Announcement

Collapse
No announcement yet.

Vizio VW32L HDTV40A, Went bang, Now no power, :-o

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vizio VW32L HDTV40A, Went bang, Now no power, :-o

    Just got this 32 inch vizio vw32l hdtv40a, I pluged power in to it and as soon as i switched it on something made a prety big bang and no it is completely dead with no signs of power, Is this a common fault with this set and is there any ways i can repair it?? Thanks.. ;-)

    #2
    Re: Vizio VW32L HDTV40A, Went bang, Now no power, :-o

    "i switched it on something made a pretty big bang" I would first inspect it real well to see if there is any blown parts inside. Pictures of the inside?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #3
      Re: Vizio VW32L HDTV40A, Went bang, Now no power, :-o

      hi

      did you have any ideas on electronics

      Comment


        #4
        Re: Vizio VW32L HDTV40A, Went bang, Now no power, :-o

        Budm, that is very diplomatic -
        "I pluged power in to it and as soon as i switched it on something made a prety big bang and no it is completely dead with no signs of power is there any ways i can repair it?? "

        I was thinking along the lines of " how the hell would we know"
        Please upload pictures using attachment function when ask for help on the repair
        http://www.badcaps.net/forum/showthread.php?t=39740

        Comment


          #5
          Re: Vizio VW32L HDTV40A, Went bang, Now no power, :-o

          So I opened a power supply that had been hit by a power surge and the fuse is gone and two 16n25c mosfets are shorted. I am not that good on crossing mosfets but I have two smk1430 mosfets which are n-channel and I wondered if I could use them or do I need to wait for the actual part for a week?

          Comment


            #6
            Re: Vizio VW32L HDTV40A, Went bang, Now no power, :-o

            Pictures and model number of this power supply? More likely the IC that drives the MOSFETs will be damaged also.
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            Working...
            X