Proview cy-565 or

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • FIXITNOW
    Senior Member
    • Jun 2008
    • 128
    • UK
    #1

    Proview cy-565 or

    model in front of me is cy-565
    beleve lt-541f has same inverter

    some one else has been at this before me !!!!!
    on inverter board C5 mising need to know value 12v i/p so guess 16v cap
    from size guess about 220/470uF
    anyone know for sure value ??

    paper label on inverter marked
    sampo loo67a
    849-200-0005a
    IE2A24-R/02A23
    ACER DISPLAY

    in silk screen marked
    Sampo QPWBGL017IDLF4
    J-3-D1-V0 94V-0

    Cheers
    Vince
    Tags: None
    • PlainBill
      Badcaps Legend
      • Feb 2009
      • 7034
      • USA
      #2
      Re: Proview cy-565 or

      It's been said many times. A picture is worth a thousand words.

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

        Comment

        • Bobdee
          Badcaps Veteran
          • Jun 2008
          • 461
          #3
          Re: Proview cy-565 or

          Originally posted by FIXITNOW
          model in front of me is cy-565
          beleve lt-541f has same inverter

          some one else has been at this before me !!!!!
          on inverter board C5 mising need to know value 12v i/p so guess 16v cap
          from size guess about 220/470uF
          anyone know for sure value ??

          paper label on inverter marked
          sampo loo67a
          849-200-0005a
          IE2A24-R/02A23
          ACER DISPLAY

          in silk screen marked
          Sampo QPWBGL017IDLF4
          J-3-D1-V0 94V-0

          Cheers
          Vince
          Hello Vince
          SAME P/VIEW as yours CY-565 Model 568
          Sampo inverter qpwbgl9541dg
          paper tag L0091
          849-400-0005

          Cap is NKEON ? ( looks like nicon first glance crafty SO and SOs
          150uf 30v
          105 C
          F2029
          EVL

          Possible that it yours, marked C5 on the inverter

            Comment

            • Scenic
              o.O
              • Sep 2007
              • 2642
              • Germany
              #4
              Re: Proview cy-565 or

              one i had here for repair had a 25V 470uF Sam Young on the inverter (a 16V cap is enough though.. only 12V getting to the inverter)

              dunno if it's the original cap though..

                Comment

                • EGuevarae
                  Badcaps Legend
                  • Nov 2008
                  • 1336
                  • USA
                  #5
                  Re: Proview cy-565 or

                  Originally posted by Bobdee
                  Hello Vince
                  SAME P/VIEW as yours CY-565 Model 568
                  Sampo inverter qpwbgl9541dg
                  paper tag L0091
                  849-400-0005

                  Cap is NKEON ? ( looks like nicon first glance crafty SO and SOs
                  150uf 30v
                  105 C
                  F2029
                  EVL

                  Possible that it yours, marked C5 on the inverter
                  I agree with Bob. I had notes for two Sampo inverters that have been recaped with 150uf 16v Nichicon caps.
                  There are 10 kind of people in this world: those that understand binary, and those who don't.
                  • ASUS ROG Maximus IX Code
                  • Intel Core i5-7600K 3.8GHz
                  • 16gb GSKILL TridentZ RGB DDR4-3200
                  • 1 M2 SSD + 2 WD Blue 1TB (Mirrored)
                  • Windows 10 Pro x64
                  • GeForce GT1050
                    2 x Acer KA240H + 1 Vewsonic VP2130 21 (a cap replacement job )

                    Comment

                    • FIXITNOW
                      Senior Member
                      • Jun 2008
                      • 128
                      • UK
                      #6
                      Re: Proview cy-565 or

                      thanks folks
                      will order some and see what goes
                      also need to replace the surface mount 2.2uF 6.3volt as its esr is way off
                      cheers

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • x_orange90_x
                          Vizio E55-E1 bad backlights or bad inverter?
                          by x_orange90_x
                          I just got this tv today and it appeared to have no backlight on. After taking off the rear cover and checking again in the dark I can see that MAYBE one quadrant is lit.. But still it's quite dim. I was going to check the LEDs with my tester, and I found LED 1 and LED 2 + pins on the wire from the inverter, but I couldn't identify a ground. Nonetheless I tried using a mounting screw on the inverter board and also the chassis as ground but regardless my tester reads 300 which is what it reads when there is no voltage draw.

                          I don't know how exactly to test the inverter itself. Is it...
                          01-29-2025, 09:24 PM
                        • Gentian
                          APSINT3636VR 3600W APS INT Series 36V DC 230V AC Inverter/Charger schematic
                          by Gentian
                          I have a tripp-lite aspint 3636vr inverter charger which blow some of mosfet transistors. I replaced them repaired also the driver circuit and tested but the mosfets burn again.

                          It work very well as inverter and also as charger if I let the rear switch in auto mode (inverter) and charger only(charging) but in auto when I connect the feed line 220V AC first time it pass ok to line and start charging the batteries but when I remove the feed line it pass to inverter mode and if I do it again the second time when passing from charging to inverter the Main transformer start making a...
                          03-06-2023, 07:07 AM
                        • valvashon
                          Insignia NS-LCD19-09 (PS OK, Inverter problem?)
                          by valvashon
                          For some reason I'm just not going to let this 19" TV defeat me. I guess because I have a schematic to work from I feel like I'm oh so close.

                          History- while adding a turn-on circuit I let a small screw roll under the power board. Worked through all of that circuitry, probably replacing a MOSFET and PWM controller that were not bad but I was following the service manual. Finally figured out that the power supply is in working order when the inverter section (for the backlights) is disconnected. When the +12 supply to the inverter is disconnected the +12 and +5 will come up...
                          1 Photo
                          01-04-2024, 01:44 PM
                        • eccerr0r
                          A modified sine wave inverter + a grid tie inverter?
                          by eccerr0r
                          If I had a solar fed grid tie inverter (GTI), a modified sine wave inverter, and a power outage occurred, what would happen if you disconnected mains, backfed the modified sinewave inverter (MSI) into house power, and hooked up the GTI to the output of the MSI, would it work?

                          Next thing is trying to charge the batteries using solar power, but that's another issue ...
                          08-31-2023, 09:14 PM
                        • caseyjay_48
                          Sony KDL-46BX450 Inverter Troubleshoot Logic
                          by caseyjay_48
                          I am currently on a troubleshoot of 46” Sony KDL-46BX450 tv. I came back from Washington to Texas on medical emergency and had to leave all my tools up there. All I have is a couple of screwdrivers and a dvm. I wish to ask the community a troubleshooting question. Please forgive stupid questions as meds I am taking produce brain fog.
                          I have well maintained Sony KDL-46BX450. It went black one day. After turn-on, I get solid green light and Sony logo in screen center for about 1-2 seconds, then black. No blinking LEDs, no hissing. Flashlight test shows screen characters dimly viewable,...
                          09-23-2022, 08:08 PM
                        • Loading...
                        • No more items.
                        Working...