Re: Wash machine dead help.
THanks guys; machine is not mine ,it's a familiar and they told me it was washing and went dead and there was water licking in the water input hose where it enter the hot water pump,i they called me and went there to tight the hose and then went to turn on machine then i found out it was dead i guess in the middle of washing it had water in the tank,i also suspect TR9 , the issue it has no marks of part # on the top,i think this is a N_mosfet ,you think this or similar will do?
i tested TR9 in and out of circuit with fluke 87 on Diode mode and G to source it, 0.160 either sise
Originally posted by petehall347
View Post
i tested TR9 in and out of circuit with fluke 87 on Diode mode and G to source it, 0.160 either sise
Comment