As above gets worse as it gets warmer
Attached Files
-
Last edited by adamp91gvm; 04-13-2014, 01:53 PM. -
Re: philips 32 lcd keeps going on and off even when all caps have been changed
Model 32pf9631d -
Re: philips 32 lcd keeps going on and off even when all caps have been changed
So... what have you tested so far? Should we just throw random guesses out? Maybe try checking PSU voltages. Any LED blinking? Check service menu (062596 then info+ or sometimes info+ 062596) for error codes.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
I had nothing on the tv could not find a book all voltages seem to be right no error leds at allComment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
What's the chassis code? If unsure, post a picture of the model # sticker. Voltages OK when it goes off? Does backlight go out? What about sound?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
Nothing stored in service menuAttached FilesComment
-
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
Everything goes off on it then resetsComment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
Chassis is FJ3.0ELA.
Service manuals can be found on my site, as well as elektrotanya, servicemanuals.pro, and possibly many others.
So when it goes off the power supply rails, do they drop out or not?
Does it reboot immediately, or do you have to turn it back on?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
Power drops slightly it seems to stay on when there is nothing plugged in but as soon as hdmi or scart goes in it starts going off it drops from 15.68v to 14.47v and it restarts it's selfComment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
WHAT drops from 15.6V to 14.4V? What is it labelled?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Comment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
its labelled 1306 on the power board and goes to the audio standbyComment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
I don't know every TV chassis off by heart so if you would be as kind to highlight this component on a photo I might be able to make a guess. What about the answers to my other questions?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
I'll get a pic in a mo for you I put a video up to show what it's doing it turns back on its selfComment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
Just there to the audio boardAttached FilesComment
-
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
No idea if that's OK, but if that part is only for audio I would exclude it for now. The way it turns off almost looks like panel 12V fails and it might be resetting because of this, try locating t-con board and check fuse voltages.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
13 v going to the t con ?Comment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
13V steady? Or not?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
12v now sorted voltage on t con but still goes off as soon as I plug and play my blue ray through hdmiComment
-
Re: philips 32 lcd keeps going on and off even when all caps have been changed
Yer its steady till it goes offComment
-
ASUS ROG Ally X - (Handheld Gaming PC)
Model No: RC72LA
Serial No: SBNVKD001014459
Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.
I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For... -
Hello,
I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
I thought maybe the speakers got damaged, so I replaced them - no dice.- Using the internal speakers, it always happens.
- Using the headphone jack, it never happens.
- Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
-
I got here an philips 37pf8404 with a solarized image. image one
First guess its a bad as15f. so I replaced it with another. Same issues
So I replaced it again with a rm5101. Same issues
Problem is that is projecting a solarized image irregularly. When I pull the hdmi cable and put it back all is okay for a undetermined time. It also helps if I change the input from one hdmi port and back.
One thing thats weird and I don't remember if it was the case with the previous tvs I repaired.
When the image is solarized it doesn't affect... -
Hello Team,
New issue on LCD panel where I need to find out the cause and the potential solution.
This is on the Philips 50PUH6400, the LCD panel is an INNOLUX V500dk2 xrs1.
I have image, on the right side, the image is more or less normal even if there is a small blur on edge, on the left there is an issue.
When moving up and down in the menu on the right the image is slow to disappear, and is darker, like red/brown.
I've checked voltages, no issue found comparing right and left side of the panel driver.
VHG VGL CKV... are the sames on... -
Hello partners.
Could someone tell me how to make this Philips TV source work without the mainboard being connected? The model of the board is EAX65423701 (2.1) and the model of the Philips TV is 40PFH40009/88.
The TV is dead, there is no standby light, however there is a voltage of 12v on the pins ( included 12v VAU ) and 3.2v on the PS-ON pin (see photo) when the power board is connected to the main board. If I disconnect both boards I only get 8 volts on 12v pins. I would like to rule out a fault in the main board by making it work, but so far no one has been able to tell...
Comment