Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
That will work, but It is unlikely the only problem.
That will work, but It is unlikely the only problem.
-
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
Hi Digital Dad, I am in need of that IC also if you still have one you would like to sell. ThanksComment
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
I need the LD7913JGM6. It seems like my pm's aren't getting through to you.Comment
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
I guess my inbox is too full with 30 messages? I didn't think they had a limit.
I have all three of the parts you listed, shoot me an offer.Comment
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
$8 - $10?Comment
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
Did you ever fix this problem, I have the IC901 blown. No standby power. I got a replacement board 001(my board is 002). Unfortunately after swapping the replacement board no power either.Comment
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
Hi Digital_Dad,
I am also looking for the IC LD7913JGM6. I did send a private message as well. Thanks if you can help. MikeComment
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
So, after replacing the IC and the ZDiode, did the TV work? Or did you have to replace other components?Comment
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
Anyone know what is the replacement for diode D901? 1Nxxxx?Comment
-
Re: Vizio E480i-B2 Won't Turn On DPS-167DP IC901
New here so I may need a tiny bit of help posting correctly. I too have the same problem in a Vizio tv set and will need the common repair parts. I can get back to anyone who suggests test results for components in this PS board. My Tv is also dead with a chip blown out of the same I C. It seems to be a common problem and I wonder if it is worth fixing or not. Anyone with spare parts please feel free to message me. Can't contact Digital Dad because i get a message that his message area is full and needs to be cleared out so that messages will go through.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.
Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
Power Board Connector that goes to Main board
CN6401
Pin 01 NC
Pin 02 NC
Pin 03 "BL_ON": 0V
Pin 04 "N/C"
Pin 05 "STBY 3.3V": 3.5V
Pin 06 "GND": N/C
Pin 07 "AC_OFF"... -
I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.
The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.
I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
Comment