LG 47SL80 Horizontal "Dashes"......

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michale32086
    New Member
    • Nov 2011
    • 1453
    • USA

    #21
    Re: LG 47SL80 Horizontal "Dashes"......

    Nope.. Unfortunately, no scope.. Have a multimeter though.. And I ain't afraid to use it!!

    Comment

    • budwich
      Badcaps Legend
      • Jul 2015
      • 3097
      • Canada

      #22
      Re: LG 47SL80 Horizontal "Dashes"......

      play with the folds in the LVDS and see if that changes anything with respect to the lines. what does the back side of the tcon board look like around the screw mount holes?
      Last edited by budwich; 06-21-2018, 11:38 AM.

      Comment

      • Michale32086
        New Member
        • Nov 2011
        • 1453
        • USA

        #23
        Re: LG 47SL80 Horizontal "Dashes"......

        Got side tracked on this one.. Hope to get back on it soon...

        Comment

        Related Topics

        Collapse

        • jason123
          Hisense 65R6E3 double-image / horizontal strips - TCON?
          by jason123
          Hello all. 3 years back, with your help, I replaced the LEDs on this TV. It's been working great. Yesterday, I turned it on (garage TV), and it has blurred horiz / vert lines as you see in photos. Definitely no physical hit or damage. Top 1/6th of the screen is perfect. Could it be main / TCON board? No tabs to cut on this model. Thank you...
          07-19-2025, 08:07 AM
        • x_orange90_x
          TCL 50S535 bad tcon or panel issue?
          by x_orange90_x
          Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
          03-29-2025, 11:02 PM
        • Hakuu
          LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
          by Hakuu
          Hi There,

          This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

          After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

          More Details

          TV Model - LG OLED77G1PUA

          Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
          07-12-2023, 02:37 PM
        • netgearnetgear
          TCL 43S423 TCON OR PANEL FAULTY???
          by netgearnetgear
          Good day, I have a TCL TV: Model 43s423. After turning ON the TV, the ROKU TV logo appears with fine lines over the whole screen, then after a while there are vertical bands in the middle of the screen top to bottom and the TV tries to update its firmware but I do not have the remote to connect it to my new network connection. Also the Power ON light blinks 2 times in quick succession. When I remove the ribbon on the right of the tcon board the left side of the screen shows but with fine lines. If I remove the left side ribbon and connect the right side ribbon the whole screen is blank with...
          08-20-2025, 06:04 PM
        • kca
          LG 82UN8570AUD ~ TCON or PANEL?
          by kca
          Hello all ~

          Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

          When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

          I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
          08-31-2025, 06:38 AM
        • Loading...
        • No more items.
        Working...