my neighbor keeps threatening to call the cops whenever i play with HV, i used to just poke fun at it but now i'm not sure if its legal in colorado or not and i can't find anything on the web about it. so does anybody here know about that? maybe lti since he/she lives in colorado to?
is playing with high voltage illegal
Collapse
X
-
is playing with high voltage illegal
Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Tags: None -
Re: is playing with high voltage illegal
my neighbor keeps threatening to call the cops whenever i play with HV, i used to just poke fun at it but now i'm not sure if its legal in colorado or not and i can't find anything on the web about it. so does anybody here know about that? maybe lti since he/she lives in colorado to?
If you are making a lot of noise, then I can see the problem there, but I very highly doubt that messing around with HV is illegal...
Sounds like you got a PITA crazy neighbor there xDMuh-soggy-knee -
Re: is playing with high voltage illegal
cooking dead MOBO'S with MOT'S, ladder to heaven, tesla coils, etc. yah that neighbor is a PITAThings I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
36 Monitors, 3 TVs, 4 Laptops, 1 motherboard, 1 Printer, 1 iMac, 2 hard drive docks and one IP Phone repaired so far....Comment
-
Re: is playing with high voltage illegal
well don't do it in PUBLIC. But, well, if hes annoying you make a 'spark gap transmitter'. that thing puts shit out on every frequency. If you're not doing it in public, no proof. If the guy has no cable and uses an antenna it could mess his reception upCap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM meComment
-
Re: is playing with high voltage illegal
Before the days of cable, the neighbor boy across the street got a go kart. He was an only child and spoiled rotten. That's why I never hung out with him. He would drive that thing around for hours after school until dark. Every day. It ruined all tv and radio reception for the whole neighborhood. Neither him nor his parents cared. Bad neighbor.sigpicThe Sky Is FallingComment
-
Re: is playing with high voltage illegal
Spark plugs = spark gap transmitter?PeteS in CA
Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
****************************
To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
****************************Comment
-
Re: is playing with high voltage illegal
That would hurt!PeteS in CA
Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
****************************
To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
****************************Comment
-
Re: is playing with high voltage illegal
long antenna wire with an exposed area, one to hv, other from the ground, tie them up high in the house, and touch the two exposed areas. Big high voltage interference antennaCap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM meComment
-
Re: is playing with high voltage illegal
It was kind of sad watching him and his friend from down the road. They both joined the Army on the buddy system right after high school. He had some kind of a psychotic break and was kept for almost a year for treatment and then discharged. His buddy just messed up until he got kicked out. Last I heard in the mid eighties they were both doing a five year stretch for residential burglary. First offense and all.sigpicThe Sky Is FallingComment
-
Re: is playing with high voltage illegal
Shit like that IS illegal.36 Monitors, 3 TVs, 4 Laptops, 1 motherboard, 1 Printer, 1 iMac, 2 hard drive docks and one IP Phone repaired so far....Comment
-
Re: is playing with high voltage illegal
yay for digital allot more immune to interference here as long as i don't hook into the house wiring there are no limit to what i am allowed to do. apart from noise, smoke,fire,interference.My pc
CPU : AMD PHENOM II x4 @ 3.5Ghz
MB : ASUS M4A89TD PRO USB3
RAM : Kingston ValueRAM 16gb DDR3
PSU : Cooler Master 850W Silent Pro
GPU : ATI Radeon HD 6850Comment
-
Re: is playing with high voltage illegal
Laws & safety regulations are not the same.
Even when you are about to perform an experiment many precautions have to be taken.
Smart guy is the one who is capable to use experiments as one form of training, cheap laughs and pranks with electricity is a plain sigh of stupidity.
Basically no one gives a shit if you will live or die from the people who are watching the show, only your family members will drop tears for your loss.
Also the most stupid and unrealistic thought is the one which some people think that such extreme experiments with Tesla coils is an act of bravery.
I am an professional electrician which haves come close to huge electrical sources, I am always thinking before I do even the smallest move, that's how I am staying alive its day.Last edited by Kiriakos GR; 06-07-2013, 05:56 PM.Comment
-
Re: is playing with high voltage illegal
I buried it near some high voltage transmission lines next to my house, and I got my free electricity!!
until the power company figured out where their line loss was!
lucky I did not go to jail on that one - lol
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~__________________
the BIG 4
~~~ the top tier of low-ESR electrolytic capacitors ~~~
Comment
-
Re: is playing with high voltage illegal
What Kiriakos said! High voltage is not something to play with! I work with 1KV-10KV P/Ss these days, not super high energy, but definitely very unpleasant if you get "bit" (I've gotten 1.2KV once, 1.6KV once and 4KV once, in a little over 4 years - BTDTGTTS).PeteS in CA
Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
****************************
To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
****************************Comment
-
Re: is playing with high voltage illegal
I've been bit by enough flybacks to know that I use caution when around HV.....and thats pretty mild/low current compared to a lot of other sources of HV... Be careful....but illegal? Not unless you're causing some kind of disturbance or interference with it.<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team StatsComment
-
Re: is playing with high voltage illegal
Flyback belts... that takes me back to the days when I was working in a rental shop refurbing TV's (old thorn sets with delta gun tubes and triplers!) as cheapo rentals for our elderly customers.
The worst part was that those old tubes could keep a charge for a very long time (ever pick up a tube and have one hand on the aquadag, the other just close enough to the 1st anode cap?)
I found the worst jolts came from when I was working on cars and bikes though - the HT on there bit harder than anything I got from a LopTx...Comment
Related Topics
Collapse
-
by sam_sam_samI have a battery operated tab welder and the battery does not have enough current for the battery tab welder because after about 30 welded it does not have the same current output it voltage has gone down by at least 0.500 volts or maybe a more than that
I can fit 21700 battery cells in the enclosure it is very tight fit for four of them that are 35 amp high current capacity 35X4=140 high current output this should work a lot better than what is installed right now
I tested the battery cells there are installed right now and they are testing good with no issues that I... -
by DynaxSCHi Folks
I'm looking for a extreme high current short killer solution for a reasonable cost.
I have an LGA1700 motherboard (ASUS PRIME Z790-P WiFi) where I exchanged the LGA socket already 3 times, and every time after the socket exchange I get a short of power supply lines VCORE (V variable) and VCCIN_AUX (1.8V).
After taking off the socket, the shorts dissappear again.
The soldermask on the socket is already partially demaged from the heat, so I have reconstructed the soldermask by manually painting the missing soldermask parts with a very small top of a...10-15-2024, 10:13 AM -
by harpIs there any reason why high voltage high resistance resistor use weird marking and value on it? Standard nomenclature, EIA value not used?...
-
by karatzdiHello,
I know some might say... just buy another one. Sell it as parts..!
So had this AMP for quite some time. Recently I saw light smoke coming out of the AMP. Had my fire extinguisher close by. Just kidding. Turned immediately all devices off from mains.
Let things cool a bit, and opened up the amp device. I clearly saw on the main board which hosts the 5X amp (5.1), 3 10 ohms 1W resistors had their leads looking black, while the rest of the remaining 2 x 10 ohms were brownish as being installed from factory.
Spent some time downloading the Service...-
Channel: Troubleshooting Audio Equipment
06-11-2024, 08:38 AM -
-
by ictcI'm troubleshooting a Philips MDP 3380/12 Blu-ray player that shows no signs of life. The display remains off, and no buttons respond.
Inside, the power supply is working correctly, and all expected voltages on the mainboard match the service manual specifications. The CPU warms up slightly (checked with a thermal camera), the crystal oscillator is functioning, but the reset signal remains high at all times.
The reset circuit appears to consist of two NPN transistors, one driven by 5V VCC and the other by 3.3V STBY, as shown in the attached schematic. Should the reset... - Loading...
- No more items.
Comment