lg 32lg3000 white screen faint picture

[flocko]

Re: lg 32lg3000 white screen faint picture

test 2 all pins to ground ic1105 p1 0v p2 3.30v p3 5.10v ic1102 p1 0v p2 1.25v p3 3.29v ic1106 p1 0v p2 3.30v p3 5.70v ic1107 p1 0v p2 2.49v p3 5.07 ic1108 p1 0v p2 1.8v p3 3.30v

[selldoor]

Re: lg 32lg3000 white screen faint picture

This is no use - apart from the fact that its hard work reading a long list of numbers set out like that, we need the part number off the regulator. Like it says in the link eg:
ic1105
AZ10975
-3.3E1 ****
717K24
Pin 1= 0.00v
Pin 2= 3.30v ****
Pin 3= 5.10v
Then we can tell at a glance it is ok ****

[flocko]

Re: lg 32lg3000 white screen faint picture

ic1105

AZ10853
-33E1
727k24
pin1 0v
pin2 3.30v
pin3 5.10v

ic1102
AZ1085S
-AOJE1
833J53
pin1 ov
pin2 1.25v
pin3 5.10v

ic1106
AZ117d
-33E1
838J48
pin1 0v
pin2 3.30v
pin3 5.70v

ic1107
AZ1117D
-25E1
826N56
pin1 0v
pin2 2.49v
pin3 5.07

ic1108
AZ1117D
-18E1
838J25
pin1 0v
pin2 1.80v
pin3 3.30v

[tom66]

Re: lg 32lg3000 white screen faint picture

All appear to be functional.

[selldoor]

Re: lg 32lg3000 white screen faint picture

Sorry if I missed it but can we go back to the OSD - Tom asked if you could see the menus clear and bright or something and you came back and said no -washed out.

Now - Presumbly you can see the menus as you have adjusted colour/brightness?

So when you tried the button press for the SERVICE menu could you see that at all?

[flocko]

Re: lg 32lg3000 white screen faint picture

Hi selldoor thanks for the reply after Tom said the regulators looked ok i then pulled it apart and listed the parts on ebay as it looked more and more like the panel had gone? not all bad news though power board has sold already if the two t-cons sell i will be out of the woods thanks again to you and Tom for your time and patience Yours Flocko

[vign]

Re: lg 32lg3000 white screen faint picture

I have a 32 inch LG 32LG3000 LCD TV. I changed the t-con board but I do still see only solid multi coloured vertical lines. As usual, the sound works fine but no picture at all. And, How to remove the metal frame on this model please. There is no screws on the top or side. I want to see tab bonds on this TV but there is no way I can remove metal frame on it!! Any solution please?! Much appreciated in advance.