52LG50 Has Mind of its own

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Lireb93
    Member
    • Dec 2012
    • 20
    • United States

    #1

    52LG50 Has Mind of its own

    TV is about 4 yrs old, and never had a problem, that is until now. You go to turn it on, with remote or by hand, and it comes on, off, on, off, ect for what seems like an eternity but then comes on and works just fine. Then when you go to power it off, sometimes it works and sometimes not. Have had 2 different technicians look at it and they are saying it is either the main board, or the power supply board. Would like to repair myself if at all possible, so any suggestions would be greatly appreciated.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: 52LG50 Has Mind of its own

    My first consideration would be the power button itself getting stuck (not turning off here is a clue), but LG do also have lots of problems with bad capacitors.

    There's a board for the buttons usually. Try locating this and unplugging it, then use the remote. Does it still encounter problems?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • Lireb93
      Member
      • Dec 2012
      • 20
      • United States

      #3
      Re: 52LG50 Has Mind of its own

      At work now, but will try later, probably tomorrow and let you know.

      Comment

      • kartwood
        Member
        • Dec 2012
        • 18
        • Canada

        #4
        Re: 52LG50 Has Mind of its own

        Consider replacing the Front Panel PCB assy. It may be something like: EBR42597903 and usually quite reasonably priced.

        been down that road several times....

        Comment

        • Lireb93
          Member
          • Dec 2012
          • 20
          • United States

          #5
          Re: 52LG50 Has Mind of its own

          Found the board for the on/off button. Unplugged both connectors and tried remote, which nothing happened. Shouldn't one be plugged in and other not and then try remote? One lead goes to the buttons on side of the TV while the other I believe goes to the main board.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: 52LG50 Has Mind of its own

            Maybe the on-off button board has the IR sensor on it? In which case unplugging it will mean you won't be able to turn the TV on. You may just need to replace the board.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • Lireb93
              Member
              • Dec 2012
              • 20
              • United States

              #7
              Re: 52LG50 Has Mind of its own

              So you believe it to be that board?

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: 52LG50 Has Mind of its own

                It would be my first check point.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • Lireb93
                  Member
                  • Dec 2012
                  • 20
                  • United States

                  #9
                  Re: 52LG50 Has Mind of its own

                  My wife said that while the TV was on, she unplugged it from the wall and took the switch completely out, plugged it back in and it still did the same thing, on,off,on,off,ect. So if that is the case, what next, the main board?

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK

                    #10
                    Re: 52LG50 Has Mind of its own

                    What switch are you talking about? The plug switch, one on the TV, or something else?
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • Lireb93
                      Member
                      • Dec 2012
                      • 20
                      • United States

                      #11
                      Re: 52LG50 Has Mind of its own

                      The on/off button board that has the IR sensor on it. (EBR42597903)

                      Comment

                      • Lireb93
                        Member
                        • Dec 2012
                        • 20
                        • United States

                        #12
                        Re: 52LG50 Has Mind of its own

                        I took the switch and the main board out. Checked the connections, blew the dust out and put back together. Seemed to work fine until last evening, and it started on and off again. My wife seems to think that it is being interrupted by the signal from the house phone. Is that possible, and if so, wouldn't that be the switch because it has the sensor attached?

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK

                          #13
                          Re: 52LG50 Has Mind of its own

                          I doubt it would be related to a phone, cordless or not.

                          Since you cleaned the switch and it worked, the switch still has contamination, it just needs either more cleaning or to be replaced.
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • budm
                            Badcaps Legend
                            • Feb 2010
                            • 40746
                            • USA

                            #14
                            Re: 52LG50 Has Mind of its own

                            Any pictures of the board?
                            Never stop learning
                            Basic LCD TV and Monitor troubleshooting guides.
                            http://www.badcaps.net/forum/showthr...956#post305956

                            Voltage Regulator (LDO) testing:
                            http://www.badcaps.net/forum/showthr...999#post300999

                            Inverter testing using old CFL:
                            http://www.badcaps.net/forum/showthr...er+testing+cfl

                            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                            http://s807.photobucket.com/user/budm/library/

                            TV Factory reset codes listing:
                            http://www.badcaps.net/forum/showthread.php?t=24809

                            Comment

                            • Lireb93
                              Member
                              • Dec 2012
                              • 20
                              • United States

                              #15
                              Re: 52LG50 Has Mind of its own

                              The Main Board?The P/N is EBU41909802. Nothing seemed to be out of place as far as I could tell. No hot spots, or broken connections that I could see. Have had 2 different repairmen out and they both said it was more than likely the main board because it probably got an electrical surge through the HD cable. Should I just go ahead and replace the main board and the on/off switch?

