Does anyone know the flashing code for this set. set goes into protection then I get 8 flashes, unplugging makes no difference. I am also looking for the service manual, Couldn't find it on elektro tanya
Phillips 42PF7320A/37
Collapse
X
-
Tags: None
-
Re: Phillips 42PF7320A/37
What is the chassis number?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Related Topics
Collapse
-
Phillips OLED TV 55P0S9002/05 715G8886-P01-000-004Y Schematic
Brand: Philips
MPN: 55POS900255
GTIN: 8718863012352...-
Channel: Schematics and Boardviews
11-05-2024, 02:45 PM -
-
by learnmoreHello Community,
Would welcome any help on getting a service manaula for the above model (Phillips 75PUS6754/12) TV or anything similar.
Picture intermittently works fine for a day or a minuite then goes off, but backlights appear to remain on.
I thinking troubleshooting TV or using a tape method on the panel but would like some guidance on tracing the signals accurately rather than a trail and error.
Thanks in advance,
LM -
by SarcasticOPGreetings,
I have an iPad Pro 12.9" 6th gen tablet that had a screen replaced about 10 months ago at a repair shop and last week the screen went blank during use. The device was still on, notifications played sound for example. I have replaced the screen twice, both screens are working until I unplug it, at which point I can see that screen is on but is all black. If I press the power button, the backlight goes off, and when I press it again, the image appears for half a second and then the screen goes back to being black but on. This issue is not present at all when the iPad...10-24-2024, 11:55 AM -
by BloopetaPhillips 58PUS7805/12, was told it had sound no picture, sometimes picture would come back then go again?
From what I have seen myself, its just blank illuminated screen. Tried unplugging each ribbon cable from Tcon in turn.
When one is unplugged, I get half sceen, clear picture.
With other unplugged, get half screen but with thin horizontal lines
Any ideas? Or is it likely a bad panel?... -
by awyatt2Phillips 65pfl6502 I came across this set stuck on ble screen, no menu no sound all inputs dead. I'm thinking main board. The tcon wouldn't stop sound. Right or wrong.
- Loading...
- No more items.
Comment