Hello everyone. I have had this 42 sceptre for quite a while and never have had a problem. About a month ago sometimes a certain color would look slightly inverted or almost neon and then stop. Just the other day I turned it on and now it's non stop crazy colors.
I have tried finding a way into the service menu on this set without luck.
Based on web research, I have found other people with similar problems and they ended up replacing the main or tcon board with good results.
I unscrewed the back and reseated all the connectors on the boards without any luck, including the tcon ribbons. I also wiggled connectors with the set on and noticed no change in the picture.
I don't want to throw boards at it and need help determining where to go next.
The main board is numbered DDM42_V7
The tcon board is numbered T420XW01 V4
Thank you for your help!
Josh
I have tried finding a way into the service menu on this set without luck.
Based on web research, I have found other people with similar problems and they ended up replacing the main or tcon board with good results.
I unscrewed the back and reseated all the connectors on the boards without any luck, including the tcon ribbons. I also wiggled connectors with the set on and noticed no change in the picture.
I don't want to throw boards at it and need help determining where to go next.
The main board is numbered DDM42_V7
The tcon board is numbered T420XW01 V4
Thank you for your help!
Josh
Comment