Need Some Help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • burner6999
    Senior Member
    • Jun 2012
    • 89
    • United States

    #1

    Need Some Help

    I have a Nuvision NVU53FX that I am trying to trouble shoot. It has no power. It has no lights or anything on. When I plug it in with the back off the relay doesnt even click. I have 2 of the same models and switched the power supply with the other and it worked. Meaning this tv worked with the other tvs power supply. I have taken a picture of the board and Circled the relay that clicks when plugged in on the working tv. Could this relay be bad? Is there anything else between the incoming power and that relay. Besides the fuse that is. Is there a way to test the relay on board? Also the relay is a JZC-36F 005-HSLT
    Can you give me a link to one that will work from digkey?
    Attached Files
  • PowerAmpFreak
    Badcaps Veteran
    • Feb 2010
    • 977
    • Sweden

    #2
    Re: Need Some Help

    You could short the relay contacts temporary to check if there is a problem with the relay.
    Probably the relay doesn't recieve a proper coil drive voltage, which you should confirm first.
    Probably there is some kind of standby supply that needs to be up and running to supply the relay circuit and other auxilliary stuff. You have to find this supply and confirm that it's outputting proper voltages.

    Comment

    • selldoor
      Slow Learner
      • Dec 2010
      • 7870

      #3
      Re: Need Some Help

      Did you check the fuse and did you check for voltage at both ends of the fuse?
      Do you get any voltage at the BIG Cap -With it plugged in and switched on, Meter on volts 600 DC put red lead on positive leg and black lead on negative leg - polarity is important CARE high voltage & do not touch any heatsinks.
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

      Comment

      • burner6999
        Senior Member
        • Jun 2012
        • 89
        • United States

        #4
        Re: Need Some Help

        Thanks for the response guys. Now it is doing something different. Not sure what changed but now if I plug it in I get nothing, but if I let it sit for a couple minutes then unplug and plug back in relays click but wont turn on but the light on the front changes colors like it does when it comes on. Also when it does this the light doesnt flash like it normally does when it comes on. Normally the light goes from red to blue then blinks 4 times, then turns on. Then if I unplug and plug it back in again the relays click and then it turns on and will stay on. But if I turn it off and let it sit, it wont turn back on. The light on the front changes like it is coming on but it doesnt blink and the tv doesnt come on. Then if I unplug and plug it back in it will work like normal again. I think it is only the power supply cause it does the same thing in both tvs. But the working power supply makes both tvs function like normal. I am so confused. What could be causing this now?
        Last edited by burner6999; 08-02-2012, 03:44 AM.

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK

          #5
          Re: Need Some Help

          Classic bad startup cap or bad main caps issue.
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • selldoor
            Slow Learner
            • Dec 2010
            • 7870

            #6
            Re: Need Some Help

            Still do the test on the BIG cap - do it in each fault state.
            Please upload pictures using attachment function when ask for help on the repair
            http://www.badcaps.net/forum/showthread.php?t=39740

            Comment

            • multimeter
              Badcaps Veteran
              • Jan 2011
              • 739
              • united kingdom

              #7
              Re: Need Some Help

              check these caps marked in red
              Attached Files
              fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!

              ----------------------------------------------
              please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!

              Comment

              • burner6999
                Senior Member
                • Jun 2012
                • 89
                • United States

                #8
                Re: Need Some Help

                ok so I tested the caps. The main cap (Big one) gave me 400V. The other ones I marked the readings on the picture. The best I can tell the are all 50V caps
                Attached Files

                Comment

                • multimeter
                  Badcaps Veteran
                  • Jan 2011
                  • 739
                  • united kingdom

                  #9
                  Re: Need Some Help

                  Originally posted by burner6999
                  ok so I tested the caps. The main cap (Big one) gave me 400V. The other ones I marked the readings on the picture. The best I can tell the are all 50V caps
                  what readings are these?,capacitance,voltage,esr?
                  fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!

                  ----------------------------------------------
                  please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!

                  Comment

                  • burner6999
                    Senior Member
                    • Jun 2012
                    • 89
                    • United States

                    #10
                    Re: Need Some Help

                    Voltage.

                    Comment

                    • multimeter
                      Badcaps Veteran
                      • Jan 2011
                      • 739
                      • united kingdom

                      #11
                      Re: Need Some Help

                      you need to test them for esr,do you have a esr meter?
                      fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!

                      ----------------------------------------------
                      please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!

                      Comment

                      • burner6999
                        Senior Member
                        • Jun 2012
                        • 89
                        • United States

                        #12
                        Re: Need Some Help

                        No I do not.

                        Comment

                        • multimeter
                          Badcaps Veteran
                          • Jan 2011
                          • 739
                          • united kingdom

                          #13
                          Re: Need Some Help

                          it does sound like you have a startup cap problem,but could be other things though,do you have a hot air gun/hairdrier?
                          fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!

                          ----------------------------------------------
                          please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!

                          Comment

                          • burner6999
                            Senior Member
                            • Jun 2012
                            • 89
                            • United States

                            #14
                            Re: Need Some Help

                            I have a hair dryer.

