Factory Resets Listing

[Farasa]

Re: Factory Resets Listing

Hello all

I urgently need Service menu for Sinotec led tv.....thanks in advance

[egypt]

Re: Factory Resets Listing

Bravo led32 bed11 main-hk.t.rda8501p538

[captainKKK]

Re: Factory Resets Listing

Pardon if repeats.....

Service Mode / Factory Mode Entry Procedure to different brand Televisions.
Chinese Sets
Hold down (Volume down) on set and press 'Recall' on remote.
'Recall' is the button that activates the channel number and clock onscreen.
After you have made your changes, in most cases, pressing 'POWER' on the remote will clear (Exit) the factory mode.
On some models pressing the 'AV' button will revert things to normal operation.
In rare cases, the sequence first described above (Vol - on set and recall on remote) will have to be repeated at least once more.
If none of the above methods works, try using a universal remote - best one that has a LOT of in-built models.
Search through the available models looking for any that suddenly causes the set to change channels.
Lock this setting into the remote and press '2'.
Factory mode should appear.
COBY
Enter menu, Hi-Lite “audio” then enter 8893 Mode/Source 2580 select “Other setting”, select “Shipment” then Yes
To exit the service menu “Power Off”.
Dynex
Source/Input 2580
Hold Vol down on TV and hold the (#1) button on remote, Vol will jump to halfway and set shuts off.
Turn back on have 1st time setup screen.
Source/Input 2580 > menu 1999 (TV is on)
Element
Menu 0000 > menu 1147
Haier
Pull up menu, Hi-Lite “audio” then enter 8893.
Hisense
In customer menu go to “Parental” enter 0000 then select “Clean All”.
Power the set OFF and back ON and first time setup menu will be there.
For some models, same as above model except in menu it is labeled “Lock”.
Insignia
Input 2580 (TV is on)
LG / Zenith
Hold MENU on TV and MENU on remote for 5 to 10 seconds, then select reset option.
Mitsubishi
Menu 123 or Menu 2470 (TV is on)
NEC
While powering ON, hold "MENU" or "INPUT" on TV, depending on model. (Only disables error lock out/buffer and puts TV in temporary service mode.)
To reset to factory > on remote, Off Timer - Menu - Exit - Off Timer, then select reset option.
Panasonic
Hold [VOL--] on TV, press and hold menu button on remote.
Philips
Push Menu, select “Features” then select “Current software Info” push 062596-info on remote then push info again; red “Initialize” appears and changes color then complete.
Push power button to exit.
Polaroid
Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+] (TV is on)
Proscan
In customer menu go to setup, select parental control menu, enter 0000 then select “clear channel list”.
RCA
Menu 1147
Sanyo
Hold VOL Down on TV, press and hold #1 button on remote, VOL will jump to halfway and set shuts off.
Turn back on have 1st time setup screen.
Samsung
Mute 182 power (TV is off)
(On some models, Factory Reset is on this menu, on some, you must go into the “Options” submenu)
Most newer Samsung TVs have an easy to access reset method.
Press and hold the Exit Button on the Remote for at least 10 seconds until a reset screen appears.
Follow the on screen prompts to reset the TV.
Samsung (European)
Power off, Info - Menu - Mute - Power, then find factory reset and execute option.
Seiki
Menu 0000
Sharp
(Note – On Sharp models, you will need to look through the menus to find the reset option)
Menu, 1999
Menu, 3481
Menu, 1147
While holding [VOL– & INPUT] buttons on TV plug in set when “K” appears push (VOL– & CHANNEL-)
Sony
Hold “arrow up” on Remote and push power button on TV (TV is ON)
Symphony
Source/input 2580
Toshiba
On Menu, select “Installation”, then “System Information” press the right arrow button.
(“System Information” will change to “Factory Reset” or something similar) follow on-screen instructions
Vestel
Menu 4725 then select "RESET"
Vision Quest
Source / Input 2580
Vizio
In customer menu under “Help” tab is Factory Default enter 0000
[If more than one procedure is listed for a given manufacturer, try the different ones until you see which one works for your set.]

