Announcement

Collapse
No announcement yet.

Toshiba 42rv530u picture problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Toshiba 42rv530u picture problem

    I finally got this unit to display a picture. I bought a used main board from an auction site. I've checked all power supply voltages and found them to be correct. I've also tried a different T-con board, But the picture still looks like this. I'm still thinking the main board is at fault. The picture also has a mirror effect, Like its taking the bottom of the screen and inverting it to the top. I would like to know what commonly fails on the mainboard and replace that particular component . Any help or ideas would be greatly appreciated.
    Attached Files

    #2
    Re: Toshiba 42rv530u picture problem

    Do you have a bigger picture of the problem? It looks like a failed memory IC, does it affect the OSD/interface too?

    If the board you bought wasn't taken from the same model, or the model it was taken from used a different LCD panel, it's possible it needs to be reconfigured using the service menu, if available.
    Last edited by tom66; 04-03-2012, 08:27 AM.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: Toshiba 42rv530u picture problem

      Not sure why you have started a new thread? - we are still going to need
      decent pictures of the main board front and back and a close up of the
      eeprom so tom can point out the pins to short to reset it.
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

      Comment


        #4
        Re: Toshiba 42rv530u picture problem

        All inputs do the same thing. The menu displays funny as well. When I checked the firmware version it said - 4.2.40.0. Xv540u 4-7-2008. Is that model listed the problem? How would I reconfigure it? Thanks for the help!

        Comment


          #5
          Re: Toshiba 42rv530u picture problem

          Originally posted by tom66 View Post
          Do you have a bigger picture of the problem? It looks like a failed memory IC, does it affect the OSD/interface too?

          If the board you bought wasn't taken from the same model, or the model it was taken from used a different LCD panel, it's possible it needs to be reconfigured using the service menu, if available.
          The original picture I took was to large to upload. I have no program to reduce the pixels. I've also tried reseating the ribbon cables as well.

          Comment


            #6
            Re: Toshiba 42rv530u picture problem

            That model number certainly could be causing the problem.

            To enter service mode:

            Set volume using RC to zero.
            Press MUTE twice then release it.
            Hold MUTE down.
            While holding MUTE press MENU.

            Important information from manual - probably relevant to your problem: "Whenever using new MAIN PC board to the set, set the SET-ID data according to panel option data."

            Manual is here:

            Wait 60 seconds for Get Manual link to appear.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment


              #7
              Re: Toshiba 42rv530u picture problem

              Originally posted by tom66 View Post
              That model number certainly could be causing the problem.

              To enter service mode:

              Set volume using RC to zero.
              Press MUTE twice then release it.
              Hold MUTE down.
              While holding MUTE press MENU.

              Important information from manual - probably relevant to your problem: "Whenever using new MAIN PC board to the set, set the SET-ID data according to panel option data."

              Manual is here:

              Wait 60 seconds for Get Manual link to appear.
              Going into the service mode rendered my original mainboard useless, I mistakingly changed a setting in there and it the set would not turn on. I need to be absolutley sure what to change in there next time. Can you give a little more detail on what to do in that menu? Thanks.

              Comment


                #8
                Re: Toshiba 42rv530u picture problem

                Originally posted by kueberco View Post
                Going into the service mode rendered my original mainboard useless, I mistakingly changed a setting in there and it the set would not turn on. I need to be absolutley sure what to change in there next time. Can you give a little more detail on what to do in that menu? Thanks.
                The service manual is your best bet.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment


                  #9
                  Re: Toshiba 42rv530u picture problem

                  Reloaded pic
                  Attached Files

                  Comment


                    #10
                    Re: Toshiba 42rv530u picture problem

                    Anyone have a good reliable source for toshiba mainboards that work when installed? Thanks!

