Does anyone have a schematic for the signal board that is attached to the panel? This is the board that is connected to the panel and goes to the T-Conn board via a flat ribbon cable. I have something shorted on the Left board as it blows the fuse on the T-Conn when I hook up the ribbon to the left signal board. The right side of the panel has a perfect picture with its ribbon cable hooked up.I need a schematic.
-
-
Re: Sony KDL-52V4100
Most failures on that tab bonding board are due to shorted cap, so start checking the resistance of the caps.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: Sony KDL-52V4100
T-con FS_HBC2LV2.4 ?Comment
Comment