Computer fan noise and maintenance

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • bgavin
    replied
    Re: Computer fan noise and maintenance

    For $6, one can buy a new Panaflo fan that will run a very long time.

    Leave a comment:


  • tylerlough
    replied
    Re: Computer fan noise and maintenance

    Originally posted by tazwegion
    I'm curious has anyone tried a dry lubricant like graphite powder
    I have tried graphite on a desk fan that I sometimes use to cool my ram when overclocking it. I couldn't get much in the bearing, most just came out and made a mess. So the result is it stayed quiet for a day or two then I went to oil. Someone else could try graphite on a smaller fan.

    Leave a comment:


  • bgavin
    replied
    Re: Computer fan noise and maintenance

    Isn't Astroglide used when mycoxastickin?

    Leave a comment:


  • willawake
    replied
    Re: Computer fan noise and maintenance

    or astroglide

    Leave a comment:


  • tazwegion
    replied
    Re: Computer fan noise and maintenance

    Originally posted by bgavin
    While at IBM, I learned that dust is the cause of most machine wear, and oil attracts dust. We got longer life from components such as fan bearings by keeping them free of dust and oil.
    I'm curious has anyone tried a dry lubricant like graphite powder (or the superior) Molybdenum disulfide powder (Chemical symbol=MoS2) to lubricate these case fans?

    Leave a comment:


  • gdement
    replied
    Re: Computer fan noise and maintenance

    The replacement need depends a lot on the quality of the fan. I guess in some large-scale situations it's easier to replace the fans on a regular schedule. Another approach (but maybe not worthwhile on a large scale) is to keep tabs on the fan speed and CPU temperature. You can replace the fan once you notice it slowing down, and clean the dust if the CPU temperature has risen. Tracking the temperature saved my sister's computer - it turned out the PSU fan was dead, that thing was baking and yet even the PSU survived.

    I agree with linuxguru that NMB seems to make good fans. If I'm not mistaken, I believe that's the brand of 92mm fans in my 1998 HP Kayak. They're loud but they've been that way since I got the machine a few years ago, I think it's just in their nature.

    My oldest good fan is a small 40x20 (maybe 50x20, not sure) CPU fan which I took from a 1997 Packard Bell. I'm using it on a different Pentium machine. It's by far the most impressive life I've seen from such a small fan. Branded PC's seem to have reliable fans in them to save the manufacturer from service calls.

    Leave a comment:


  • bgavin
    replied
    Re: Computer fan noise and maintenance

    While at IBM, I learned that dust is the cause of most machine wear, and oil attracts dust. We got longer life from components such as fan bearings by keeping them free of dust and oil.

    Replace your fans on regular intervals, same as brake pads or tires. Fans are just service parts, like car parts.

    I rotate my clients' hard drives every 3 years, and (thanks to Badcaps.net) have started rotating power supplies on 3 year intervals.

    I have great luck with Panaflo fans. They have a sealed, oil filled bearing and run very quiet. I have yet to have one make noise or fail. I run the 80mm U12 series on Alpha CPU heatsinks and get an 8~11C delta.

    The fans that die most frequently for me are Antec 80mm case fans.

    Leave a comment:


  • Shroomie
    replied
    Re: Computer fan noise and maintenance

    Careful Pete, you'll make my Delta 120mm exhaust hungry...it's already grinding a bit, so I'll have to oil it soon. Guess it's done fine so far, seeing as I pulled it out of a 1999-vintage HP Netserver (dual P3) that got knocked off by a power surge...

    I'll try these suggestions, thanks guys! I'll let you know how it goes.

    Leave a comment:


  • PeteS in CA
    replied
    Re: Computer fan noise and maintenance

    Did you toss in some minced garlic?

    Leave a comment:


  • Fizzycapola
    replied
    Re: Computer fan noise and maintenance

    Ok I "topped" up the oil in one of my fans to experiment. I won't say what I used though but you can imagine. Lets just say it grows in Italy, working good!

    Leave a comment:


  • Tom41
    replied
    Re: Computer fan noise and maintenance

    One time when a fan in my server PSU started grinding, I took the label off and put a couple of drops of oil on the bearing. Started it up again, perfectly 'silent' again. Although it may need oiling again in the near future, it's beginning to rattle...

    Leave a comment:


  • tazwegion
    replied
    Re: Computer fan noise and maintenance

    I used some suspension dampener oil from my R/C Tamiya Hornet kit... the fan is still going strong & silent

    Sometimes... replacement fans can be hard to source, @ least re-oiling a fan can buy you some additional time

    Leave a comment:


  • gonzo0815
    replied
    Re: Computer fan noise and maintenance

    I recently refurbished ;-) an AC Silent TC fan by adding a bit of motor oil solved in some WD40. The fan dos not move easily. It stoped instantly, if pulled by hand. After lubrication it behaved like a new one. The WD40 will fore shure evaporet fast, but the 10w40 motor oil will probably last for decades. If not, the onwer has to by a new one. I dos it out of curiosity, it was not the main problem i had to fix.