                    Comment


                      #11
                      Re: Toshiba 42rv530u picture problem

                      Originally posted by kueberco View Post
                      Anyone have a good reliable source for toshiba mainboards that work when installed? Thanks!
                      Did the reseller state it was compatible with your model? If so, you should be entitled to a refund because clearly it isn't.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment


                        #12
                        Re: Toshiba 42rv530u picture problem

                        Originally posted by tom66 View Post
                        Do you have a bigger picture of the problem? It looks like a failed memory IC, does it affect the OSD/interface too?

                        If the board you bought wasn't taken from the same model, or the model it was taken from used a different LCD panel, it's possible it needs to be reconfigured using the service menu, if available.
                        Here's a better pic
                        Attached Files

                        Comment


                          #13
                          Re: Toshiba 42rv530u picture problem

                          Originally posted by tom66 View Post
                          Did the reseller state it was compatible with your model? If so, you should be entitled to a refund because clearly it isn't.
                          Yes, They say they will refund. Is finding a replacement at a reasonable price going to be a hassle? Thats why I'm trying to learn about component replacement for this particular board. Seems all the available boards are refurb or rebuilt, So that leads me to believe that components are available to correct the fault. Thanks Tom66

                          Comment


                            #14
                            Re: Toshiba 42rv530u picture problem

                            Originally posted by selldoor View Post
                            Not sure why you have started a new thread? - we are still going to need
                            decent pictures of the main board front and back and a close up of the
                            eeprom so tom can point out the pins to short to reset it.
                            There seems to be four EEPROM chips on the back of the board. 24c02wp is the number on them.

                            Comment


                              #15
                              Re: Toshiba 42rv530u picture problem

                              Originally posted by tom66 View Post
                              That model number certainly could be causing the problem.

                              To enter service mode:

                              Set volume using RC to zero.
                              Press MUTE twice then release it.
                              Hold MUTE down.
                              While holding MUTE press MENU.

                              Important information from manual - probably relevant to your problem: "Whenever using new MAIN PC board to the set, set the SET-ID data according to panel option data."

                              Manual is here:

                              Wait 60 seconds for Get Manual link to appear.
                              Thanks Tom66! I followed the service manual to get the parameters set. The tv came to life for about fifteen minutes then started to do funny things again. The picture is no longer fuzzy though. Still getting the inverted image. I checked voltages on the power supply, They are all correct while unit is powered up. Any idea what component may be failing on the main board?
                              Attached Files

                              Comment


                                #16
                                Re: Toshiba 42rv530u picture problem

                                Originally posted by kueberco View Post
                                Thanks Tom66! I followed the service manual to get the parameters set. The tv came to life for about fifteen minutes then started to do funny things again. The picture is no longer fuzzy though. Still getting the inverted image. I checked voltages on the power supply, They are all correct while unit is powered up. Any idea what component may be failing on the main board?
                                Did you get the inverted image when it was briefly working?
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                Comment


                                  #17
                                  Re: Toshiba 42rv530u picture problem

                                  Have you tried with other sources - PC/ DVD - what source are you using.
                                  Please upload pictures using attachment function when ask for help on the repair
                                  http://www.badcaps.net/forum/showthread.php?t=39740

                                  Comment


                                    #18
                                    Re: Toshiba 42rv530u picture problem

                                    Originally posted by tom66 View Post
                                    Did you get the inverted image when it was briefly working?
                                    No. Picture was perfect for about twenty minutes.

                                    Comment


                                      #19
                                      Re: Toshiba 42rv530u picture problem

                                      Originally posted by selldoor View Post
                                      Have you tried with other sources - PC/ DVD - what source are you using.
                                      Tv and component inputs reveal same picture.

                                      Comment


                                        #20
                                        Re: Toshiba 42rv530u picture problem

                                        Originally posted by kueberco View Post
                                        Thanks Tom66! I followed the service manual to get the parameters set. The tv came to life for about fifteen minutes then started to do funny things again. The picture is no longer fuzzy though. Still getting the inverted image. I checked voltages on the power supply, They are all correct while unit is powered up. Any idea what component may be failing on the main board?
                                        Reloaded pics
                                        Attached Files

                                        Comment

                                        Working...
                                        X