speedstream 2624 (Siemens S***)
Beware of Siemens S*** 
i bought one of these wireless b routers with built in print server at a goodwill(5 bucks) about 6 months ago. was using it until tonight when it stated to act funny. I opened it up to find a bulging Tocon cap.
i thought Siemens (the manufacturer of speedstream) was a good brad that kept out of this crap. nope.
since its old and kinda obsolete, i may not re-cap it.
has anybody else had this happen with siemens
i bought one of these wireless b routers with built in print server at a goodwill(5 bucks) about 6 months ago. was using it until tonight when it stated to act funny. I opened it up to find a bulging Tocon cap.
i thought Siemens (the manufacturer of speedstream) was a good brad that kept out of this crap. nope.
since its old and kinda obsolete, i may not re-cap it.
has anybody else had this happen with siemens
but anyway i havent seen many good caps in networking equipment except for cisco and also recently 3com. its the easiest thing to recap networking equipment and restore to full functionality again.
). and the touch area there is not working, maybe if I am able to touch the most right bottom in a maybe 1 square millimeter area it works. also generally if I touch the normal place where the start stop icon is, the weight + and - areas register so there is a touch calibration problem in that area. All icons maybe 60% of the left side register correctly in their respective size. Siemens service recommends replacing the control pcb and screen (nearly...
Comment