    Leave a comment:


  • Per Hansson
    replied
    Re: Computer fan noise and maintenance

    Originally posted by davmax
    How long does mist oil last? I have found a need to be cautious about oil that can evaporate. I have seen CRC used and this soon evaporates.
    The fans I've used it on still all work just fine... (and they did not before)

    Leave a comment:


  • linuxguru
    replied
    Re: Computer fan noise and maintenance

    Slightly tangential, but I found that the Thai or Chinese-made NMB KL3110-series fans are great, inexpensive replacements for PSU fans.

    Leave a comment:


  • kc8adu
    replied
    Re: Computer fan noise and maintenance

    funny this fan lube subject came up.
    temporarily fixed a bad fan in a hurco bmc40 by feeding it a drop of way lube.
    got funny looks from the operator but it will run long enough to get a new high quality fan.

    Leave a comment:


  • davmax
    replied
    Re: Computer fan noise and maintenance

    How long does mist oil last? I have found a need to be cautious about oil that can evaporate. I have seen CRC used and this soon evaporates.

    Leave a comment:


  • Per Hansson
    replied
    Re: Computer fan noise and maintenance

    I use mist oil, like used in industrial compressed air systems to lubricate the equipment that runs from the air...

    Leave a comment:


  • Fizzycapola
    replied
    Re: Computer fan noise and maintenance

    At the moment I use 2 x Silent Eagle 1000RPM. 1 x Akasa Ultra Quiet 1800RPM intake. 1 x 120mm Akasa Ultra Quiet 1400RPM outlet.

    Silent Eagle
    Akasa Fans

    Theres no immediate issue with the fans. I was just curious to how expertly
    maintain them better.

    Leave a comment:


  • willawake
    replied
    Re: Computer fan noise and maintenance

    the ideal way would be to use quality fans like these ones and preferably not get them dusty in the first place by using dust filters.

    i have had mixed experience with using oil on small fans, sometimes the noise is gone but starts up again later. perhaps my oil is no good?

    funny how a fan can be working without noise for a long period of time like a server on 24/7. then you shut it down and oops a noise starts.

    Leave a comment:

Related Topics

Collapse

  • emil_t
    RTX3090 working fine but fans not spinning
    by emil_t
    Hello guys. I have a problem with a PNY XLR8 GAMING RTX3090 graphics card. The problem is that it displays and works fine, but the fans don't spin at all. The problem occurred when someone else removed the fans in order to clean it and broke one of the fan connectors. He replaced it himself and after that, it wasn't working anymore. I guess he damaged something else in the process. What i have done so far: I found 2 capacitors next to the connector that were in a bad shape, he must have touched them with his tools - they weren't shorted, but i replaced them with similar ones from a similar card....
    04-12-2024, 06:54 AM
  • stvhop
    HP1955L Buzzing noise & interference
    by stvhop
    Hello, This is my first post so please forgive me if I miss out some vital info.
    I have a problem with my HP1955L monitor from 2005.
    The first thing to say is that it is still basically working, ie the picture is fine.
    However it makes an electrical buzzing sound. I know all monitors make some some of hum, but this is louder and more of a buzz.
    The volume of the noise seems to be dependent on how hard the monitor is working; switched on with a blank screen -> no sound; small dialog (like OSD only) -> minor buzzing; full screen picture -> loud buzzing.
    ...
    11-07-2020, 07:13 AM
  • tony359
    Removing electrical noise introduced by fan
    by tony359
    Hi all,

    I am working on a sound processor, it tends to overheat so I fitted a fan inside. The fan is connected to the +15V of the PSU via a DC-DC converter based on the LM2596 to reduce the voltage to around 10.5V.

    Unfortunately the analogue circuitry is picking up the noise from the fan in two ways:
    1. The fan is close to the analogue section, the motor itself gets into the outputs so I'll have to move it somewhere else
    2. Even with the fan running outside of the case, there is still some noise which is clearly going back to the processor via power line....
    11-28-2023, 05:18 AM
  • MegaZAC
    Onkyo TX-SR805 noise in one channel
    by MegaZAC
    Surprisingly enough, this receiver doesn't have the DSP chip issue. The HDMI board does not get hot, and sound over HDMI works fine.

    Regardless of the input, the right channel has noise that is clearly noticeable even on average volume level. The only cases when there's no noise is when VCR input is selected (some tracks on the board are damaged, maybe that's why), or if HDMI input is selected but nothing plugged into it. In all other cases, even when no input is connected I still have the noise.

    There's some logic behind it. As soon as I select an input I get only left...
    04-23-2025, 10:09 PM
  • bulkchart32
    i cannot get rid of the interference in the video on this 1.1v and i have tried everything!
    by bulkchart32
    i recapped the entire foxlink psu with rubycon caps of the exact uf needed. i also purchased a delta psu to see if the different brand would change anything and it did not. i recapped the entire motherboard except for about 5 of the 22uf caps. i used rubycon on everything except the five in front of the processors. i used 5 nichicon polymer caps there. i soldered a wire to each screw hole of the psu and soldered one wire to the metal outer shell and one to a screw hole on the motherboard(to make sure it was all grounded well). i also recently tried disconnecting the power cables from the dvd drive...
    06-19-2025, 02:37 AM
  • Loading...
  • No more items.
Working...