                            Comment

                            • multimeter
                              Badcaps Veteran
                              • Jan 2011
                              • 739
                              • united kingdom

                              #15
                              Re: Need Some Help

                              put the power supply back in the tv,connect all the cables back up,make sure the psu is grounded by fixing it back with its screws,leave the back cover off,use the hair drier on the hot setting.switch the tv on at the mains and its standby,heat the circled caps up ,if these caps have gone high esr,the heat usually will lower the esr enough to get the cap working for a while,.if this dosent work,it still dosent mean that the caps are good and will need to be eliminated by further testing
                              fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!

                              ----------------------------------------------
                              please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!

                              Comment

                              • burner6999
                                Senior Member
                                • Jun 2012
                                • 89
                                • United States

                                #16
                                Re: Need Some Help

                                Ok I will let you know.

                                Comment

                                • multimeter
                                  Badcaps Veteran
                                  • Jan 2011
                                  • 739
                                  • united kingdom

                                  #17
                                  Re: Need Some Help

                                  i forgot to add,as you heat the caps,make sure you cycle the standby switch on the tv or the remote standby,as some tvs need it to turn on
                                  fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!

                                  ----------------------------------------------
                                  please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!

                                  Comment

                                  • burner6999
                                    Senior Member
                                    • Jun 2012
                                    • 89
                                    • United States

                                    #18
                                    Re: Need Some Help

                                    Ok I did that and now it is doing nothing again. I did notice that when it isnt working I get no power to the circled area. From the plugs I only get 5v and 3v Nothing on the 24v, 14, or 12v pins.
                                    Attached Files
                                    Last edited by burner6999; 08-02-2012, 05:02 PM.

                                    Comment

                                    • budm
                                      Badcaps Legend
                                      • Feb 2010
                                      • 40746
                                      • USA

                                      #19
                                      Re: Need Some Help

                                      You are getting the standby voltages OK, but to have the 24/12V power supply running, it needs to get PS_ON signal from the main board, you need look for the pin on the power supply or on the main board that is labeled with PS_ON, P_ON, etc.
                                      Closed up pictures of the connectors will help.
                                      Never stop learning
                                      Basic LCD TV and Monitor troubleshooting guides.
                                      http://www.badcaps.net/forum/showthr...956#post305956

                                      Voltage Regulator (LDO) testing:
                                      http://www.badcaps.net/forum/showthr...999#post300999

                                      Inverter testing using old CFL:
                                      http://www.badcaps.net/forum/showthr...er+testing+cfl

                                      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                                      http://s807.photobucket.com/user/budm/library/

                                      TV Factory reset codes listing:
                                      http://www.badcaps.net/forum/showthread.php?t=24809

                                      Comment

                                      • burner6999
                                        Senior Member
                                        • Jun 2012
                                        • 89
                                        • United States

                                        #20
                                        Re: Need Some Help

                                        Having trouble with the up close picture but the only thing I saw on there was on/off pin. On it I have power but it keeps jumping from 3.5 to2.9v Back and forth. Edit: Got the pic. The ones circled have the connectors and the big one on the left has the on/off and goes to the main board.
                                        Attached Files
                                        Last edited by burner6999; 08-02-2012, 09:09 PM.

                                        Comment

                                        Related Topics

                                        Collapse

                                        • Tynan Dill
                                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                          by Tynan Dill
                                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                          Upon bringing it home and plugging it up, it showed a standby light.

                                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                          Assuming...
                                          11-22-2024, 01:46 PM
                                        • sam_sam_sam
                                          Mitsubishi CNC switching power supply board dead / relay board bad diode failure
                                          by sam_sam_sam
                                          I was working on this CNC machine today found no keyboard functioning no control relay powering on
                                          The screen powered on and was giving an operation error but the manual was not very clear about what the error exactly was but with a little bit of troubleshooting and finding out that the control relays not powering on and no keyboard functions we narrowed down to this one switching power supply which of course does not have any indicator LED light they are on the keyboard interface/relay controller board

                                          Found shorted diodes on main controller relays there are 3 of them that...
                                          01-07-2023, 05:43 PM
                                        • sam_sam_sam
                                          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                                          by sam_sam_sam
                                          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                                          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                                          03-31-2024, 02:12 PM
                                        • sam_sam_sam
                                          Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                                          by sam_sam_sam
                                          I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                                          I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                                          07-01-2024, 06:34 AM
                                        • CMCM
                                          Russound CA4 Power Supply Repair
                                          by CMCM
                                          Hello Everybody,

                                          Trying to repair a power supply from a Russound CA4 Multizone Controller (picture attached)

                                          Russound no longer supports it but were kind enough to provide a schematic of the power supply (pdf attached).

                                          The outputs marked 12v and 20v are all measuring only 1v.

                                          The board is clicking, which I think means it is in something called hiccup mode when the flyback transformers switches because of an internal problem or something else on the board Overloading it.

                                          The capacitors physically look clean (no bludgesor leaks) and...
                                          07-03-2025, 01:12 PM
                                        • Loading...
                                        • No more items.
                                        Working...