skybox f3

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gobby009
    Senior Member
    • Oct 2014
    • 63
    • uk

    #1

    skybox f3

    hi guys not sure if this is the correct forum for this post if its not maybe someone could move it.got an skybox f3 no life.the cable that connexts to the mainboard from the power supplyone end is soldered to the power supply and the other end clips into the motherboard.with the power on i put the black probe of my multimeter on the top ground and go down the voltages with the red probe heres what i get.

    gnd=0
    24v=35v
    12=11.5v
    gnd=0
    5v=0
    5v=0


    just wondering if it is a badcap issue.any help would be appreciated.
    Attached Files
  • Alastair E
    Chief Womble
    • Mar 2013
    • 1963
    • U.K.

    #2
    Re: skybox f3

    Possibly IC1, if its a 7805....

    PSU is running--so its confined to 5V rail, or maybe D9...
    Last edited by Alastair E; 01-31-2016, 01:59 PM.
    TELEFIX

    How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
    http://www.irf.com/technical-info/appnotes/an-1088.pdf
    PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

    Comment

    • CapLeaker
      Leaking Member
      • Dec 2014
      • 7971
      • Canada

      #3
      Re: skybox f3

      5V rail is dead. So I think we need better pictures from top and bottom of the psu.

      Comment

      • stj
        Great Sage 齊天大聖
        • Dec 2009
        • 30915
        • Albion

        #4
        Re: skybox f3

        that shit looks worse than a spiderbox HD series!
        check for cracked solder joints on the psu.

        Comment

        • goontron
          5000!
          • Dec 2011
          • 4108
          • US

          #5
          Re: skybox f3

          Originally posted by stj
          that shit looks worse than a spiderbox HD series!
          check for cracked solder joints on the psu.
          The f5 is a lot better!
          Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

          "Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

          Excuse me while i do something dangerous


          You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

          Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore

          Follow the white rabbit.

          Comment

          • PhaseCoder
            Senior Member
            • Nov 2013
            • 62
            • Uk

            #6
            Re: skybox f3

            Join this group here, he is well maintained in selling lines etc and tgere is alot of people who can help there as they play with these all day

            https://www.facebook.com/groups/freeskysatelliteuk/

            Comment

            • PhaseCoder
              Senior Member
              • Nov 2013
              • 62
              • Uk

              #7
              Re: skybox f3

              but if you are looking for another box to get a good line, i swear by these never let me down

              http://www.ebay.co.uk/itm/GENUINE-OP...-/141676955868

              Comment

              • budm
                Badcaps Legend
                • Feb 2010
                • 40746
                • USA

                #8
                Re: skybox f3

                IC1 is probably TL431 series ref diode which drives the OPTP OPT for Voltage regulation..
                We do need good clear pictures of the bottom side of the board.
                Never stop learning
                Basic LCD TV and Monitor troubleshooting guides.
                http://www.badcaps.net/forum/showthr...956#post305956

                Voltage Regulator (LDO) testing:
                http://www.badcaps.net/forum/showthr...999#post300999

                Inverter testing using old CFL:
                http://www.badcaps.net/forum/showthr...er+testing+cfl

                Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                http://s807.photobucket.com/user/budm/library/

                TV Factory reset codes listing:
                http://www.badcaps.net/forum/showthread.php?t=24809

                Comment

                • gobby009
                  Senior Member
                  • Oct 2014
                  • 63
                  • uk

                  #9
                  Re: skybox f3

                  here are some pictures of the bottom.
                  Attached Files

                  Comment

                  • budm
                    Badcaps Legend
                    • Feb 2010
                    • 40746
                    • USA

                    #10
                    Re: skybox f3

                    You need to check the Diode (I cannot read the designator on the board) for the 5V supply and check all the connections from the Diode all the way to the 5V terminal.
                    The regulation is done by taking the 5V output for feedback to maintain output Voltage.
                    Nothing complicate on the outputs side just simple Half-wave rectifying and Pi filters.
                    BTW, what is the resistance reading between 5V pin and the GND pin?
                    Attached Files
                    Last edited by budm; 02-05-2016, 10:31 AM.
                    Never stop learning
                    Basic LCD TV and Monitor troubleshooting guides.
                    http://www.badcaps.net/forum/showthr...956#post305956

                    Voltage Regulator (LDO) testing:
                    http://www.badcaps.net/forum/showthr...999#post300999

                    Inverter testing using old CFL:
                    http://www.badcaps.net/forum/showthr...er+testing+cfl

                    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                    http://s807.photobucket.com/user/budm/library/

                    TV Factory reset codes listing:
                    http://www.badcaps.net/forum/showthread.php?t=24809

                    Comment

                    Related Topics

                    Collapse

                    • perfm2
                      Wson8 spring pin probe WORKS
                      by perfm2
                      I couldn't find anywhere on the internet where someone had discussed actually using one of these newer wson8 probes for flashing your Wson8 BIOS chip without removing it from the MB.
                      I recently ordered one to give it a shot and it actually worked quite well.

                      The tricky part is obviously keeping the probe pins in place on the exposed Wson8 pads of the MB while reading/writing.
                      I used a larger binder clip attached to the top of the probe to create a large flat surface, then added about 1lb of weight to it.
                      This aided greatly in allowing the probe to stay in place...
                      03-30-2023, 11:19 AM
                    • Jane
                      How do you test MOSFET in laptops ?
                      by Jane
                      I tried to use this method:

                      Testing an N-channel MOSFET:

                      Step 1: Discharge the Gate (turn off the MOSFET)
                      Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
                      Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

                      Step 2: Charge the Gate (turn on the MOSFET)
                      Now, place the red probe on the Gate (G) and the black probe on the
                      ...
                      09-27-2024, 03:31 AM
                    • Askic
                      Probe point corrosion -Macbook repair
                      by Askic
                      Hello guys,

                      I'm learning about logic board (motherboards) repairs. I don't do repairs professionally, but I manage from time to time to repair something for my family and friends.

                      What caught my attention is this visual inspection guide written by Louis Rossmann. It seems that corosion on probe points on the motherboard can "kill" Macbook. https://wiki2.rossmanngroup.com/inde...ual_inspection
                      I wonder how corrosion cause this. If there is a track that has a probe point made on it and corrosion is build up on that place, does this means...
                      01-31-2021, 10:46 AM
                    • JimBanville
                      MOSFET mystery
                      by JimBanville
                      N channel mosfets testing as P type?

                      Working on a smps.
                      Using Fluke 115. Red probe in red socket. Black probe in black/common socket. Meter set to diode mode.
                      Removed a pair of mosfets marked 1L02AB FDP
                      26N40 from the circuit.
                      The pair of Mosfets are still screwed to the single heatsink. Mosfet printing facing me.
                      I did the test where I short the left and center pins. I put black probe on right pin and red probe on center pin. I get OL. While keeping black probe on right pin, I put red probe on left pin and get OL. After a few seconds I move red...
                      09-14-2023, 04:22 PM
                    • irnard
                      Micro SMD probe tip for Rigol oscilloscope ?
                      by irnard
                      Any advice where can I find micro SMD probe tip for Rigol oscilloscope ? Can't find anything online and factory one is just too fat to fit in some tight spaces on logic board. Thx
                      02-09-2023, 09:22 AM
                    • Loading...
                    • No more items.
                    Working...