I need help identifying this thermistor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
Previous template Next

Related Topics

Collapse
  • nmbb
    Can not find Model/Value of Thermistor.
    by nmbb
    Machine: Autoclave.
    Brand/Model: SANYO MLS-3780
    Manual: (Sorry search option not working on this PDF)



    Hello guys, this autoclave running with 2 thermistors already connected TH1 and TH3(on CN1,CN2 sockets). One for the water temperture and second one for chamber temperature. But there is another emtpy socket for optional third thermistor CN2 wich is for TH2 for object temperature. I wanna add the third thermistor TH2 to CN2 socket. But i can't figure what model/brand/value i need to use. In manual document, there is no info about TH1 and TH3 model number...
    06-02-2022, 05:55 PM
  • Use2bavolvo
    Magic chef oven - thermistor ref voltage issue
    by Use2bavolvo
    I am having an issue with my wall oven temperature control is ~180f out of spec. The thermistor is measuring correctly but I noticed the ref voltage appears to be off. With the thermistor wires attached it's reading ~3.4vdc with the thermistor disconnected it's around I9.8vdc. my understanding is the temp is read off the resistance from the thermistor which leads me to believe the issue is with the ref voltage.

    Another observation is the temp setting and readout at lower temps is way off meaning the oven thinks room temp is 300f and bake relay doesn't engage unless temp setting...
    01-19-2023, 01:32 AM
  • Quantum IC
    Sony KDL-40BX450 LCD. Thermistor gets too hot 10 seconds after turning on the TV
    by Quantum IC
    Hello every one,
    This TV came to me with the problem that it was totally dead.
    The problem was the two MOSFETs and a fuse resistor in the power supply.
    The original MOSFETs were KF7N50F and I repalced them with SLF65R700S2.
    The original fuse resistor was 0.1 Ohm 1/2W. I didn't find a similar fuse resistor and I replaced it with 0.1 Ohm 5W ceramic resistor.
    When I plug the TV the ST-BY LED turns on, when I press the power button on the TV, the ST-BY LED turns off and the TV doesn't turn on until the second time I press the power button is when the TV turns on,...
    01-14-2022, 12:06 AM
  • fab13
    Thermistor exploded in two when turning on ps4 fat
    by fab13
    Hi there,

    I have a fat PS4 with the fuse (5a) of the power supply which blows with each power on and there was a loud snap in the power supply and again the same problem after replacing the fuse.
    I did not find a short circuit

    The component that broke in two is an SCK 084 thermistor (See photo)
    and measured at 11 ohm

    So far I haven't received a thermistor.

    Do you think that if I replace the thermistor and the fuse it should go away, because I have the impression that there is a strong current demand as soon as you press...
    11-05-2022, 06:29 PM
  • omaar
    Help Identifying an IC
    by omaar
    I need help identifying this IC and, if possible, the value of the capacitors next to it. It is part of the HDMI circuit of an EVGA RTX 2060 GPU. It suffered a short circuit, leaving the graphics card without video and the TV without image....
    2 Photos
    06-06-2025, 07:48 PM
  • Loading...
  • No more items.
Working...