Re: Samsung LE26A457C1D Power problem, It Banged
Any standby output from power supply?
Any standby output from power supply?
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search. -
Re: Samsung LE26A457C1D Power problem, It Banged
Nothing at all, it blws the slow blow 6.3 everytimeComment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Is there a BN44-###### number printed on the power board? To look up schematic.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Bn44-00214aComment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Great. Got it
So it is FP801S that is blowing? (6.3AH)Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
You could start checking for full shorts. on all the big components. Perhaps start with the
3 diodes at the end of the board furthest from the mains socket.
I would still consider making up a light bulb.
You did get the bridge in the right way round? and test it again.
Perhaps a clear picture of the back of the board would help usPlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Yep thats the fuse blowing, including the one in plug lead
I thought about the light bulb but its something i couldnt get my head around and the shop round here only sells some nasty looking things that look like there made for offices and mine are led :/
T rectifier oh cock! its in wrong way round! i put it in writing facing forwards instead of cut corner to the left lmao! Hangs head in shame!
I will turn it around in a couple of hours when i get back and let you know
Thanks for that :P i feel a right Noob nowComment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Better test it again when you take it out, in case you have cocked sorry cooked it.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Thinking the same thing, good job I ordered 2
now when I turn it around , I Will be edging away from the plug socket as I knock it in with a brush pole expecting a loud bang lol
Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Ok so ive taked the bridge out and tested it and its fine, however it still blew the fuse. I then started testing all the diodes so i disconnected them all and checked all of them and all again seem fine :/Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
And thats the underside
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: Samsung LE26A457C1D Power problem, It Banged
If you power it up without the bridge installed does the fuse still blow?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
My soldering iron resembles that of a iron thats used to stamp burns into the ass of a cow, and if i remove it again the board around the bridge might be destroyed beyond repair so im a bit scared to take it out unless its the only way
it only blew the 5 am fuse in the plug this time and not the one on board, i was looking and forgive me i dont know what some of them are but if the green thing above power connector or resistor or the white box marked 330n K things that connect straight after fuse line between live and negative, do they fail often and allow current to short out?Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
They can, there's also usually a MOV which can fail short, it is surge protector.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Just out of poking around i poped out resister RX801S and tested it and the meter didnt read anything from it either way around :/Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
got to say had to laugh at this i can imagain you doing it lolComment
-
Re: Samsung LE26A457C1D Power problem, It Banged
I realy did do it lol
I remember when i was like 6 or 7 and had a little black and white tv with a music tape player on in the bedroom , i went to plug it in one morning and we had plug sockets without on/off switches on them, and i pushed the plug in and it went was a bang and sparks flew out of the plug arc ing like realy scarey and the wire fell out of the plug and i kinda craped myself then tooComment
-
Re: Samsung LE26A457C1D Power problem, It Banged
MOV:- http://en.wikipedia.org/wiki/Varistor
for future ref.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung LE26A457C1D Power problem, It Banged
Ok it didnt blow after i took out the bridgeComment
-
I have an LG Plasma TV 60PM6700 for the past ~12 years.
In the last ~3-4 months I have been having some issues.- Problem: It started with random picture disappearing (sound still worked).
Frequency: Happened about once a week.
Solution: Had to turn off TV wait a few seconds before turning it on again. - Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
Frequency: Happened about once a week.
Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve. - Problem: TV shuts down
- Problem: It started with random picture disappearing (sound still worked).
-
When I reflash again the bios of hoaca388 the unit powers on and the unit lives!!! Hooray!! All voltage in the coil 3.3v, 5v and 6.7v indicate charging are all present. including the cpu voltage , EEPROM and GPU voltage the unit is now alive, normal screen booting to windows and log in screen until I power it off. Then the unit never goes on even when pressing the power button in the keyboard.. Voltage reading 19v main , 3.3v VCC in IT8225E-128 and EEPROM VCC 0 volt and the charging voltage 0 volt.
Try to trace the power switch button goin to the power switch IC PU8803 (APL3533AQBI-TRG)... -
I gotten a Carver CM-1090 amplifier from a friend who has kept it in storage for decades. Opened it up, thick layer of dust cumulated everywhere. Vacuumed it semi-cleaned, and blown off as much as possible the remaining dust. This is a 220V version.
On initial powered up with nothing connected - it works with all the lights and button indicator lit up as pressed, etc. I then powered off, connected a CD player into the CD RCA input and powered it on. It seemed to work for a short while and when I turned the volume up and down to see the the VUs works, the power started to clicked off... -
Hello, trying to fix C9 55 inch. I have pulled the back and all looks completely normal with nothing burnt so far. This is first time attempting to fix a tv so any help is appreciated.
Problem. I hit power button, red light on TV turns off and tries to turn on, no picture shows up and then shuts off. This occurred after house power turned on and off, not from a storm.
I have tested the power going from power supply to main board, all 12v and 20 volt readings are proper when I hit power button.
The power supply to t con is different story.
This... -
Just starting to crack into this one and wanted to get the ball rolling.
At power on (plug in), power light on, relays click, repeat (sometimes)
After disconnecting Y-Main from SMPS power stays on and boot up jingle is heard from speakers
Removed Y-Main for inspection and testing
This pic from:
PN50C540G3FXZA Fast Track Troubleshooting Manual - Rev 1/10/12
...
Comment