say. I'll be buying another one for RAID 0.
                                  Originally posted by PeteS in CA
                                  Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
                                  A working TV? How boring!

                                  Comment

                                  • Scenic
                                    o.O
                                    • Sep 2007
                                    • 2642
                                    • Germany

                                    #57
                                    Re: ratdude's main rig mayhem

                                    depending on what's on the label after "WD3200AAKS-" you can sort of determine the platter/head configuration

                                    RAID0 with an old 2 platter and a new singleplatter.. hm.. the 2 platter would slow it down quite a bit. (if it is a 2 platter drive.. which i think it is judging by the age)

                                    http://www.hardware-wiki.org/wiki/We...tal_WD3200AAKS
                                    P = Platter
                                    K = Köpfe = Heads

                                    the ones listed under "Unbekannte Konfigurationen:" are the one's that are known to exist, but the platter/head config is unknown

                                    for other WD HDDs
                                    http://www.hardware-wiki.org/wiki/Western_Digital_HDD

                                    edit: my 3200AAKS-75L9A0 is also a singleplatter one
                                    Last edited by Scenic; 03-28-2011, 02:29 AM.

                                    Comment

                                    • Th3_uN1Qu3
                                      Believe in
                                      • Jul 2010
                                      • 6031
                                      • Romania

                                      #58
                                      Re: ratdude's main rig mayhem

                                      00VYA0 - two platter it seems.
                                      Originally posted by PeteS in CA
                                      Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
                                      A working TV? How boring!

                                      Comment

                                      • kecosero
                                        New Member
                                        • Mar 2011
                                        • 1

                                        #59
                                        Re: ratdude's main rig mayhem

                                        what caps do what on a imac g5 logic board

                                        Comment

                                        • ncovert
                                          Badcaps Veteran
                                          • Feb 2011
                                          • 291
                                          • USA

                                          #60
                                          Re: ratdude's main rig mayhem

                                          Originally posted by c_hegge
                                          I say avoid Samsung and Hitachi Deathstars. WD and Seagate are the only brands I trust.
                                          I only like Hitachi (not IBM) and Western Digital.
                                          Maxtor bought out Seagate, so they are cheap crap now!

                                          Comment

                                          Related Topics

                                          Collapse

                                          • jb_Bak
                                            Sony xbr-65x900c main board issues?
                                            by jb_Bak
                                            Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                                            Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                                            Power Board Connector that goes to Main board
                                            CN6401
                                            Pin 01 NC
                                            Pin 02 NC
                                            Pin 03 "BL_ON": 0V
                                            Pin 04 "N/C"
                                            Pin 05 "STBY 3.3V": 3.5V
                                            Pin 06 "GND": N/C
                                            Pin 07 "AC_OFF"...
                                            09-27-2021, 04:52 PM
                                          • advant
                                            Driving a Sharp TCON/panel with a universal main board
                                            by advant
                                            This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                                            I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                                            02-03-2020, 12:25 AM
                                          • JDC
                                            (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                                            by JDC
                                            ONN 100012588
                                            Issue: No Power, Then Rebooting After Main Board Change

                                            Short answer: replace main board and power board
                                            Technical answer: replace main board and Q306 & Q307 on power board.

                                            Long answer:

                                            TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                                            07-15-2022, 07:39 AM
                                          • bffargo
                                            2014 LG 60" Plasma shut down just clicking unless I disconnect 17V line to main CPU
                                            by bffargo
                                            LG 60PB66550 NOV 2014
                                            PSU: EAY63168603
                                            PCB: EAX65359531 2013.11.01 Rev:1.0

                                            Main board: EAX65399305(1.0) 13.11.27 PU42A/PA42A/PD42A

                                            Symptom:
                                            While watching, just went black and started clicking relay every few seconds.

                                            Initial diagnosis:
                                            Removing JUST the main CPU/Input PCB from circuit stops the clicking. No problems with any other boards/drivers. (Removing all other boards and only putting Main back in is all it takes to start clicking again)

                                            Deeper diagnosis:
                                            Pulling pins #1/#2 (Blue/Grey) from the connector housing...
                                            09-09-2022, 07:34 PM
                                          • Lee M.
                                            Samsung UN75RU8000FXZA bad main board?
                                            by Lee M.
                                            When plugged in it will click and cycle the BL on and off, no pic and does not respond to remote. When I disconnect the cable from the PS board to the main board and then plug it in the BL will come on and stay on. There are only two boards in this set, the LVDS cables from the panel driver boards connect directly to the main board. Since the BL comes on and stays on I'm thinking the PS board is ok and the problem is on the main board. Should I order another main board or do I need to do more testing? thanks, Lee
                                            11-08-2023, 07:46 PM
                                          • Loading...
                                          • No more items.
                                          Working...