Philips 42PFL7603D/10 image problems

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • jasonr2000
    Advance Tech
    • Nov 2013
    • 209
    • UK
    #21
    Re: Philips 42PFL7603D/10 image problems

    Hi guys so I contacted emos TV

    And they are trying to say its a tab bond issue

    Now I've tried pressing on the tab bonds gently and the screen don't change in anyway


    Does anyone think this is a tcon issue PIC attached
    Attached Files
    Samsung UE46D6530
    Samsung BD-F7500
    Samsung HT-ES6200

      Comment

      • jasonr2000
        Advance Tech
        • Nov 2013
        • 209
        • UK
        #22
        Re: Philips 42PFL7603D/10 image problems

        Another update guys

        As I've not got a voltmeter at the moment I disconnected half the tcon board from the screen by removing the left side ribbon cable and the right side of the image is good and the left goes black
        When I do the same with the right side I get a negative image on the left and a black half on the right

        Is this the as15-f chip ?

        As emos want me to return the replacement tcon for troubleshooting
        Samsung UE46D6530
        Samsung BD-F7500
        Samsung HT-ES6200

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • alro7779
            Philips 32PFL4901/F8 BA5DFGG0201 1 Backlight is present but no image
            by alro7779
            Hello there!
            Have this Philips with no image at all. When I plug it to the outlet, it turns on without pressing the power button, and after a moment, it turns off, then starts again. I checked the 12v and 3.3v voltages on the main board connector that goes to the T-con, but it only has the former (12v). Any clues, guys?...
            08-07-2025, 11:53 AM
          • tuner2000i
            Philips 65PUS8518/12 distorted image after main board replacement
            by tuner2000i
            hello everyone,

            I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.

            The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.

            ...
            07-15-2025, 01:15 PM
          • malekservis
            Philips 58PUS8536/12 Backlight ok, no image
            by malekservis
            Hello,
            the TV turns on fine, seems to be working, but shows no image outside of a thick white vertical line as it turns on that also disappears almost instantly, and then it's just backlight. I've tried unplugging either side, but still can't get an image. I suspect it's a panel issue, but thought i'd ask some smarter people to confirm. I haven't found any weird readings, but then again i'm just randomly poking around with a multimeter.

            Any information would be appreciated....
            08-07-2024, 07:48 AM
          • jason123
            Hisense 65R6E3 double-image / horizontal strips - TCON?
            by jason123
            Hello all. 3 years back, with your help, I replaced the LEDs on this TV. It's been working great. Yesterday, I turned it on (garage TV), and it has blurred horiz / vert lines as you see in photos. Definitely no physical hit or damage. Top 1/6th of the screen is perfect. Could it be main / TCON board? No tabs to cut on this model. Thank you...
            07-19-2025, 08:07 AM
          • Document Archive
            HP Elite Slice G2 + Image Load & Asset Tag Elite Slice i5-7500T Specification for Upgrade or Repair
            by Document Archive
            This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
            09-12-2024, 02:20 PM
          • Loading...
          • No more items.
          Working...