Bn41-00813 issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rickig
    Senior Member
    • Mar 2015
    • 112
    • England

    #1

    Bn41-00813 issues

    Hi folks
    I've come across this fault several times before but never found a resolve, I know it's been spoke of on here before just wondered if a solution has been found.
    The fault is that the set will cycle , it will come on and work fine for 15seconds or so then power off and straight back on for another 15 secs and so on.
    I've replaced EEPROMs which hadn't cured it.
    Thanks
  • Nick's Tvs
    Badcaps Veteran
    • Jan 2014
    • 621
    • USA

    #2
    Re: Bn41-00813 issues

    Post the part number of the board BN94-
    also if you could post a picture of the board that would also help us.
    Try re-flowing the main IC

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #3
      Re: Bn41-00813 issues

      Did you already try heating the board with hair dryer, especially under that big metal shield?
      B?, D?, E?
      Samsung BN94-01178B (BN41-00813B) Main Board.

      Samsung BN94-01121S (BN41-00813D) Main Board.

      Samsung BN94-01472M (BN41-00813E) Main Board.

      Picture provided by shopjimmy.
      Attached Files
      Last edited by budm; 03-09-2016, 12:04 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • CapLeaker
        Leaking Member
        • Dec 2014
        • 7967
        • Canada

        #4
        Re: Bn41-00813 issues

        x2 what budm said.

        Comment

        Related Topics

        Collapse

        • popzeggey
          Dell Latitude E7450 Power issues and fault
          by popzeggey
          I have a dell e7450 that shuts down abruptly when on and tries to restart. When the laptop attempts to restart, the hdd and wifi led is solid but power/battery led blinking hdd. Fault Description The memory modules are detected but encountered an error.

          I have tried all basic troubleshooting steps like removing the battery and pressing power button for 30secs but issue persists. I have tried different fully working rams but issue persists. Any help would be much appreciated
          01-16-2025, 04:31 PM
        • fluzocapacitor
          Touchscreen Issues on Samsung Galaxy Tab A: Replacement Problems or Hardware Fault?
          by fluzocapacitor
          Hello,

          The touchscreen of my tablet started malfunctioning in a strip about one centimeter wide that stretched across the screen, approximately 5 centimeters from the top edge of the tablet.

          I bought another touchscreen and replaced it. The issue with the strip disappeared, but on this new screen, the bottom area didn't work, up to about 6 centimeters from the bottom edge of the tablet. The malfunction was quite strange because it only occurred when the first touch was made in that area. In other words, if you touched an area outside the faulty zone and then dragged into...
          01-01-2025, 03:56 AM
        • Rictech
          Panasonic SA-MAX770PU SMPSU board fault....
          by Rictech
          Hello everyone. 😀

          As per thread title, this unit has a serious SMPSU fault. It blows F1001, which is a 10A M205 in the phase from the mains input.
          Very first thing I tried, was simply replacing the fuse, but the replacement ceramic fuse blew immediately.

          Looking at the schematic for this PSU, I then removed what I thought was the next likely candidate: D1001 - the HV main bridge rectifier.
          This isolated the fault(no longer blows the main fuse), but does not point me to the actual fault.
          There are no devices that have exploded or otherwise show signs...
          08-26-2024, 01:05 AM
        • sam_sam_sam
          ESR meter came to the rescue again today with a PLC I/O card fault
          by sam_sam_sam
          I have been having a fun time at work with two pieces of equipment that had shorted components or shorted component cables to machine frame
          I would check what my multi meter was telling me about how many ohms I getting with the multi meter was telling versus the ESR was telling me about weather or not it really was a short to machine ground or not

          One note at first we thought that it might be a bad I/O card or a malfunction PLC including me as well but I thought I would try and see if removing the I/O cables would make a difference or not and this time it did make a difference...
          12-18-2023, 08:17 PM
        • cazi1001
          Strange fault on Lenovo ThinkPad E14 Gen. 2
          by cazi1001
          Hello,
          I have a strange fault with a Lenovo ThinkPad E14 G2 (Board No. NM-D011 Rev. 1.0).

          The first Problem, which I fixed already, was a dead TPS65944AD (USB Type-C) controller. After I fixed this fault, all functions working fine and the notebook run very well with the charger and battery.
          On the next day, I tied to start the notebook with the battery, but nothing happened. I started with the charger and on windows, I saw, that the battery was empty. And this was nearly impossible, because the battery was charged. I disconnected the battery and found out, that the board...
          03-24-2024, 04:16 AM
        • Loading...
        • No more items.
        Working...