I have a chance to pick up this TV.
Attached Files
-
-
Re: KDL-46v5100 T-CON or Panel?
Take a look at the screen when you press menu button. See how it looks. Your 1st pic looks like there are horizontal lines all over, maybe just the pic. But I am thinking bad panel.
If menu looks good, I would say bad main, maybe tcon. Stay tuned.....better answers to come. -
Re: Sony KDL-46v5100 T-CON or Panel?
Yes All these are famous for Bad panel _
i just trashed one KDL46S4100
with good pic but one strip right in the middle;
FX - Chassis
KDL46S4100- LTY460HB10-001
LTY[Z]460HB11-A02
EX2R - Chassis
KDL46S504- LTY[Z]460HB11-A02
EX2R - Chassis
KDL46S5100-- LTY[Z]460HB11-A02
MA2F - Chassis
KDL46SL140- LTZ460HB10-001
LTY[Z]460HB11-A02
KDL46V4100- LTZ460HB10-001Last edited by ivtec; 10-26-2016, 06:09 PM.Comment
-
Re: KDL-46v5100 T-CON or Panel?
Thank you for the reply's. Is this a problem with just these 46" Samsung panels as the 40" don't seem to suffer the fate?
ChrisComment
-
Re: KDL-46v5100 T-CON or Panel?
Sorry to be resurrecting an old thread... but I have the same model TV with the same problem as the second picture with the lady and all of the different colored vertical lines.
Was it determined that the panel was bad? or Was a t-con board possibly tried with a positive resolution to this?
ThanksComment
-
Re: KDL-46v5100 T-CON or Panel?
The lines as well seem to come and go. With the picture looking fine at times. Here are a few sample picsAttached FilesComment
-
-
Re: KDL-46v5100 T-CON or Panel?
I have a Sony KDL-32" same problem and it was the T-Con Board which was goosed..Comment
-
Re: KDL-46v5100 T-CON or Panel?
Thanks Thrashbast. I'll track one down and hope I get the same results as you.Comment
-
Re: KDL-46v5100 T-CON or Panel?
Any luck on that tcon fix?Comment
-
Re: KDL-46v5100 T-CON or Panel?
Tcon service there for 30 bucks. https://www.ebay.com/itm/SONY-KDL-46...-/153149898784Comment
-
Hello all ~
Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.
When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.
I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped... -
Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side... -
Good day, I have a TCL TV: Model 43s423. After turning ON the TV, the ROKU TV logo appears with fine lines over the whole screen, then after a while there are vertical bands in the middle of the screen top to bottom and the TV tries to update its firmware but I do not have the remote to connect it to my new network connection. Also the Power ON light blinks 2 times in quick succession. When I remove the ribbon on the right of the tcon board the left side of the screen shows but with fine lines. If I remove the left side ribbon and connect the right side ribbon the whole screen is blank with... -
This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.
I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match... -
Hi,
i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
Backlight seems to work, Sound (Setup menu after reset) works.
If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
With my small knowledge i would think at least the cables are good.
Can this happen because of a bad tcon board?
Or is it always a bad/shorted...
Comment