Vizio VP503 HDTV10a Black Screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #41
    Re: Vizio VP503 HDTV10a Black Screen

    OK, on P7 -- check the attached pin outs for voltages. On P7 I expect a 5V or 15V standby voltage.
    Attached Files
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • MyHD120
      Senior Member
      • Jan 2013
      • 79
      • USA

      #42
      Re: Vizio VP503 HDTV10a Black Screen

      Thanks. Was getting ready for the big winter storm from NYC to Boston. Might be losing power today or tomorrow. Will get these numbers to you ASAP.

      Comment

      • MyHD120
        Senior Member
        • Jan 2013
        • 79
        • USA

        #43
        Re: Vizio VP503 HDTV10a Black Screen

        P7 pin outs on stand by. See photos
        Attached Files

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #44
          Re: Vizio VP503 HDTV10a Black Screen

          OK, PSU is being TOLD to turn on, so check P6 in the same image for 15V supply.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • MyHD120
            Senior Member
            • Jan 2013
            • 79
            • USA

            #45
            Re: Vizio VP503 HDTV10a Black Screen

            See Photos.
            Attached Files

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK

              #46
              Re: Vizio VP503 HDTV10a Black Screen

              OK, so as expected the Panasonic PSU is working, the Vizio parts are probably failed. We need to look at that DC-DC converter board. Also, have you checked the voltage regulators on the main board? Very common issue with Vizio main boards.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment

              • MyHD120
                Senior Member
                • Jan 2013
                • 79
                • USA

                #47
                Re: Vizio VP503 HDTV10a Black Screen

                Originally posted by tom66
                . We need to look at that DC-DC converter board.
                How would I do this?

                Originally posted by tom66
                Also, have you checked the voltage regulators on the main board? Very common issue with Vizio main boards.

                So, I'll have to pull the Main and remove the voltage regulators to check them? I think I have something about checking them.

                Going back a bit: I mentioned that after power on I get shut down after 30 seconds. LED goes back to orange.

                Also, the LED's on the SC and SS boards fade out 20 seconds after power on.

                Do these symptoms tell you anything?

                Comment

                • MyHD120
                  Senior Member
                  • Jan 2013
                  • 79
                  • USA

                  #48
                  Re: Vizio VP503 HDTV10a Black Screen

                  I'm now reading retiredcaps, "How to test a voltage regulator". Good stuff.

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK

                    #49
                    Re: Vizio VP503 HDTV10a Black Screen

                    It tells me that Vsus is coming up but then shutting down after some time probably due to main board problem.
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • bjorkson
                      Senior Member
                      • Apr 2012
                      • 127
                      • USA

                      #50
                      Vizio VX32L black lines

                      I have a 32in Vizio LCD VX32L with constant black lines on the screen. Do you guys think this is a bad inverter or t-con board? Or bad LCD panel?
                      I have attached a pic...any help is appreciated. Thanks.
                      Attached Files

                      Comment

                      • tom66
                        EVs Rule
                        • Apr 2011
                        • 32560
                        • UK

                        #51
                        Re: Vizio VX32L black lines

                        Originally posted by bjorkson
                        I have a 32in Vizio LCD VX32L with constant black lines on the screen. Do you guys think this is a bad inverter or t-con board? Or bad LCD panel?
                        I have attached a pic...any help is appreciated. Thanks.
                        You really need to put that in a separate thread. We will keep discussing the VP503 here. If you need help, PM a moderator. I am not a moderator.
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        • MyHD120
                          Senior Member
                          • Jan 2013
                          • 79
                          • USA

                          #52
                          Re: Vizio VP503 HDTV10a Black Screen

                          Regulator Tests: I hope I get this right.

                          (U15) 1084 center leg not connected

                          Pin 1; 2.078v
                          Pin 2; 3.321v
                          Pin 3; 5.17v


                          (U19) 1084 center leg not connected

                          Pin 1; 12.52v
                          Pin 2; 2.478v
                          Pin 3; 5.18v

                          (U20) 1084 center leg not connected

                          Pin 1; .555v
                          Pin 2; 1.803v
                          Pin 3; 3.294v


                          (U16) 7805CT (ON MC)

                          Pin1; 12.01v
                          Pin2; 0v
                          Pin 3; 5.04v


                          (U22) AMC 1117 (F0816G)

                          Pin 1; 2.09v
                          Pin 2; 3.339v
                          Pin 3; 4.93v

                          (U21) AMC 1117 (F0816G)

                          Pin 1; 0v
                          Pin 2; 1.25v
                          Pin 3; 2.486v


                          (U27) AMC 1117 (F0816G)

                          Pin 1; 2.074v
                          Pin 2; 3.325v
                          Pin 3; 5.18v

                          Comment

                          • martyparish
                            Badcaps Veteran
                            • Dec 2012
                            • 313
                            • United States

                            #53
                            Re: Vizio VP503 HDTV10a Black Screen

                            I'n no expert but U16 looks suspect. You may want to double check that one just to be sure of the readings.

