-
-
Re: stop electricity meter method
This 2- LED infrared light captured hours of work we want to do the work I wanted to work on the deviceComment
-
Re: stop electricity meter method
still currentComment
-
Re: stop electricity meter method
search for all info on IEC 62056
like so.
https://duckduckgo.com/?q=IEC62056&k...t-wt&kv=1&kh=1Comment
-
Re: stop electricity meter method
read thisComment
-
Re: stop electricity meter method
open this counter open a control circuit made as to close off Biliran during the day as at nightComment
-
Re: stop electricity meter method
There are counter to the laser light in the LED holding syac the stroke rate dropped 2 units bilirmiyim counterComment
-
Re: stop electricity meter method
When the electric meter running, it will not work against yapılazm of a circuit that will interfere with the operation of this circuit runs counter counterComment
-
Re: stop electricity meter method
When an electrical engineer put in a place close to the rev counter has made a rev counter does not work when trying to counter this has been the opportunity to cut our electrical circuit in such a transaxleComment
-
-
-
Re: stop electricity meter method
The AC adapter is used in the video above volts AC or DC volts but because timer stopsComment
-
Re: stop electricity meter method
That box looks like some kind of RF generator.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: stop electricity meter method
https://www.youtube.com/watch?v=aDFUNUYECiYrf modülatörine benzeyen tip bişi yapabilirmiyiz çünkü işimize çok yarayacak ben bunu ac adaptöre benzetin kablo ucu 2 adet var sanki manyetik alanla sinyali öldürüyor bunu yapabilirmiyizComment
-
Re: stop electricity meter method
Uh, isn't this illegal? I'm not helping anyone doing that.Muh-soggy-kneeComment
-
Re: stop electricity meter method
It would be very better if you make this circuit I have only used the google translation sometimes missing wordComment
-
Re: stop electricity meter method
Yeah, that way you won't be the one who gets in trouble ... looolMuh-soggy-kneeComment
-
I read EBOOK of Testing Electronic Component and found that
"In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."
Is it really possible to test small ceramic disc capacitor with analogue... -
I don't know if anyone here has experience with Japanese slot (pachislo) machines, but I sure hope so. I bought this machine last week in semi-working order. It would play and the reels would spin, but the stop buttons would not stop them at all. I found that the high-frequency filtering tantalum capacitor was bad on the reel stop board, along with the fuse being blown. I replaced the fuse and removed the capacitor. I haven't replaced the cap yet because I didn't have one on hand, but it's not necessary for the operation of the machine.
The issue now is the Stop buttons are intermittently... -
I have had with regular AA batteries that leak this meter is expensive new I already replaced the battery battery clips once and the same thing happened again and I am tried of so it is getting modified to accommodate lithium ion batteries that are the same size excluding the positive terminal and removing the battery clips I will have enough room for the BMS protection board
I going to put 3 lithium ion battery in parallel with the BMS protection board and a way to charge the battery externally and heat shrink the battery pack and use a JST connector so I easily remove the battery... -
Hi
I want to change the scale of an analog meter, to monitor the charge of an li-ion single cell, so the needle at the end would point 4.2 volts and the 0 on the meter would point 2.5 volts or so, i tried to add diodes or a zener in series with the meter but the changes of the ambient temperature also changes the voltage value on the meter
I wonder how i can accomplish this so the meter would be precise at any temperature ?
Thnaks -
Greetings, new guy here but always interested in the crazy universe of modding
We just finished construction of around 25 vacation houses, all inside the same private area.
Each house has 3phase power , and we bought an atlas MK10 meter for each house (25 meters total ! )
The metering on a per-house basis is done privately. Its not done by a utility company. The utility company will only charge us for the total consumption of all 25 houses together.
Id like to do a small modification on the firmware of our MK10 to make it easier identify each house's...05-20-2025, 09:09 AM
Comment