HI
I have a Samsung LE32b530 and it is not coming out of standby.
Downloaded the schema from another forum post(thanks Tom) and checked all the likely suspects ie fets fuses cold joints, all ok
If I power up the tv with the main disconnected I get
on/off = 1.51v
inv on/off = 2.09v
As soon as I plug the main board back in both these voltages go to zero
The 5.3 pin stays constant with main plugged in or out at 5.24v
Any ideas, could this be a main or a psu/inverter fault
I dont get a backlight flash either with main connected/disconnected
Thanks for any help
I have a Samsung LE32b530 and it is not coming out of standby.
Downloaded the schema from another forum post(thanks Tom) and checked all the likely suspects ie fets fuses cold joints, all ok
If I power up the tv with the main disconnected I get
on/off = 1.51v
inv on/off = 2.09v
As soon as I plug the main board back in both these voltages go to zero
The 5.3 pin stays constant with main plugged in or out at 5.24v
Any ideas, could this be a main or a psu/inverter fault
I dont get a backlight flash either with main connected/disconnected
Thanks for any help
Comment