Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
ok finally got the New compatible IC and flashed the bin you guys gave me.. Same exact issue as the old ic.. Will not boot from any usb..gets stuck on hp logo or reboots.. if it was bad ram itwont even go to bios right? Can it be bad bios bin I got ? or Another component on the board? Tried diff ram and ssd and disconnected everything and still same issue ?
Leave a comment:
-
ok finally got the New compatible IC and flashed the bin you guys gave me.. Same exact issue as the old ic.. Will not boot from any usb..gets stuck on hp logo or reboots.. if it was bad ram itwont even go to bios right? Can it be bad bios bin I got ? or Another component on the board? Tried diff ram and ssd and disconnected everything and still same issue ?...
Leave a comment:
-
is any winbond ic x25x128xxxx compatible and Wheres the best place to buy them? thanks
is this chip compatible ? [B]Macronix MXIC: MX25L12873F M2I-10G / 25L12873FM2I-10G / MX25L12873F / 25L12873F 16MB: SOP-8 Pin)[/B]
it looks the same and its 128mb ?
YES 128mb i ordered 2 and will see...is any winbond ic x25x128xxxx compatible and Wheres the best place to buy them? thanks
is this chip compatible ? [B]Macronix MXIC: MX25L12873F M2I-10G / 25L12873FM2I-10G / MX25L12873F / 25L12873F 16MB: SOP-8 Pin)[/B]
it looks the same...
Leave a comment:
-
I USED ch341a software this time and gives an error when verifying ic i think same area " 00F69700" so both softwares give errors when verifying ic
now when i verify it just says this right away when i press verify...Last edited by irepair559; 01-10-2024, 04:39 PM.
Leave a comment:
-
ok wrote that bin but gave me this error..
Current programmer: CH341
10:09:22
Verify memory...
Success
Execution time: 00:02:33.171
Current programmer: CH341
10:11:55
Programming memory(verifying)...
Verification error on address: 00F69700
Execution time: 00:05:26.351
did another verify
Verify memory...
Verification error on address: 008CF800
Execution time: 00:01:23.666
Leave a comment:
-
its actually 1mb but coompressed to 300kb.. when i choose 16mbyte option it saved it as 16mb, What option should i have it on in ch341? Its a winbond 25R128JWSQ 2153 .. HP ENVY X360 15-EY0013DX Thanks...Last edited by irepair559; 01-08-2024, 07:51 PM.
Leave a comment:
No activity results to display
Show More
Leave a comment: