Re: Samsung LE40R73 backlight issue.
Just had one come my way was recap a year or so ago found this post and tip for joints in transformer TI801 cheers folks
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
Re: 19" LCD Inverter fuse
just got one of these same problem fuse marked with a large S and is about 1206 component size
Leave a comment:
-
Re: Bush IDLCD32TV07HD with Tcon LC370WX4-SLA1 no picture
thanks for the help the silkscreen printed number is in black
and
is
4A108D 1219A1
having trouble finding this one but will keep looking. But was hoping I could replace Q5 as a quick start but can not Id it if that did not cure was going to try the TPS65161 chip
Leave a comment:
-
Bush IDLCD32TV07HD with Tcon LC370WX4-SLA1 no picture
Bush IDLCD32TV07HD with Tcon LC370WX4-SLA1
Beko main board XLX190R-4
PSU FSP312-2m01
Inverter LC370WX4
Tcon LC370WX4-SLA1
Fault set has sound and backlights are on and nice and white
But no picture caps on invert were swollen so replaced
Fuse on tcon was open replaced now have 12v both sides but still no picture
Anyone repaired one of these Tcons or have circuit
It has an TPS65161 buck boast chip fitted and VDD seems to be at 0v which is from transistor Q5 marked L7x3b (note the x has a line under it) it does nor read...
-
Re: Samsung LCD TV LN46C630 wont turn on
circuit if it helps...
Leave a comment:
-
Re: TV Recap - Bush (Alba) LCD2280f1080P
on 171PS15-4 check C171 if fitted and C124 &130 high voltage ceramic capacitors
if you can not test them replace them know to give this fault
different set can have different values post pictures of them so we can id themLast edited by FIXITNOW; 11-12-2014, 01:52 AM.
Leave a comment:
-
Re: LG 42LY95-ZA Power problem.
check ic901 . Its a 3.3 volt regulator on main board
also check caps in this circuit C970 and c920 can also cause problems,
also check the esr of all the 100uf on top right of main board.Last edited by FIXITNOW; 11-04-2014, 08:00 AM.
Leave a comment:
-
Re: 17mb60-4 firmware
please up load firmwares you have in zip file with extra info
Please put these into zip file with a text file holding info
Info need
Make of set
Model number
Board number for instance 17mb60-1 or 17mb61 or 17mb70
Screen type and part number
Product Code on the back Label for instance 37654321...
Leave a comment:
-
Re: 17mb60-4 firmware
vestel tech note for mb70
so works on mb60 mb61 and mb70
also note this need P+ button instead of ok button on remote
so best to try both if trying to upload file
if OK button not work try again with P+ button...Last edited by FIXITNOW; 11-04-2014, 05:59 AM.
Leave a comment:
-
Re: 17mb60-4 firmware
usb stick 17MB60 to cure Flashing Front LED fault which is now getting very common
Could all members do this when they see one of these sets
This is how to
Plug empty USB Stick in to usb port (must be empty else will try coping file from stick into tv !!)
Switch on set Access hidden Menu by
Pressing MENU button then 7935
select
Copy NVRAM data
You should get 2 to 7 bin files maybe more
Please put these into zip...
Leave a comment:
-
Re: Samsung PS-42VPS42V4SXXEU picture fault (red fog)
here is picture of label with voltages
vs is 175 and have checked measures 175
must have recorded it wrong first time...Last edited by FIXITNOW; 03-05-2014, 01:10 AM. Reason: extra info as could not see earlyier replys when typing this
Leave a comment:
-
Samsung PS-42VPS42V4SXXEU picture fault (red fog)
Samsung PS-42VPS42V4SXXEU picture fault (red fog)
this set get a red fog apear from the bottom full width comes and goes
sometimes flashes
sometime only 30mm high. some time nearly full height of screen (see picture)
tv program can be seen behind this red fog
if i scart out to second tv the set has perfect picture
On label
VS 155V
VE 162V
VSCAN -70V
V SET 173 V
VA 70
check all they were all with in one volt of what the label showed
have manual but not sure which board would cause...
-
Re: I-INC IF281d Flashing on and off
give make and values of electrolitic capacitors on psu board
these are usall poor qualty but do not swell up
Leave a comment:
-
Re: Dell U2312HM
I bid pretty low on this stuff. I get out-bid a lot, by a significant amount on a few things I've been trying to get, but I'm not willing to pay that much for broken stuff.
i work to much the same rule
so who is it that pays lots for faulty stuff ???
Leave a comment:
-
Re: I-INC iF281D 2STB
it will proberly be bad caps crack it open and see what power board is fitted
Leave a comment:
-
-
Re: Having trouble locating the following part
this would help one of us will have seen one...
Leave a comment:
No activity results to display
Show More
Leave a comment: