LG 55LX6500 Vertical bars

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Twithers
    Senior Member
    • May 2013
    • 69
    • U. S.
    #1

    LG 55LX6500 Vertical bars

    Trying to resurrection an LG 55LX6500. Got it to power up, but I've got a vertical bar issue.

    I pulled and cleaned the 2 ribbon cables, with no change.

    I made some foam rubber spacers and put them between the frame support and both sides of the ribbon cables between the screen itself and the long boards that distribute the video signal (the actual name escapes me) along the panel. Put everything back together and got no change.

    Does that mean it's a bad tab bond on the display panel and ultimately a very expensive paper weight?

    This model retails for $3K, so if there's a way to fix it, that would be great.

    Thanks for the help.
    Attached Files
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: LG 55LX6500 Vertical bars

      Panel failure.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA
          #3
          Re: LG 55LX6500 Vertical bars

          Is the tab bonding on the top edge or on the bottom edge of the TV?
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • Twithers
              Senior Member
              • May 2013
              • 69
              • U. S.
              #4
              Re: LG 55LX6500 Vertical bars

              Along the bottom.

                Comment

                • kc8adu
                  Super Moderator
                  • Nov 2003
                  • 8832
                  • U.S.A!
                  #5
                  Re: LG 55LX6500 Vertical bars

                  glass cleaner damage.
                  see this often on bottom fed panels.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • x_orange90_x
                      Samsung UN46C8000XFXZA vertical bars/horizontal lines
                      by x_orange90_x
                      I posted about this previously but didn't get any response, and I have some troubleshooted a bit so I have more info.

                      The screen is full of horizontal "gaps" or lines that distort the picture badly, and after about 10 seconds of powering it on the screen starts to fill with red vertical bars that take on the horizontal pattern. After the screen filled with the red bars, they instantly vanished and then slowly started to reappear. I initially thought it was tab bonding failure, but after getting down to them and pressing each one I find zero change in the picture. I went...
                      09-04-2023, 12:09 PM
                    • x_orange90_x
                      TCL 50S535 bad tcon or panel issue?
                      by x_orange90_x
                      Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
                      03-29-2025, 11:02 PM
                    • Daren87
                      Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed🙏
                      by Daren87
                      Hello everyone,

                      I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
                      08-13-2023, 03:25 PM
                    • Tr0ll
                      T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                      by Tr0ll
                      Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                      The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                      Original T-con:
                      Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                      First replacement T-con:

                      I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                      10-07-2023, 07:48 PM
                    • ninja_zx11
                      Sharp LC-70LE650U vertical black and red bars
                      by ninja_zx11
                      Hi all,

                      70" LED TV is Sharp LC-70LE650U.

                      Initial problem was horizontal lines and slow motion lurrs on the bottom left of the screen. So I removed both the left and right ribbon cables from the T-con board and tried to clean it with alcohol and when I put it back, this issue appeared. I tried carefully reinserting the ribbon bon cables but same thing. I checked the traces of the ribbon cables with magnifying glass and everything looks good. I cleaned the small jumper ribbon cable on the left side of the screen which cured the horizontal line and slow motion blurs...
                      07-07-2023, 11:27 PM
                    • Loading...
                    • No more items.
                    Working...