Imitation is the highest form of flattery...
-
Imitation is the highest form of flattery... -
Re: Counterfeit Samxons
wow......
Big Pope? Any further info on this?<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team Stats -
Re: Counterfeit Samxons
Well, as the saying goes, counterfeiters don't usually counterfeit $3 bills. Hopefully this means that Samxon products are good enough to be worth counterfeiting.PeteS in CA
Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
****************************
To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
****************************Comment
-
Re: Counterfeit Samxons
thats true but anyway if you are sourcing from big pope or topcat then its coming direct from the samxon factory so no worry.Hopefully this means that Samxon products are good enough to be worth counterfeiting.Comment
-
Re: Counterfeit Samxons
Wow, i know this matter from here only today.Originally posted by Topcat
I never heard this matter from them or market in previous period. I guess Samxon's brand is growing up now, it is a good news.
All guys, don't worry. My Samxon caps are sourced from Man Yue Electronics Co., Ltd. DIRECTLY. There is absolutely no fake caps if anyone buy the Samxon caps from me.
Comment
-
Re: Counterfeit Samxons
Thank you for clearing that up Joe. I get my Samxon caps from Big Pope as well, and I can assure you they are genuine.Originally posted by Big PopeWow, i know this matter from here only today. I never heard this matter from them or market in previous period. I guess Samxon's brand is growing up now, it is a good news.
All guys, don't worry. My Samxon caps are sourced from Man Yue Electronics Co., Ltd. DIRECTLY. There is absolutely no fake caps if anyone buy the Samxon caps from me.<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team StatsComment
-
Re: Counterfeit Samxons
Imitation is the sincerest form of flattery.Ya'll think us folk from the country's real funny-like, dontcha?
The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.Comment
-
Re: Counterfeit Samxons
Instead of all the time these fraudsters spend copying other products, they should invest in R&D and offer something decent themselves
Viva LA Retro!Comment
-
Re: Counterfeit Samxons
Update! There is Notice Of Discovery Of Counterfeit Samxon Products (II) released.
http://www.samxon.com/PDF/pressreleasePDF_53.pdfComment
-
Re: Counterfeit Samxons
There is some guy from China selling Panasonic "FL" caps. I don't find any reference to series FL in the literature.Comment
-
Re: Counterfeit Samxons
could that be why we are seeing bad gl and gd in lcd's?Comment
-
Re: Counterfeit Samxons
hmm... i found Panasonic FL series caps on one of my mainboards...
ECS 915P-A Rev. 1.2 (intel 915 chipset, LGA775)
http://upload.wozzap.de/up/FL1.jpg
http://upload.wozzap.de/up/FL2.jpg
they look genuine to me... even the T-vent. and they work fine
weird that they aren't mentioned anywhere (like bgavin said) o.O
edit: they were on the board when i got it. a mix of pannys for the whole VRM area and the rest is full of small OST RLS Series..Last edited by Scenic; 04-17-2008, 03:47 AM.
Comment
-
Re: Counterfeit Samxons
FL FJ FF are genuine series but only made in malaysiaOriginally posted by ScenicComment
-
Re: Counterfeit Samxons
i have seen a ton of gl bad.
they are brown.
the other ones are gf.Comment
-
Re: Counterfeit Samxons
I acquired an MSI board, MS-7210 v3.0, 945GM2H-F.
This board is populated entirely with Panasonc FJ and FL.
Q1: does anybody have a data sheet for FL?
Q2: should these be recapped with MCZ?Comment
-
Re: Counterfeit Samxons
why???Originally posted by bgavin
i have never seen fj or fl bad.
pics?Comment
-
Re: Counterfeit Samxons
That is what I wanted to find out. The ESR numbers are not particularly low for the ones I can identify. I don't have any datasheet for FL, so no clue as to what the ESR values are.
I will put up some photos.Comment
-
After replacing the battery, a message appears at startup: battery counterfeit check error.
Is it possible to modify the bios to remove this message?
https://ftp.ext.hp.com/pub/softpaq/s...0/sp143814.exe02-03-2023, 04:06 AM -
Has anyone seen these?
So far, I've had like 3 counterfeit parts.
One was a TCON board in a guy's TV. I did everything to eliminate the short as far as to drilling out part of the board, and there was some sort of short inbetween the two sides of the board.
Now I'm sitting on two power supplies that seem to make voltage out of thin air.
Not sure what to do. I prefer not to get these bullshit counterfeit Chinese parts as it causes me a ton of trouble between my repairs and sellers.
I have a hunch somewhere they are being swapped in... -
My friend gave me his MBP after he spilled milk in that. I've checked and cleaned all these but when I assembly it then made MOSFET Q6000 broke. Now it's always been high speed. Already try to solder pin 2 to pin 3 of this MOSFET then I couldn't turn it on. Where do I can find a new one or which ways can get it better? I'm a noob in this job. Thank you so much... -
to pick some good quality capacitors for long lifetime do i just go to mouser, rs etc and select the capacitance and voltage then sort by the highest number of hours and pick the caps that have the highest number of lifetime hours? -
Edge lit LED TV has 1/4 section backlight out. Replaced the LED bars and sharing the findings on the original 10k hour LED bar.
These are 6V LEDS (reads ~5.4+ on my LED tester) New bars read about 147V per 1/2 of each bar. Clearly original LED bar has some problems- One section is 153v with a dead LED so clearly built up resistance
- One section flickers but magically fixed itself after driving individual LEDs. All done with an LED tester so don't know if would work driven by PSU backlight circuit and how long it would last
- Connector pin to test pad resistance is nearly 0 ohms.
07-07-2025, 12:18 PM
Comment