                            Comment

                            • MyHD120
                              Senior Member
                              • Jan 2013
                              • 79
                              • USA

                              #54
                              Re: Vizio VP503 HDTV10a Black Screen

                              Rechecked U16. All voltages are the same as above. Pin 2 sometimes shows a .2Mv.

                              U27 above should be labeled U17
                              Last edited by MyHD120; 02-09-2013, 09:51 AM.

                              Comment

                              • retiredcaps
                                Badcaps Legend
                                • Apr 2010
                                • 9271

                                #55
                                Re: Vizio VP503 HDTV10a Black Screen

                                U16 is correct. It is your classic 7805 5V regulator.

                                On U19 for pin 1, do you mean 1.252 and not 12.52V?
                                --- begin sig file ---

                                If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                                We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                                Please do not post inline and offsite as they slow down the loading of pages.

                                --- end sig file ---

                                Comment

                                • MyHD120
                                  Senior Member
                                  • Jan 2013
                                  • 79
                                  • USA

                                  #56
                                  Re: Vizio VP503 HDTV10a Black Screen

                                  Originally posted by retiredcaps
                                  U16 is correct. It is your classic 7805 5V regulator.

                                  On U19 for pin 1, do you mean 1.252 and not 12.52V?
                                  My bad. 1.252. If you see any bad regulators can you point me directly to where I can buy the part and the exact part number? I cannot understand those datasheets.

                                  Comment

                                  • MyHD120
                                    Senior Member
                                    • Jan 2013
                                    • 79
                                    • USA

                                    #57
                                    Re: Vizio VP503 HDTV10a Black Screen

                                    Bump

                                    Comment

                                    • tom66
                                      EVs Rule
                                      • Apr 2011
                                      • 32560
                                      • UK

                                      #58
                                      Re: Vizio VP503 HDTV10a Black Screen

                                      The regulators look OK. When you press the power button does anything on P6 change?
                                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                      Comment

                                      • MyHD120
                                        Senior Member
                                        • Jan 2013
                                        • 79
                                        • USA

                                        #59
                                        Re: Vizio VP503 HDTV10a Black Screen

                                        During standby, all are in the mv stage. Power on changes pin 7 & 8 (?) to 15.26v. See photo from post 45 above.
                                        Last edited by MyHD120; 02-10-2013, 05:36 AM.

                                        Comment

                                        • tom66
                                          EVs Rule
                                          • Apr 2011
                                          • 32560
                                          • UK

                                          #60
                                          Re: Vizio VP503 HDTV10a Black Screen

                                          OK, so since the PSU is working fine, the problem is on the main board -- a very common defect with Vizio TVs. If the regulators are fine it could be a firmware issue, but you may need to simply swap the board out.
                                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                          Comment

                                          Related Topics

                                          Collapse

                                          • m1ch43lzm
                                            HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                            by m1ch43lzm
                                            Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                            Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                            05-12-2025, 08:37 PM
                                          • Tynan Dill
                                            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                            by Tynan Dill
                                            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                            Upon bringing it home and plugging it up, it showed a standby light.

                                            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                            The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                            Assuming...
                                            11-22-2024, 01:46 PM
                                          • TheDando
                                            MSI GS66 Stealth 11ue-007us Board Number MS-16V41 VER.1 Screen Connector
                                            by TheDando
                                            Hey guys I've got a MSI GS66 Stealth 11ue-007us Board Number MS-16V41 VER.1 with a broken screen connector on the motherboard.I was wondering how I would go about finding a exact replacement for it.I can't seem to find any schematics that would help me so I'm kinda stumped.I did buy a screen connector that I thought was close enough but it doesn't really invoke much confidence in me that it works perfectly as plugging the screen into sometimes does output a "glitchy" image for just a few seconds.So now I'm kinda in a cross road where I'm pretty sure it could be a faulty screen but I...
                                            10-28-2024, 06:59 PM
                                          • howardc64
                                            A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                                            by howardc64
                                            Problem

                                            This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                                            08-04-2024, 10:36 PM
                                          • mrtek
                                            Samsung UN65js8500F, no sound, blank screen and T-Con board with one LED on
                                            by mrtek
                                            Hi I am new to this kind of repairs but I want to learn..I have a Samsung UN65JS8500F. the TV used to work and I tried to fix darker areas in the middle only ( img 1,2,3). I thought the led strip were bad..not the case. I did not research in advance what kind and where the LED were located. In this model they are located vertically on right and left side. Took the TV apart and put it back together. Now the tv shows no welcome screen and no sound is available thru the speakers. ..just a black screen..Backlight LED do turn on...also noticed a 5 blink code , not sure if that was there before. I can...
                                            11-26-2024, 09:58 AM
                                          • Loading...
                                          • No more items.
                                          Working...