[frankstv]

Re: Factory Resets Listing

awsome information

[lookimback]

Re: Factory Resets Listing

Polaroid 50GSR3000 (probably others too) service menu:
press menu then 1147

[Hosin0]

Re: Factory Resets Listing

Спасибо, брат

[Hosin0]

Re: Factory Resets Listing

From drpj23:https://www.badcaps.net/forum/showth...483#post296483 post 5

A little googling to the service mode
Vizio Service Menu Method 1
1. Turn The TV off.
2. Press and hold the {CH +} & {CH -} buttons on the TV.
3. Then press and release the {POWER} button on the TV.
4. Release the {CH +} & {CH -} buttons.
5. Now press the {MENU} button on the remote.
6. You should get your regular menu up, but with a "F" in the bottom right corner of the menu (This is for factory).
7. Press and hold the {MENU} button for few seconds.
8. The Service Menu will be displayed.
Vizio Service Menu Method 2
1. Turn The TV off.
2. Press and hold the {CH +} & {CH -} buttons on the TV.
3. Then press and hold the {POWER} button on the TV.
4. Keep all three buttons pressed for few seconds.
5. Now press the {MENU} button on the remote.
6. You should get your regular menu up, but with a "F" in the bottom right corner of the menu (This is for factory).
7. Press and hold the {MENU} button for few seconds.
8. The Service Menu will be displayed.
Vizio Service Menu Method 3
1. Press and hold the {EXIT} button on the remote for 3 seconds then release it.
2. Then press the {1} {2} {3} buttons on the remote.
3. To exit, press the {EXIT} button.
---------------------------------------------------------------
GV42L FHDTV10A / JV50 / SV42 / SV320XVT / SV370XVT / SV420M / SV470M / SV420XVT1A / SV470XVT1A /
VECO320L1A / VO22L / VO32 / VO37 / VO47L / VOJ320 / VOJ370 / VP322 / VP42 HDTV20A / VP422 / VS420LF1A /
VU42 / VW32 / VW37 / VW42 / VX20 / VX32 / VX37 HDTV10A /VX42

Push "Menu" on remote and then push "Vol-" and "Input" on keypad

GV46 / P50HDM / P50HDTV10A

Press "Ch-" and "Ch+" buttons together once on keypad

GV42 / L42 / VP42HDTV10A / VP50 / VX37

Press and release "Menu" on keypad. Hold "Ch-" and "Ch+" buttons on keypad, then hold "Menu" on remote.

P42

Hold "Ch+" and "Ch-" along with "Power" on keypad. OSD will show "F" on right bottom portion of OSD.

VM60P

Press "Info" on remote, then press "Right Arrow," "Down Arrow," "Left Arrow," "Up Arrow," "Right Arrow."
The TV will show "Enter Factory Mode." Press "Menu" after message disappears and go do to "Setup."

GV47

Press "Menu" then press the following combination: "Info," "8," "2," "0," "6."

SV420M / SV470M / VF550M / VF550XVT1A / VF551XVT / VL260M / VL320M / VL420M / VL470M / VO320E /
VO320EP8 / VO370M / VO420E / VP504 / VP505

Press "Menu," and then press "2," "4," "8," "9."

SV420M / SV470M / VF550M / VF550XVT1A / VF551XVT / VL260M / VL320M / VL420M / VL470M / VO320E /
VO320EP8 / VO370M / VO420E / VP504 / VP505

Press "Menu," and then press "2," "4," "8," "9."

