Sony XBR-52HX909 No Power -Red LED blinks 5 times

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12081
    • U.S.

    #21
    Re: Sony XBR-52HX909 No Power -Red LED blinks 5 times

    There are two connectors going to tcon, one going to mainboard and one going to powerboard, looks like one of those signals is missing?
    Last edited by nomoresonys; 08-08-2019, 05:56 PM.

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #22
      Re: Sony XBR-52HX909 No Power -Red LED blinks 5 times

      Originally posted by tvfixer007
      I checked the fuse on the LED board meter reads 000.1

      Tested voltage across each end of fuse and meter reads 12.68
      Can you please clarify as to how you perform the test?
      Did you put meter probes on each end of the fuse and it shows 12V, or you keep one probe on the chassis at all time and then probe each end of the fuse one at a time and it shows 12V on each end?
      Last edited by budm; 08-08-2019, 09:48 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • tvfixer007
        Senior Member
        • Feb 2015
        • 86
        • United States

        #23
        Re: Sony XBR-52HX909 No Power -Red LED blinks 5 times

        I'll check the fuses today and report back.

        Comment

        • nomoresonys
          Badcaps Legend
          • Jan 2013
          • 12081
          • U.S.

          #24
          Re: Sony XBR-52HX909 No Power -Red LED blinks 5 times

          So two weeks then?

          Comment

          • tvfixer007
            Senior Member
            • Feb 2015
            • 86
            • United States

            #25
            Re: Sony XBR-52HX909 No Power -Red LED blinks 5 times

            Sorry I had to take a break and do tons of house work. I got back to the TV. On the LED drive board I used Ohm to test the fuses.

            On the t-con board I tested voltage with one probe on chassis I get 12.56v on each side of every fuse. Before the red light sequence.

            Comment

            • renee
              Member
              • Jun 2010
              • 21

              #26
              Re: Sony XBR-52HX909 No Power -Red LED blinks 5 times

              please help me to find volts PRI_VCC on C6206 sony G6 power supply

              Comment

              Related Topics

              Collapse

              • Tynan Dill
                Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                by Tynan Dill
                I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                Upon bringing it home and plugging it up, it showed a standby light.

                I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                The screen seems to blackout and stay black, but with a flashlight I can see the display.

                With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                Assuming...
                11-22-2024, 01:46 PM
              • PantherDave
                Microsoft Surface Pro (5th gen) model 1796 - no power
                by PantherDave
                Hi all!

                I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                https://www.badcaps.net/forum/troubl...-hardware-devi...
                05-29-2024, 02:01 PM
              • GLISIT
                Asus Probook P5440UF-XB74 power issue
                by GLISIT
                Hi all,

                TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                01-16-2025, 02:29 PM
              • magneh
                TX-65FZ800E - blinks 2 times red led no power
                by magneh
                Hi there

                I have this set with no power, blinks power led twice.

                This seems to point out to D board issue

                My first question is which one is the D board?
                The main board?

                Or one of the power boards?
                Are they labeled with this? (did not checked the boards yet)

                Thanks for any inputs...
                08-23-2023, 09:02 AM
              • Mcologist
                Sony KDL-52Z5100 power relay clicks 4 times then standby blinks 10 times
                by Mcologist
                Hello,

                Troubleshooting a Sony KDL-52Z5100 and when you plug it in the power relay clicks on and off 4 times and then stays off and the standby light blinks in groups of 10 repeatedly.

                I checked the standby voltage going to the main board and it stays consistent at 3.3v the whole time.
                The other voltages coming from the main power board all match their written values.
                The "power on" connection coming from the main board to the power board changes between 3.3v and 0v while the relay is clicking.

                The issue also occurs when only...
                04-08-2019, 03:30 PM
              • Loading...
              • No more items.
              Working...