A665 3DV6 (la-6062p)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mazloum
    Badcaps Veteran
    • Sep 2012
    • 499
    • Lebanon

    #1

    A665 3DV6 (la-6062p)

    hello
    the customer brought this lap with charge ok but cannot switch it on.
    i found the switch connector on board not good , so i tried with the 2 pins of switch, the laptop goes ok , i decided to change this connector, after that the laptop powers on for 2-3 sec with no screen and shuts off. i found U11 hot and found the pins 1-2-3 of the bios 1.1v
    Last edited by mazloum; 02-09-2014, 12:34 AM.
  • dj_ricoh
    Badcaps Legend
    • Jan 2013
    • 2073
    • uk

    #2
    Re: A665 3DV6 (la-6062p)

    do you know how to power without the power button?
    the media button(touch)
    Attached Files
    Just cook it! It's already broken.

    Comment

    • mazloum
      Badcaps Veteran
      • Sep 2012
      • 499
      • Lebanon

      #3
      Re: A665 3DV6 (la-6062p)

      onow it is powering on but only for 2-3 seconds

      Comment

      • whaldsz
        Badcaps Veteran
        • Apr 2013
        • 395
        • Philippines

        #4
        Re: A665 3DV6 (la-6062p)

        what do you get before and after you press the power button:
        1. at pin 8 and 17 of PU6?
        2. at pins 3,7,8 of U22?
        3. PL4, PL5?
        4. ON/OFFBTN#?

        Comment

        • mazloum
          Badcaps Veteran
          • Sep 2012
          • 499
          • Lebanon

          #5
          Re: A665 3DV6 (la-6062p)

          pu6: at pin 8= 3.3v before and after the same at pin 17= 5. v before and after
          u22 bios: pin3=1.11 pin7=0.27v and pin 8=1.1v also the same before and after.
          pl4=3.34 and pl5=5.1 v also the same before and after pressing power
          the only thing that i get when i press the power button is a lighting led for 2or 3 seconds then goes off again, no fans no display at all

          Comment

          Related Topics

          Collapse

          • corrize
            Where to find a very small fpc connector 0.3mm between 2 pins ?
            by corrize
            Hello, I search this connector (oxydated).
            It's a fpc zif low profile connector. It come from camera sensor, it is very small : 0.3mm between 2 pins.
            I ordered 2 from Aliexpress called « 0.3mm pitch » but one was 0.5mm between 2 pins and the other 0.6mm. In fact « 0.3mm pitch » seams to be the pad width and not the distance between 2 pins.
            I can't find it. The other websites like mouser dont show the datasheet, and I can't check if it is 0.3mm between 2 pins ?


            Do you know how to find this connector please ? What is the exact name for find it ?

            ​...
            08-06-2024, 05:25 PM
          • CG2
            Meaco Arete One / Deye Dehumidifier not working
            by CG2
            I've got a dehumidifier that has stopped working. Plug it in, press the power switch, and it beeps 5 times. Nothing showing in the display (which is just two 7 segment displays) apart from the two decimal points flashing. The model is a MeacoDry Arete One 18L, which seems to be a rebadged Deye (all the boards are marked Deye). Here's what I've got so far (details in case anyone else in future should need them).

            Starting with the power board. Mains power comes in at the red connector top left. The compressor is powered by the orange connector to the right of that and is switched by...
            08-17-2024, 07:47 AM
          • trepachka
            Nintendo Switch HAC-001 LCD connector
            by trepachka
            If I removed the LCD connector while the battery is still plugged in, did this damage the logic board like it would a laptop? This is my first time working on one and not only did I forget to unplug the battery when removing the logic board but after I replaced the USB-C port, I broke the clip that keeps the LCD connector snug to the logic board.

            I can replace the LCD connector if I knew the logic board was ok. I secured the LCD connector with a piece of Kapton tape. The console is charging but when power button is pressed, I only get backlight. So, I don't know where the logic...
            10-15-2023, 12:14 AM
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • reformatt
            Lenovo NM-A921 (Yoga 900-13ISK2) dead
            by reformatt
            This machine has been in a few times with an intermittent fault of not charging. Motherboard is NM-A921 (https://www.badcaps.net/filedata/fetch?id=2051581)

            So back again now, not working at all. Previously the adaptor had been replaced along with the DC charge port. This is one of these trapezoid shaped orange USB ports that Lenovo were using prior to going USB-C. It has 4 pins, but the DC connector jack on the PCB has 5 pins.

            Fault presentation was the adaptor is only producing 5.2V, not 20V and this isn't reaching the input of the NVDC charger (PQ5/PQ6). There are 5...
            02-05-2025, 05:24 PM
          • Loading...
          • No more items.
          Working...