Re: The GOOD Capacitors Thread!!
I could use a few of these
I could use a few of these
-
-
Re: The GOOD Capacitors Thread!!
Good capacitors "Ketucon." PSU board from satellite receiver made in 2007, in this board is 12 capacitors Ketucon. Testing this device - all in excellent condition - nominal capacity and ECP from 0.01 to 0.4 ohms.Attached Filesif you find these attachements useful please consider making a small donation to the site
Last edited by kasfamily; 10-26-2014, 03:41 PM.Comment
-
-
Re: The GOOD Capacitors Thread!!
Hi guys,
I am planning to change the capacitors on my 600W computer power supply. The input filtering capacitor as well as the output capacitors.
I would like to know which good capacitor brand is suitable for this kind of applications.
I don't know if you guys need the brand, cap size and voltage rate of the capcitors that are in the power supply. If you guys need that info, please let me know.
In the electronic store next to me they have those brands:
Cornell Dubilier, Elna, EPCOS, Kemet, Lelon, Nichicon, Panasonic, Parallax, TE Connectivity, United Chemi-Con and Vishay.
From what I have seen in high-end power supplies, they have some Nippon Chemi-Con capacitors and from what I can tell (from the research I've done) the United Chemi-Con is a subsid of Nippon in North America. However I don't know if they have the same quality.
Thank you in advance.
Regards.Comment
-
Re: The GOOD Capacitors Thread!!
I judge a cap manufacturer on the quality of their lowest tier caps. The "Big 3" never let me down. The only caps I buy
Nichicon
Elna
PanasonicComment
-
Re: The GOOD Capacitors Thread!!
Rubycon?Comment
-
Re: The GOOD Capacitors Thread!!
Are nichicon PV supposed to look like this? It looks like a bung wasn't installed. Got them from Digi-KeyAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: The GOOD Capacitors Thread!!
^ You mean not a "typical" Nichicon bung.
Yeah, most Nichicon I've seen usually have an "extended" bung, even if it is flat. But I don't know, maybe these are newer and built more cheaply? Yours looks exactly like the pictures on Digikey too. Hopefully someone who has tried these out can chime in and let us know.Comment
-
Re: The GOOD Capacitors Thread!!
Try scratching it. Maybe it's like the white power you get on erasers?Muh-soggy-kneeComment
-
Re: The GOOD Capacitors Thread!!
The SV series caps (submini) are the same way.
I think the PVs are the same, but it's been a while since I've used those."pokemon go... to hell!"
EOL it...
Originally posted by shango066Originally posted by smashstuff30guilty,guilty,guilty,guilty!
guilty of being cheap-made!
Comment
-
Re: The GOOD Capacitors Thread!!
here are some good caps. Sprague!
they are bigger in real life!Attached Filesif you find these attachements useful please consider making a small donation to the site
Last edited by goontron; 02-21-2015, 10:22 PM.Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
-
Re: The GOOD Capacitors Thread!!
probably from an industrial rack supply judging by the datecodes.Comment
-
Re: The GOOD Capacitors Thread!!
No powder on them. I went ahead and just installed it. The specs were very close to the datasheetComment
-
Re: The GOOD Capacitors Thread!!
Hello!
I need a good capacitor for a old vintage Tandberg Huldra 10 in the DC Output. There are a pair of MICRO 3300uF 85V old brand from 1973 and if any know what type I should replace them with. They are 35mm wide and 60 mm heigh. Snap in capacitor.Comment
-
Re: The GOOD Capacitors Thread!!
snap in with how many pins?
if it's 2, are they 10mm spaced?Comment
-
Re: The GOOD Capacitors Thread!!
Hay brother, i want some advice about caps
How about for caps 330uF from brand :
1. STTECH
2. AVX
Good or no ?
Many thanksComment
-
Re: The GOOD Capacitors Thread!!
I think I have identified 2 bad capacitors on my Dell XPS 15 L501x motherboard. I believe they are 10 uF ceramic, from discussions. But I cannot find any other specifics, not even from Dell. I cannot find ones that are small enough, about 1 X 3 mm, on site listing capacitors. Anyone know where I can get these to try out?
ThanksLast edited by parmax711; 07-14-2015, 03:18 PM.Comment
-
Re: The GOOD Capacitors Thread!!
This capacitor is a bit special, this is a single-phase motor of a bauknecht dryer. It seems to be nothing out of the ordinary, but has nearly 30 years and continues to run and starts the engine to the first.
Gaming pc:
nVidia RTX 3080 TI, Corsair RM750I.
Workshop PC:
Intel core i5 8400, Intel SSD 256GB, nvidia gt1030, asus b365-a.
Server:
Comment
-
Re: The GOOD Capacitors Thread!!
Tried to post a help question on cap threads says not allowed! I have a old 42"LG problem with HTMI Port1 using sky box Some unknown reason port 1 won't work yet Htmi port 2 does then plays up after an hour, After looking over for the bad joints on the board couldn't find any issue how ever looking over on main power supply board There are 2 caps that look suspect cap 10v 2200 uf and cap 25v 470uf right by a plug that feed main board tuning right by htmi ports .. Would the culprit be the caps be the problem on power supply board ? I do have a image of the board but not able to upload here to show.. Thanks for any info
Comment
-
Re: The GOOD Capacitors Thread!!
Tried to post a help question on cap threads says not allowed! I have a old 42"LG problem with HTMI Port1 using sky box Some unknown reason port 1 won't work yet Htmi port 2 does then plays up after an hour, After looking over for the bad joints on the board couldn't find any issue how ever looking over on main power supply board There are 2 caps that look suspect cap 10v 2200 uf and cap 25v 470uf right by a plug that feed main board tuning right by htmi ports .. Would the culprit be the caps be the problem on power supply board ? I do have a image of the board but not able to upload here to show.. Thanks for any info
Comment
-
hey all, iv got my favourite battery charger here which iv had for many years probably 15 years now or maybe even more. it still works good but thought id open it up to clean the dust out of it, lots of dust inside but now its clean and noticed 4 capacitors inside it and wondered if i should replace them.
it has inside:
2 x 47uf 16v caps 105c branded as Su'scon (lol sounds sus to me)
2 x 470uf 16v LZ105c branded as G.Luxon
not heard of these brands are they any good?
iv attached photos of the charger and the board inside for an idea on the type of... -
Are there good brands for 'run capacitors' or 'start capacitors' that are used on electric motors or heat pump compressors? ... r are the good capacitor brands for electronics (power supplies, laptops, motherboards, etc.) also the good brands for run capacitors?
Yeah I know this might be a novice question, but I just wanted to be sure. I did do a search on the forum but did not see this question asked before.
Thanks -
Hi, I have some 32 bits computer motherboards that need repair, as they fail to
power on.
Here are some examples :
(N.B. "capacitors" indicated here are electrolytic capacitors located in the onboard
switching supply area).
(N.B. #2 : I could not find a 3300 microF aluminum-polymer with a higher voltage
than 6.3 V.)
1 - Motherboard #1 : this is an Asrock K7VT2 (socket A) that still works well. To put it on test
I replaced capacitors with aluminum-polymer.
3300 microF/6.3 V. x 4 replaced by 3300 microF/6.3 V. (KYOCERA... -
PS4 1215A HDMI DIODE READINGS GOOD EVERYTHING GOOD BUT NO PIC? everything is good! what else can it be? if hdmi diode values are good that means encoder and filters are good right? idk what else it can be guys...01-05-2023, 12:32 AM -
I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow
This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board
After all of...
Comment