A free TV. It comes back on with a normal picture after being turned off, but becomes more and more solarized with time on.
I shot cold spray over most of the boards' parts with no effect.
I haven't measured any voltages anywhere yet. Three of the four big caps on the power board might be a little bulged on top.
The menu has normal colors.
I re-seated the cable between the main board and the t-con board - ng.
Any advise on how to proceed?
I shot cold spray over most of the boards' parts with no effect.
I haven't measured any voltages anywhere yet. Three of the four big caps on the power board might be a little bulged on top.
The menu has normal colors.
I re-seated the cable between the main board and the t-con board - ng.
Any advise on how to proceed?
Comment