thanks
Cheers jasko
Bobdee
Badcaps Veteran
Last Activity: 10-09-2016, 06:59 PM
Joined: 06-17-2008
Location: WALES UK
-
Re: Clean bga with ultrasonic
thanks
Cheers jasko
Last edited by Bobdee; 12-09-2014, 04:23 PM. -
Re: lenovo t430 no backlight
you need to look at the top of the fuse and see what number or letter is on it
I dont know with a lenovo myself
the dell 1545 that I just done had a p on it, that made it 3A
had to google that info...Leave a comment:
-
Re: Issue with Westinghouse 19" LCD Monitor (large pics)
Hello
The answer to that is NO
But I had much the same problem early today for a short while
May be TC tweaking things...Leave a comment:
-
Re: VA912B Viewsonic, photos, need some help.
Hello
You only have 10 minutes to edit a post
After that nothing can be done to alter it...Leave a comment:
-
Re: HP 1955 Monitor Repair Guide
Jnfurst
You are totally correct if your B/Lights do flash on for a second then your fuse is OK (my silly error)
The reason why I asked was there is a lot of damage to your board, my thoughts are that this fuse should have opened before all of that failure occured on this particular PSU, all the other Benq boards that i have done in HPs, DELLs, BENQs have the usual transistor and fuse failure with plenty of cracked solder joints they have a 3 amp fuses yours has a 5 amp
This fuse seems to be over rated as Krankshaft has mentioned...Last edited by Bobdee; 05-21-2010, 09:57 AM.Leave a comment:
-
Re: HP 1955 Monitor Repair Guide
Hello
If you read Krankshafts post 1 and 7 of this thread it tells you everything you need to check and also everything you need to do to get the Inveter working again
??? Can you tell us if the 5 Amp Inverter fuse PF701 failed or is it still good ???...Leave a comment:
-
Re: Acer AL2423W: Recapped, Still Dead!
Hello
I think THere are 4 fuses
As you have seen F1
There is FS3 black box fuse by connector CNS1
Also FS2 black box fuse by lower H/Sink on right side of board
As well as red box fuse by connector CNS2...Leave a comment:
-
Re: Benq Fp71G / Q7T4 strange situation
Hello again
Have you tried unpluging the connector to the video board that goes to the panel, then power on, if its is the panel then you should be showing a bright white screen that does not turn off untill you turn monitor off.
...
Can you post some picture of top and bottom of PSU/Inverter board, this will help member to help you, they may see something that you may have missedLeave a comment:
-
Re: Benq Fp71G / Q7T4 strange situation
Hello
Have you by any chance replaced a component in back to front (thinking maybe a FU9024N) it has been done by a few of us
...
There are another 4 threads on this Forum with your model Q7T4 worth a read, they may help...Leave a comment:
-
Re: HP w20 LCD Display Inverter, running out of options.
Hello
I have read a few times by members on this forum that these high volt caps rarely fail, but when they do, they burn or bulge out, meaning you can see the failure (no 100% guarantees mind)
So it might save you some money by taking Bills earlier advice and check those CCFLs first...Leave a comment:
-
Re: Compaq 1520 just standby light on
Hello
Check these out on this link
[url]http://www.alldatasheet.com/view.jsp?Searchword=317M[/url]
Page 3 number 110 lm317mdt
Page 6 number 25 lm317ms
Page 6 number 11 lm317mx
...Re: Compaq 1520 just standby light o...7mx<br /> ...Re: Compaq 1520 just standby light...Leave a comment:
-
Re: Bad Power Supply on SCEPTRE X22WG-1080P
Hello, not quite right
The big yellow square is a Transformer
You have the 4 caps in the bottom right corner
Plus the 2 green ones
Then there is a small cap (right next to the big black one that lays on it side), (its is at the top and to the right side of the big black one)
Eight caps in total
Usually the big black one is left alone, that leaves you with just the seven to replace...Leave a comment:
-
Re: Fix for Benq FP737s 17" (Q7T3)
This may help
[url]http://cgi.ebay.co.uk/Lot-4x-C5707-2SC5707-2x-FU9024N-1x-Fuse3A-125V-/290306640904?cmd=ViewItem&pt=UK_BOI_Electrical_Components_Supplies_ET&hash=item43979fcc08[/url]
I have never had a problem buying these from ebay dealersRe: Fix for Benq FP737s 17" (Q7T3)<b...<br /> I have...Leave a comment:
-
Re: Fix for Benq FP737s 17" (Q7T3)
This will do it
[url]http://cgi.ebay.com/LOT-2-FU9024N-IRFU9024N-J598-FQU11P06-STD10PF06-D10PF-/320492401104[/url]Re: Fix for Benq FP737s 17" (Q7T3)<b...92401104[/url]...Leave a comment:
-
Re: Syncmaster 740N PSU problem
Looking at that video link, indicated to me possible faulty CCFLs due to the pinkish looking screenLeave a comment:
-
Re: Dell E196FPf Good News
The parts you mention are Inverter Transformers
It may help contacting
[url]http://www.lcdrepair.us/[/url]
By email I think they may helpRe: Dell E196FPf Good News<br /> <b... they may helpRe: Dell E196FPf Good News
The parts you mention are Inverter Transformers
It may help contacting
[url]http://www.lcdrepair.us/[/url]
By email...Leave a comment:
-
Re: Dell E173Fpf and burnt resis.
Davi.p
I have the E173 and E153 boards with me now
R856 = 15R0 on both boards
Have taken reading on E173 resistor and find it open
So I have taken reading on the E153 and it gives me 15 ohms confirming that it is 15R0
Anything else I can confirm for you, just askLeave a comment:
-
Re: Dell E173Fpf and burnt resis.
Davi.p
R852 = red black silver gold gives you 0.2 ohms with tollerance of 5%
You forget the white as that has something to do with the military failure rating as I recall when I had a problem with same resistorLeave a comment:
-
Re: 220uf/16V small cap.......where to find replacement
Have a look at this it may be what you are looking for
Low profiles
[url]https://www.badcaps.net/forum/showpost.php?p=62538&postcount=17[/url]Re: 220uf/16V small cap.......where ...count=17[/url]Leave a comment:
-
Re: lcd psu problem
Are you sure its a 5 and not a 6
check this out
[url]http://www.alldatasheet.com/datasheet-pdf/pdf/136055/AOSMD/AO4600.html[/url]Re: lcd psu problem<br /> <br /> <...600.html[/url]...Leave a comment:
No activity results to display
Leave a comment: