Toshiba 42rv530u picture problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kueberco
    Senior Member
    • Mar 2012
    • 66
    • usa

    #1

    Toshiba 42rv530u picture problem

    I finally got this unit to display a picture. I bought a used main board from an auction site. I've checked all power supply voltages and found them to be correct. I've also tried a different T-con board, But the picture still looks like this. I'm still thinking the main board is at fault. The picture also has a mirror effect, Like its taking the bottom of the screen and inverting it to the top. I would like to know what commonly fails on the mainboard and replace that particular component . Any help or ideas would be greatly appreciated.
    Attached Files
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Toshiba 42rv530u picture problem

    Do you have a bigger picture of the problem? It looks like a failed memory IC, does it affect the OSD/interface too?

    If the board you bought wasn't taken from the same model, or the model it was taken from used a different LCD panel, it's possible it needs to be reconfigured using the service menu, if available.
    Last edited by tom66; 04-03-2012, 08:27 AM.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • selldoor
      Slow Learner
      • Dec 2010
      • 7870

      #3
      Re: Toshiba 42rv530u picture problem

      Not sure why you have started a new thread? - we are still going to need
      decent pictures of the main board front and back and a close up of the
      eeprom so tom can point out the pins to short to reset it.
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

      Comment

      • kueberco
        Senior Member
        • Mar 2012
        • 66
        • usa

        #4
        Re: Toshiba 42rv530u picture problem

        All inputs do the same thing. The menu displays funny as well. When I checked the firmware version it said - 4.2.40.0. Xv540u 4-7-2008. Is that model listed the problem? How would I reconfigure it? Thanks for the help!

        Comment

        • kueberco
          Senior Member
          • Mar 2012
          • 66
          • usa

          #5
          Re: Toshiba 42rv530u picture problem

          Originally posted by tom66
          Do you have a bigger picture of the problem? It looks like a failed memory IC, does it affect the OSD/interface too?

          If the board you bought wasn't taken from the same model, or the model it was taken from used a different LCD panel, it's possible it needs to be reconfigured using the service menu, if available.
          The original picture I took was to large to upload. I have no program to reduce the pixels. I've also tried reseating the ribbon cables as well.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: Toshiba 42rv530u picture problem

            That model number certainly could be causing the problem.

            To enter service mode:

            Set volume using RC to zero.
            Press MUTE twice then release it.
            Hold MUTE down.
            While holding MUTE press MENU.

            Important information from manual - probably relevant to your problem: "Whenever using new MAIN PC board to the set, set the SET-ID data according to panel option data."

            Manual is here:

            Wait 60 seconds for Get Manual link to appear.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • kueberco
              Senior Member
              • Mar 2012
              • 66
              • usa

              #7
              Re: Toshiba 42rv530u picture problem

              Originally posted by tom66
              That model number certainly could be causing the problem.

              To enter service mode:

              Set volume using RC to zero.
              Press MUTE twice then release it.
              Hold MUTE down.
              While holding MUTE press MENU.

              Important information from manual - probably relevant to your problem: "Whenever using new MAIN PC board to the set, set the SET-ID data according to panel option data."

              Manual is here:

              Wait 60 seconds for Get Manual link to appear.
              Going into the service mode rendered my original mainboard useless, I mistakingly changed a setting in there and it the set would not turn on. I need to be absolutley sure what to change in there next time. Can you give a little more detail on what to do in that menu? Thanks.

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: Toshiba 42rv530u picture problem

                Originally posted by kueberco
                Going into the service mode rendered my original mainboard useless, I mistakingly changed a setting in there and it the set would not turn on. I need to be absolutley sure what to change in there next time. Can you give a little more detail on what to do in that menu? Thanks.
                The service manual is your best bet.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • kueberco
                  Senior Member
                  • Mar 2012
                  • 66
                  • usa

                  #9
                  Re: Toshiba 42rv530u picture problem

                  Reloaded pic
                  Attached Files

                  Comment

                  • kueberco
                    Senior Member
                    • Mar 2012
                    • 66
                    • usa

                    #10
                    Re: Toshiba 42rv530u picture problem

                    Anyone have a good reliable source for toshiba mainboards that work when installed? Thanks!

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK

                      #11
                      Re: Toshiba 42rv530u picture problem

                      Originally posted by kueberco
                      Anyone have a good reliable source for toshiba mainboards that work when installed? Thanks!
                      Did the reseller state it was compatible with your model? If so, you should be entitled to a refund because clearly it isn't.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • kueberco
                        Senior Member
                        • Mar 2012
                        • 66
                        • usa

                        #12
                        Re: Toshiba 42rv530u picture problem

                        Originally posted by tom66
                        Do you have a bigger picture of the problem? It looks like a failed memory IC, does it affect the OSD/interface too?

                        If the board you bought wasn't taken from the same model, or the model it was taken from used a different LCD panel, it's possible it needs to be reconfigured using the service menu, if available.
                        Here's a better pic
                        Attached Files

                        Comment

                        • kueberco
                          Senior Member
                          • Mar 2012
                          • 66
                          • usa

                          #13
                          Re: Toshiba 42rv530u picture problem

                          Originally posted by tom66
                          Did the reseller state it was compatible with your model? If so, you should be entitled to a refund because clearly it isn't.
                          Yes, They say they will refund. Is finding a replacement at a reasonable price going to be a hassle? Thats why I'm trying to learn about component replacement for this particular board. Seems all the available boards are refurb or rebuilt, So that leads me to believe that components are available to correct the fault. Thanks Tom66

                          Comment

                          • kueberco
                            Senior Member
                            • Mar 2012
                            • 66
                            • usa

                            #14
                            Re: Toshiba 42rv530u picture problem

                            Originally posted by selldoor
                            Not sure why you have started a new thread? - we are still going to need
                            decent pictures of the main board front and back and a close up of the
                            eeprom so tom can point out the pins to short to reset it.
                            There seems to be four EEPROM chips on the back of the board. 24c02wp is the number on them.

