hello i have a good PC PSU which i got from HSC Electronics used for $6 on sale.
now i say the PSU is good but it's not 100% good because i wanted to open the power supply up (just to see how it work) but then i spotted 3 bulging capacitors brand GL [note there are also canicon caps in the PSU]
cap1&2 is a 2200uf 10v
cap3 is a 680uf 16v
now that is the bad ones but there are a lot more and they are not dead or dying should i just replace the bad ones or should i change them all out and what brand cap should i use?
here are some pictures i took
here are the bad caps
i hope you can help. thank you
now i say the PSU is good but it's not 100% good because i wanted to open the power supply up (just to see how it work) but then i spotted 3 bulging capacitors brand GL [note there are also canicon caps in the PSU]
cap1&2 is a 2200uf 10v
cap3 is a 680uf 16v
now that is the bad ones but there are a lot more and they are not dead or dying should i just replace the bad ones or should i change them all out and what brand cap should i use?
here are some pictures i took
here are the bad caps
i hope you can help. thank you
Comment