                              Comment

                              • Lireb93
                                Member
                                • Dec 2012
                                • 20
                                • United States

                                #16
                                Re: 52LG50 Has Mind of its own

                                Changed out the switch and it is still cycling on and off. Would it be the main board or the power supply next?

                                Comment

                                • tom66
                                  EVs Rule
                                  • Apr 2011
                                  • 32560
                                  • UK

                                  #17
                                  Re: 52LG50 Has Mind of its own

                                  Have you done a service reset?
                                  MENU on remote and MENU on TV at same time for 5~10 seconds, then find reset option and select.
                                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment

                                  • randtek
                                    Badcaps Veteran
                                    • Oct 2011
                                    • 280
                                    • US

                                    #18
                                    Re: 52LG50 Has Mind of its own

                                    If the problem still occurs with the Function Switch board disconnected at the main board, the main board is your problem. I have had this type of problem on several LG sets, and it can be caused by either the Function Switch CBA or the Main. This is not a power board issue.

                                    Comment

                                    • Lireb93
                                      Member
                                      • Dec 2012
                                      • 20
                                      • United States

                                      #19
                                      Re: 52LG50 Has Mind of its own

                                      Attempted the service reset, and after the 5-10 seconds, the prompt on the screen for password came up. I entered the password and it went to a screen that I never seen before. Did not however find a reset. Is it on the remote?

                                      Comment

                                      • tom66
                                        EVs Rule
                                        • Apr 2011
                                        • 32560
                                        • UK

                                        #20
                                        Re: 52LG50 Has Mind of its own

                                        What is the password?
                                        Never heard of that before on an LG...

                                        It may be buried in one of many menus.
                                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                        Comment

                                        Related Topics

                                        Collapse

                                        • sam_sam_sam
                                          Heater element wire type instead of a fuse when troubleshooting a short circuit DIY
                                          by sam_sam_sam
                                          I was Ollie today which is a close out / surplus outlet store I do not go in there to often because you find things that you should not be tempted by but that is a another story

                                          I saw a small space heater that used a wire type of heater element which I been looking for a while but not really hard mind you but when I saw this I grabbed it I going to go back tomorrow and buy the last one that is like the one I bought today because I need the heater element and the ceramic insulators and more of heat element wire because this one has two different wattage settings one 1300 watts ( tap...
                                          12-16-2023, 08:39 PM
                                        • rddube
                                          Lenovo L490 Ram voltage circuit malfunction
                                          by rddube
                                          Hello friends,

                                          Looking for some guidance here. The RAM voltage circuit on this motherboard keeps burning out PU301 which is a RT8231AGQW. Copy of the board with the burnt chip attached with some voltage measurements and copy of the schematics also included.

                                          I think I've checked almost every component in the circuit, but when I change the RT8231, the laptop starts I have 1.2V on the inductor for about 10 seconds and then the RT8231 goes south and no more voltage on the inductor. All other voltages on the laptop are good, this is the only one conking out for a reason I...
                                          07-15-2025, 04:41 PM
                                        • notallbad
                                          TCL 55RP620K power board issue
                                          by notallbad
                                          Originally the tv arrived with dimmed backlights (not failed leds) but everything else worked ok. Adjusting backlight in menu did nothing but voltage changed on dimming control pins,
                                          0% p_dim at 1.65v and a_dim at 1v
                                          50% p_dim at 3.3v and a_dim at 1.65v
                                          100% p_dim at 3.3v and a_dim at 2.88v

                                          Changed backlight leds anyway as always like to have complete peace of mind they wont fail shortly after selling the tv. No change as expected!

                                          Leds are 2 rows of 15 6v leds.

                                          On inspection of the power board found diode MBR3200 shorted so replaced with...
                                          07-12-2025, 05:45 AM
                                        • schematic_jack
                                          ASUS TUF B450-PLUS II motherboard schematics, or does this 60B SMD resistor even matter?
                                          by schematic_jack
                                          I think it would be dumb to toss a "modern" motherboard just because a resistor got scraped off, so here I am. I am hoping to find the right schematic so I can see if the motherboard can live without 1 of 3 60B SMDs in series likely scratched off by the backplate of a PCI-E card install or removal. It could be related to a functionality that is not needed or critical, or it could fry anything I plug into it and power on. If I could find a replacement, I could likely pop in on the board, but if I don't need to, then screw it, I don't mind leaving something dark that doesn't matter....
                                          07-06-2025, 02:00 PM
                                        • JoWed
                                          Problems with reflashing BIOS Chip on omen by hp laptop 17 an104ng
                                          by JoWed
                                          Hello Community,

                                          I recently tried to change the Batterie on my Omen by HP Laptop 17 an104ng and after putting in the new batterie ([Batterie Link](https://www.amazon.de/7xinbox-17-AN0...&keywords=16%2...
                                          07-01-2025, 09:32 AM
                                        • Loading...
                                        • No more items.
                                        Working...