                            Comment

                            • kueberco
                              Senior Member
                              • Mar 2012
                              • 66
                              • usa

                              #15
                              Re: Toshiba 42rv530u picture problem

                              Originally posted by tom66
                              That model number certainly could be causing the problem.

                              To enter service mode:

                              Set volume using RC to zero.
                              Press MUTE twice then release it.
                              Hold MUTE down.
                              While holding MUTE press MENU.

                              Important information from manual - probably relevant to your problem: "Whenever using new MAIN PC board to the set, set the SET-ID data according to panel option data."

                              Manual is here:

                              Wait 60 seconds for Get Manual link to appear.
                              Thanks Tom66! I followed the service manual to get the parameters set. The tv came to life for about fifteen minutes then started to do funny things again. The picture is no longer fuzzy though. Still getting the inverted image. I checked voltages on the power supply, They are all correct while unit is powered up. Any idea what component may be failing on the main board?
                              Attached Files

                              Comment

                              • tom66
                                EVs Rule
                                • Apr 2011
                                • 32560
                                • UK

                                #16
                                Re: Toshiba 42rv530u picture problem

                                Originally posted by kueberco
                                Thanks Tom66! I followed the service manual to get the parameters set. The tv came to life for about fifteen minutes then started to do funny things again. The picture is no longer fuzzy though. Still getting the inverted image. I checked voltages on the power supply, They are all correct while unit is powered up. Any idea what component may be failing on the main board?
                                Did you get the inverted image when it was briefly working?
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                Comment

                                • selldoor
                                  Slow Learner
                                  • Dec 2010
                                  • 7870

                                  #17
                                  Re: Toshiba 42rv530u picture problem

                                  Have you tried with other sources - PC/ DVD - what source are you using.
                                  Please upload pictures using attachment function when ask for help on the repair
                                  http://www.badcaps.net/forum/showthread.php?t=39740

                                  Comment

                                  • kueberco
                                    Senior Member
                                    • Mar 2012
                                    • 66
                                    • usa

                                    #18
                                    Re: Toshiba 42rv530u picture problem

                                    Originally posted by tom66
                                    Did you get the inverted image when it was briefly working?
                                    No. Picture was perfect for about twenty minutes.

                                    Comment

                                    • kueberco
                                      Senior Member
                                      • Mar 2012
                                      • 66
                                      • usa

                                      #19
                                      Re: Toshiba 42rv530u picture problem

                                      Originally posted by selldoor
                                      Have you tried with other sources - PC/ DVD - what source are you using.
                                      Tv and component inputs reveal same picture.

                                      Comment

                                      • kueberco
                                        Senior Member
                                        • Mar 2012
                                        • 66
                                        • usa

                                        #20
                                        Re: Toshiba 42rv530u picture problem

                                        Originally posted by kueberco
                                        Thanks Tom66! I followed the service manual to get the parameters set. The tv came to life for about fifteen minutes then started to do funny things again. The picture is no longer fuzzy though. Still getting the inverted image. I checked voltages on the power supply, They are all correct while unit is powered up. Any idea what component may be failing on the main board?
                                        Reloaded pics
                                        Attached Files

                                        Comment

                                        Related Topics

                                        Collapse

                                        • m1ch43lzm
                                          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                                          by m1ch43lzm
                                          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                                          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                                          05-12-2025, 08:37 PM
                                        • Document Archive
                                          Toshiba Satellite Pro C660-1NQ Specification for Upgrade or Repair
                                          by Document Archive
                                          This specification for the Toshiba Satellite Pro C660-1NQ can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the C660-1NQ boardview and C660-1NQ schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Toshiba...
                                          09-06-2024, 05:27 AM
                                        • huj3r
                                          Sony KDL-40Z4500 LCD with stripes and 9 blinks (possible BGC board or harness problem
                                          by huj3r
                                          Hi there!

                                          I have a Sony Bravia KDL-40Z4500 which shows a colored vertical stripes pattern when turning on, with a central black shadow that slowly dissipates within the first 10 seconds.

                                          Photo of the situation after the black shadow dissipates:

                                          After this behavior the red LED will blink 9 times, then pause for a bit, and blink again 9 times, in a loop.

                                          I checked the manual (available here) and this corresponds to "HFR error", quoting from the manual:

                                          > This indicates HFR Communication error. [ HFR Communication...
                                          08-15-2023, 10:55 AM
                                        • Tynan Dill
                                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                          by Tynan Dill
                                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                          Upon bringing it home and plugging it up, it showed a standby light.

                                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                          Assuming...
                                          11-22-2024, 01:46 PM
                                        • howardc64
                                          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                                          by howardc64
                                          Problem

                                          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                                          08-04-2024, 10:36 PM
                                        • Loading...
                                        • No more items.
                                        Working...