VA19 / VA22LF / VA220E / VA26

Press "Menu" and then press the following combination: "0," "6," "2," "5," "9," "6"

VA320E / VA320M / VA370M / VT420M / VT470M

Press "Menu" and then press the following combination: "1," "9," "9," "1"

VW22 / VS370E

Press "Mute" once OR "-" twice (the dash next to the "0") and then press the following combination: "9," "8," "7," "6"

swanky

[CraigR]

Re: Factory Resets Listing

55" Vizio SmarCast E55-E1
Locate the buttons on the side of the TV, you should find 4 of them. The bottom two would be input and volume down, these are the two we need.

You would need to press these two together for 5-10 seconds, until a bar appears on the top of the TV. Then, you need to press the input button (the bottom button) for 5 seconds, until the screen goes black. This would cause a factory reset to the unit.

[steves7839]

Re: Factory Resets Listing

I have a Samsung UN65KU650D curved 4K LED TV I need to reset. It has a 5-way power joystick on the rear. The remote is mini sized and has a scroll wheel and few buttons but no number keypad. Is there a reset procedure for this set?

[dukatell]

Re: Factory Resets Listing

Does anyone know how to get into maintenance menu for Sceptre E555BV-FM or X505BV-FM my picture is upside down and negative thanks in advance.

[Gavino_varne]

Re: Factory Resets Listing

Can some one please help with some guidance here please. how do i reset my Skyhi television which is not going any further than android screen. Pleeeeese help

[Gavino_varne]

Re: Factory Resets Listing

Hi Can anyone out there please please help. I have a Skyhi TV with the main board being TP.MS608.P83. The TV stands on Android loading screen and does not go any further. Please help if I could do some sort of reset or if I could get a firmware for the same

[Gavino_varne]

Re: Factory Resets Listing

Hi I have a Skyhi 32 LED TV which is struck on android screen and does not go any further. I have tried multiple reset combinations from your forum's assistance and nothing seem to work. The main board on my TV is TP.MS608.P83 Could I know the combination for this mother board for a reset please ?

Thanks in advance. I am new to this forum and I dont see an option to ask a query, so If I have not come the right way, I apologise. Request help plzzz.

[Shariroxx]

Re: Factory Resets Listing

Hi there, I am a first time user on this forum, so forgive me if I'm not in the correct spot. I am looking for factory reset code for an 65" olevia lcd tv.

[dreamerx213]

Re: Factory Resets Listing

Hi I have a Insignia ns-55d510na17
The other day i stumbled across the service menu and changed the white balance settings. How can I reset them to factory defaults ?

[tcolwell]

Re: Factory Resets Listing

Hope this will help someone.

where'd you get this? i'm looking for something similar for my samsung UN39FH5000 remote

[billydanger]

Re: Factory Resets Listing

Have a Sony Bravia KDL-40SL140 with no remote. According to service manual I should (using the remote) enter

DISPLAY 5 volume + POWER

to enter service mode. Since I have only a systemlink 3 universal remote (no DISPLAY key) does anyone know a way to enter service mode without a remote (or with universal remote)?

Thanks in advance.

[Gerry9]

Re: Factory Resets Listing

Thank you for your list of codes. I had been looking for the RCA code and voila, you had it. It fixed my problem which was the following:
Source was stuck on pc input. Even if changed to another input, it just came back to the pc input. Problem solved with resetting tv to initial manufacturer settings.

[Korgano]

Re: Factory Resets Listing

This may not be the right place to post this question however being new here I thought it the best place. I have a Hisense 40d50p and i'm trying to prevent it from overscanning on my PS4. I have set the screen mode to PC which eliminates the overscan but prevents me from setting sharpness and colour. I have entered the service menu and changed the settings in there. Now for my question how do I get the settings to apply after I have turned the TV off or changed the input? I have searched all over google but can't find an answer so any help would be greatly appreciated.

[ernest79336]

Re: Factory Resets Listing

Hello everyone i had a DYNEX DX-LCD26-09 that when you turn it on it would just have a white screen no buttons would work menu,input,ect I bought a new main board for it still no change.Then i hooked up a Roku to it via composite held down the input button and the vol down all the sudden it started working i hope this will help someone